MacBook Air :: External Monitor/frame Rate?
Mar 6, 2008
'm using my MBA to watch movies on my fullhd TV.
I use the dvi interface to connect to it at 1920 x 1080.
The problem is about the frame rate that after 10 / 15 minutes of flawless palying, drops consistently. I've tried VLC and QT with Perian but the problem is the same.
The only way I can use it, is activate the mirroring function and keep the resolution to 1280 x 800.
The strange fact is that the cpu is quite free and the temperature never goes more than 62 celsius.
I think that the problem could be an overheting of the video adapter. The fan, while I watch movies, is stick to 6200 rpm.
View 3 Replies
ADVERTISEMENT
Sep 1, 2014
I have h.264 footage from smartphone with 29.8 fps (container mp4) and converting to ProRes via Compressor i have the issue as follows:
1. If i set automatic fps in Compressor to 30fps, converted footage to ProRes playbacks smoothly.
converted footage available here: [URL] ....
2. If i set automatic fps near original 29.97 fps, converted footage to ProRes playbacks stutters (especially if you pay attention to the part of footage, where child is going toward a house wall).
converted footage available here: [URL] ....
Original footage: [URL] ....
However, if I repeat the same processes in Adobe Encoder, footage playbacks smoothly in both cases:
Footage converted via Adobe Encoder 29.97fps Apple ProRes: [URL] ...
Footage converted via Adobe Encored 30fps Apple ProRes: [URL] ...
It does not matter which type of ProRes i choose, problem persists in all of them under 29.97 fps.
Info:
MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.4)
View 5 Replies
View Related
Feb 1, 2010
I have downloaded a few hd videos in .ts format. They are 1280 x 720 59.94 fps and dolby 5.0. I am looking for a way to convert these videos to apple tv. Or convert them so I can bring them to imovie. I have tried roxio toast. But it changes the frame rate and video size. When I customize the output, the quality looks terrible. Is there a way to convert these files but keep the quality and frame rate?
View 2 Replies
View Related
Sep 5, 2014
I’ve got the locked edit in FCPX. 90+ min, 8000 clips.Timeline is set at 23.98, clips on the timeline are some 23.98, but mostly the BMCC 24p. No prob for FCPX. It plays with whatever you throw at it. The problem comes in when I’m trying to export OUT, because the other programs don’t like it. Like I’ve got to get my audio post engineer this AAF for ProTools out with X2Pro. X2Pro doesn’t support this "retiming" that FCPX does and spits out warnings for non-conformance. What to do? Change all the clips to 23.98 or change all the clips to 24p, or is there some other better/easier way to get that audio (with syncing video) out to ProTools?
Info:
Final Cut Pro X, OS X Mavericks (10.9.4), 3.5Ghz intel Quad-core i7, 16 GB RM
View 1 Replies
View Related
Sep 30, 2010
I am trying to use a WD Elements external HD formatted to Mac OS Extended, and the box says that the HD should have a USB 2.0 adapter, meaning it should transfer over 400 MB/s. Unfortunately for me, I've had many problems with this HD and it is now crawling at around 2.5MB/s, slower than 1.1 speeds. At the moment, it is at 750MB/93.51GB - About 21 hours. This is unexceptable, and I make HD videos, which are usually from 200 - 500 MB, and this would take AGES! I had no problems on my PC with this drive. Please help me! Should I format it to something else, get a new one, or something else? Please leave your suggestions below. Also, if you have an HD that works well, please leave it below,
P.S. All ports are free, except for the one with the HD in it. All that I have hooked up to my Late-2009 21.5" iMac is my wireless Apple keyboard, and my Magic Mouse. Nothing else hooked up to the computer AT ALL!
View 8 Replies
View Related
Jul 13, 2010
I am wondering why my MBP takes about 7-8 mins to copy 700 mb files from the external (Seagate FreeAgent pro 500 Gb) and of course, it takes about 1 hour to copy 7 Gb files.
However, this problem has occurred only copying file from external to my MBP, the transfer rate is fine when copying files from MBP to external
Note : I've already repair the disk by using disk utilities, but it doesn't help me at all.
View 5 Replies
View Related
Oct 16, 2008
I picked up a new MacBook yesterday and I noticed a weird issue when coming out of "monitor sleep" mode, not regular sleep mode.
When I move the mouse, the external monitor shows what you see in the picture, kinda like a TV with no signal. The MacBook screen works fine so what I just do is unplug and re-plug in the DVI plug and everything is good again.
My 24 inch Dell monitor worked fine with my M1330 and other computers so I know it's not that. Does anyone have the same issue or maybe give me some light on this?
View 24 Replies
View Related
Jun 27, 2009
I have a 22" Dell external monitor on my MBP. I know that I just close the cover to my MBP to shut off the screen. What do I do in those instances that I want to use both screens? There has to be something simpler than restarting the MBP?
