Final Cut Pro X :: Mixed Frame Rate Affecting Audio Export
Sep 5, 2014
I’ve got the locked edit in FCPX. 90+ min, 8000 clips.Timeline is set at 23.98, clips on the timeline are some 23.98, but mostly the BMCC 24p. No prob for FCPX. It plays with whatever you throw at it. The problem comes in when I’m trying to export OUT, because the other programs don’t like it. Like I’ve got to get my audio post engineer this AAF for ProTools out with X2Pro. X2Pro doesn’t support this "retiming" that FCPX does and spits out warnings for non-conformance. What to do? Change all the clips to 23.98 or change all the clips to 24p, or is there some other better/easier way to get that audio (with syncing video) out to ProTools?
Info:
Final Cut Pro X, OS X Mavericks (10.9.4), 3.5Ghz intel Quad-core i7, 16 GB RM
View 1 Replies
ADVERTISEMENT
Aug 27, 2014
I've been trying to to export my Audio from FCPX 10.1.3 as Separate Files (per Roles) from a Multicam clip but it stops and freezes after exporting the first Audio track listed in the export setting. Example:
I have a Multicam clip with 3 Audio Roles (Bob, John and Marc, all assigned to their Audio Roles).When i export Audio as Roles (separate files), i then select all the Roles i want to export: Marc + John + Bob. It will export up to 35% or so and freeze.Then i look in the Finder location of the export to see the audio of Marc only.
If i put John + Marc + Bob, i will see the Audio for John only and so on.If (i have to at this point) i cancel the export, the audio file gets deleted and i get nothing out of FCP. Is there a way to export Audio as Separate Roles file from a Multicam clip or do i need to add all the Audio clip separately from the Multicam on the Timeline?
I'm adding the audio in the Multicam clip so that, if i want to remove a chunk of video from the timeline, The audio attached to it will also be removed and everything stays sync'ed after the cut i made.Â
I tried Detaching the Audio from the Main Timeline. I then get the Audio but still in a "multi cam" bundle. When i select that and look in the Inspector, i see all the Roles but i can't Export like i want to.Â
Info:
OS X Mavericks (10.9.4), Final Cut Pro X (10.1.3)
View 1 Replies
View Related
Sep 1, 2014
I have h.264 footage from smartphone with 29.8 fps (container mp4) and converting to ProRes via Compressor i have the issue as follows:
1. If i set automatic fps in Compressor to 30fps, converted footage to ProRes playbacks smoothly.
converted footage available here: [URL] ....
2. If i set automatic fps near original 29.97 fps, converted footage to ProRes playbacks stutters (especially if you pay attention to the part of footage, where child is going toward a house wall).
converted footage available here: [URL] ....
Original footage: [URL] ....
However, if I repeat the same processes in Adobe Encoder, footage playbacks smoothly in both cases:
Footage converted via Adobe Encoder 29.97fps Apple ProRes: [URL] ...
Footage converted via Adobe Encored 30fps Apple ProRes: [URL] ...
It does not matter which type of ProRes i choose, problem persists in all of them under 29.97 fps.
Info:
MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.4)
View 5 Replies
View Related
Mar 6, 2008
'm using my MBA to watch movies on my fullhd TV.
I use the dvi interface to connect to it at 1920 x 1080.
The problem is about the frame rate that after 10 / 15 minutes of flawless palying, drops consistently. I've tried VLC and QT with Perian but the problem is the same.
The only way I can use it, is activate the mirroring function and keep the resolution to 1280 x 800.
The strange fact is that the cpu is quite free and the temperature never goes more than 62 celsius.
I think that the problem could be an overheting of the video adapter. The fan, while I watch movies, is stick to 6200 rpm.
View 3 Replies
View Related
Feb 1, 2010
I have downloaded a few hd videos in .ts format. They are 1280 x 720 59.94 fps and dolby 5.0. I am looking for a way to convert these videos to apple tv. Or convert them so I can bring them to imovie. I have tried roxio toast. But it changes the frame rate and video size. When I customize the output, the quality looks terrible. Is there a way to convert these files but keep the quality and frame rate?
View 2 Replies
View Related
Feb 11, 2012
I just switched to IMac and use to use Pinnacle for home video editing. If IMovie allows you to take a frame from a clip and export it to iPhoto as a jpg for printing and sharing?
Info:
MacBook Pro, iOS 5.0.1
View 2 Replies
View Related
Aug 22, 2014
I am working with a Time lapse and final cut x will not let me make the duration any shorter than 2 seconds. How do I over ride?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Nov 30, 2014
How do I put multiple graphic images into one frame? - so it kind of looks like a video wall - except these are still images. I can do it manually but it's not precise.
Info:
Mac mini, OS X Mavericks (10.9.5)
View 4 Replies
View Related
Dec 9, 2014
I got master which is HD 1920 x 1080 prores then convert it to 720 x 480 widescreen then compressing it to m2v. Notice pixels appear every 1 frame between 13 frames last about 15 sec on m2v. Why is that? Is there other compressor program than apple compressor. I use Compressor 3.5.3.
View 5 Replies
View Related
Jun 5, 2014
I need to transcribe audio files and need an application that will play audio files at double their rate (and half their rate) so that I can quickly go through audio files and then concentrate on the pertinent portions. Any applications for Mac OS X? Free is always good!
View 3 Replies
View Related
Dec 11, 2014
When you export a file (say for example for an Apple Device, 1080) and you view the file in Finder, in the icon view, the file displays a frame from the clip. Is there a way to define what frame in the clip that it uses? Â In the files I've exported, it's not the first frame of the file. It appears to be about 10 minutes in. Â This is the same frame that gets used when you sync the file to an iDevice.
View 3 Replies
View Related
Dec 12, 2014
I'm animating a PNG file in a FC7 project. The image goes from one side of the screen to the other, and I would like to use the ease controls to smooth the movement, but the program does not allow me to do it in the control + J window. I can do it with a video clip, but not with this single frame animation. Is there a way a can do that?
View 1 Replies
View Related
Jun 22, 2014
I need to edit a multiclip squence with three cameras, but all three have different frame sizes. My frame sizes are 680X480, 720X480, and 720X404. What's the best solution?
View 14 Replies
View Related
Aug 2, 2010
My normal workflow is to shoot HDV 1080i60 and import via a Sony HD-700 clamshell via firewire into FCP 6.0.6 working with a sequence set to HDV 1080i60. Depending on my next steps, I'll either export straight from here, do a QT conversion, or transfer the sequence to a Pro Res sequence and export from there. I'll often send a compressed (H.264) file to the client via yousendit. Never has there been a problem with the workflow or the client opening the file on a PC...
Now the other day, for the first time I had to work off of my portable set-up....FCE off a macbook pro and an external 7200 rpm hard drive. I imported with the only available choice (apple intermediate codec) and went about my edit. I exported and sent the file....While the file was fine on my laptop the PC user could only HEAR the QT file but got no picture. I was able to burn a DVD and move the operation to my desktop.
But after countless attempts at troubleshooting, including printing to tape and reimporting, recapturing all the original footage from tape, using my standard sequence settings, etc. I still can only export a QT file that is unable to be properly viewed by PC users.
Information:
Mac Pro (2006), FCP 6.0.6, iWeb 09
Mac OS X (10.5.8)
View 5 Replies
View Related
Sep 10, 2014
How do we make an MXF export with Final Cut Pro X ? Since 2014/09/01 is it no more possible with Hamburg Pro Media...
Info:
Mac Pro
View 6 Replies
View Related
Aug 29, 2014
I was working on a project and trying to export my project.I tried to to export by using 'Export Media', Share>Media Browser, Share>Apple device and nothing works and comes up with an error dialogue like below. I'm using iMac late 2012 with Mavericks.Â
View 5 Replies
View Related
Aug 21, 2014
Someone at work recorded a screen capture video. Within the frame, there's good material but a lot of garbage around the edges that I don't want (what Sally Hogshead would call "screen crapture"). The good stuff lasts the entire duration of the clip, is not perfectly centered, and does not move at all in its placement or change size throughout the clip.Â
If I crop or trim, I can eliminate the garbage, either making it transparent or black (there's no other clip beneath it to show through) easily enough. Is there a way to then export just the desired portion of the video frame (the non-cropped good stuff) as its own video at a smaller frame size?Â
Info:
Final Cut Pro 7, Mac OS X (10.7.5)
View 6 Replies
View Related
Nov 16, 2010
export codec that can give me .mov files that can be used in any quicktime player (mac or pc). Currently exporting to h.264, but it is taking ages...
Second question:
Having troubles too, getting the camera to record in native FCP .mov's. Despite setting to .mov mode in the camera's file format option, it still seems to pump out xdcam ex files...What I want is to record straight sony xdcam files, is there some setting in the camera I am missing?
Information:
G5 DP 2.7
Mac OS X (10.4.5)
LaCie 120G, 40G iPod,
View 7 Replies
View Related
Aug 24, 2014
When i press "send a project to Final cut" in iMovie nothing happens.
The process bar is completed but Final cut doesn't start. I have the 30 days test version of final cut - does that matter?Â
View 1 Replies
View Related
Dec 5, 2014
Final Cut 10.0 won't let me export.Â
Instead I get a message that says 'The operation couldn't be completed (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)Â
View 1 Replies
View Related
Dec 6, 2014
I recently started using the Final Cut Pro X and i want to know how to export the file in the format that will be accepted by youtube as if it is exported with default settings youtube says to upload faster use the given formats.
Info:
iMac (Retina 5K, 27-inch, Late 2014), OS X Yosemite (10.10.1)
View 3 Replies
View Related
Sep 10, 2014
I click on File> Share> Master File, Nothing Happens, Not even an error message. I have tried restarting the application.Also the project seems to render when I click (Render All) but the orange bar does not disappear. I am running FCP 10.1.3 on a Macbook Pro mid 2012
Info:
Final Cut Pro X, OS X Mavericks (10.9.4)
View 3 Replies
View Related
Aug 29, 2014
A client asked me to remove a word from a title (I'm using the Lens Flare title). I removed the word, let it render, and playing back in FCPX, sure enough the word is not there - but when I export it using Share > 720p, the word is back! Three times I've exported the project and each time the word is still there.
FCPX 10.1.3 , OS10.9.4, MacPro 2x2.4GHz Quad
View 3 Replies
View Related
Jun 2, 2014
I have having ongoing trouble with green frames in the export. I have read it could be a rendering problem, however i do not see it when playback in the time line, ONLY when after I complete the edit.Â
Info:
OS X Mavericks (10.9.2)
View 7 Replies
View Related
Jun 3, 2014
I made a movie on FCPX 10.1 and exported it to iTunes. A few days later I try to play it from iTunes and it doesn't work. The original project in FCP is now missing.
I also shared my video with some friends but it doesn't play on thier macs either.
Info:
Final Cut Pro X
View 4 Replies
View Related
Sep 4, 2014
Just updated to Mavericks. Everything worked fine before then.
So I finished my project , go to export, and no response. When I try and export to vimeo or you tube I get this error -
"The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"
Its not a camera import issue. I actually made another project with clips that I know to have exported, with no problem. And again, there is no response when IÂ export project.Â
And I can't uninstall fcpx because I have clips saved to the program. And hard drive is dead. Â
Info:
Final Cut Pro X, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Sep 4, 2014
I have been having an issue exporting my project from FCP X, in which it fails at 75%. I have tried different types of experts from exporting to an apple device to master file and have plenty of space on the Hard Drive/Export destination. I am using a 21.5 inch 2013 iMac. I am connected to a Mac Mini server on a network as well. The video is only like 2:30 long.
Info:
MacBook Pro, OS X Mavericks (10.9), 2011 Module
View 1 Replies
View Related
Mar 16, 2010
Final cut express is stopping exporting at 100% and hanging there for an indefinite amount of time. What is going on? I am using simple Quicktime Exporting options.
View 1 Replies
View Related
Dec 12, 2014
I'm a drummer and use a few different camera's to record my drumming. I have one camera capable of recording 720p or 1080p, but my other 2 only shoot 480p. I want export the whole video after editing in all the different shots, at 1080p or 720p. My problem is, the camera's that shoot 480p, have a border around them, so can I fill in that border somehow?
Info:
MacBook Pro, OS X Yosemite (10.10.1), 2.2ghz i7 quad-core
View 6 Replies
View Related
Jun 6, 2014
I am new to FCP (I also have Motion and Compressor). My computer is new (specifics below in the error message). I have been trying to upload a 10 minute video to YouTube for 2 days without success. FCP drops a lot and last night I tried to compress the video via Compressor and received the message I did not have the YouTube ID or password (after it spent 30 minutes compressing). ?
I have had luck exporting to YouTube before from FCP so it isn't a password problem per se. Granted, those videos were ony 2 minutes long. I do not have a lot of graphics within the video.. it is just long. I shot the video with a Rebel T5i HD 1920x1080 24p. I accidentally changed the settings from 23.98 to 24p prior to uploading this video footage and am unsure whether or not that has affected the upload.
Regardless, I will not do that in the future as I believe I should have left it as 23.98. I also created a 7 second introduction via Motion and imported it into the movie. Would it be better to upload to YouTube on my own? Outside of FCP? I was thinking exporting via Compressor might work, but no luck.
Process:Â Â Â Â Â Â Â Â Final Cut Pro [27080]
Path:Â Â Â Â Â Â Â Â Â Â Â /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier:Â Â Â Â Â Final Cut Pro
Version:Â Â Â Â Â Â Â Â 10.1.1 (240682)
App Item ID:Â Â Â Â 424389933
[Code] .....
View 4 Replies
View Related