View 3 Replies
View Related
Aug 5, 2009
As said, my current set up is an HDMI - DVI cable (HDMI to monitor and DVI to adapter) and my DVI - mini DisplayPort adapter, everything is connected fine but when I turn on the monitor, it says cable not found... and nothing is displayed on the screen but on the Macbook side of things, it sees the monitor is connected (I can extend the screen and leave the screen) but other than that, it appears I cannot get an image on the monitor, pressing every button on the monitor does not work either.
Any other information that may seem necessary, let me know. I tried clearing my PRAM and clearing the power and such but nothing seems to work.
View 1 Replies
View Related
Nov 5, 2007
I have used the disk for a number of years - all appeared to work fine - I am now backing up my data and only get Very slow transfer speed using firewire 800 - 2 hrs to transfer 1.36 Gb. Disk is connected to a Dual 1.8 Ghz Power PC G5 with firewire 800 - another d2 disk is connected to it with firewire 400 and I have just connected a Maxtor disk using firewire 400 to that. I have tried Updated the firmware (it did require it), tested the device alone on both 800 and 400 connections both slow. Restarted everything and used disk repair to check and repair the disks - repaired permissions on the startup disk.
Connected all the devices together again | LaCie 800 - LaCie 400 - and Maxtor 400. It sends data to all the other devices fast (~ 3 min for 1.6 Gb) through the LaCie 800 disk connection!, but does not send data to the LaCie 800 fast at all. Tested the other devices alone as well - they are all fast. Have also performed a TechTool Pro Ver 4 test on the the disk (Disk type ST325082 3A 232.89 Gb LaCie d2 External LUN0 revision 3.03) Passed the surface scan, disk controller and read write tests. Is the disk failing?
Information:
G5 Tower
Mac OS X (10.4.10)
View 9 Replies
View Related
Jan 9, 2010
I have a 27" i7. I have a 24" DVI Montior hooked up to it via MDP->DVI adaptor. When the 24" Monitor is on, everything is fine. When I turn the monitor off, the magic mouse tracking on the 27" screen stutters. I am not kidding - it took me ages to figure out that to fix I either need to turn the other monitor on OR disconnect the MDP->DVI adaptor.
View 2 Replies
View Related
Jan 31, 2010
I have a G4 powerbook with an LCD that only displays the top 25% of the screen. I've been using an external monitor with it just fine. Today, I reinstalled the OS and ran into a problem. The main OSX startup menu (you know, where it asks for your location, timezone, personal info, etc) is prompting me for information, and I can't see the forms to fill them in! The external monitor defaults to "extended" as opposed to "mirrored", and the forms are embedded, meaning I can't drag them over to my external monitor. Obviously, if I can't fill out these forms and get to the desktop, the laptop is completely useless.
Does anyone know how to force the external monitor to be "mirrored" from startup? Is there a keycommand?
View 1 Replies
View Related
Jul 30, 2005
I have been using the latest macbook pro 13.3" since April 2010. Over the last week the monitor suddenly goes completely white and the external monitor goes black. The laptop becomes unresponsive although the programmes opened continue running (e.g a skype voice call would continue without interruption although the monitor is all white).
The only solution at the moment is to press the turn off button for a few seconds then switch the laptop on again. It will then work normally until for no apparent reason this happens again.
View 1 Replies
View Related
Nov 9, 2008
Is there a way to use my external monitor as my only monitor when connected to my mbp? Or, can i clone my display, but at separate resolutions? I am able to do this on windows with nvidia software, is there software that allows further customization?
View 3 Replies
View Related
Dec 12, 2009
I've hooked up my Macbook Pro 2009 to my external monitor and everything works. The issue is the mac image on the external monitor is cut off like I can't see the white top bar. Any solutions to fix this issue?
View 1 Replies
View Related
Dec 1, 2010
I have my MacBook Air hooked up to a 46" HDTV so that I can play games on the big screen.
Problem is, I notice a slight lag with the mouse when looking around in the game on the big screen.
When I look at the game from my MacBook Air there is no lag with the mouse.
I heard theres a mode called "clamshell" that would fix this but don't know where to find it or enable it.
Info on fixing the lag from the big screen so that games could be playable when watching from the big screen.
View 2 Replies
View Related
Sep 28, 2007
is it possible to use the screen of a macbook pro as an external monitor for a different device?specifically, I have a mythtv system at home that I want to bring to school, and was wondering if i could get the monitor of the macbook to display the mythtv system (preferably via the VGA connector).
View 15 Replies
View Related
Jun 1, 2009
I have a 2.0 white macbook but am thinking of upgrading to a unibody. How do I connect to an (either model) external monitor and can the MB be closed and still be "on". Someone I know told me they had a docking station for their Dell but I'm not really looking to buy more equipment. So I'm looking for suggestions on how to do this.
View 6 Replies
View Related
Oct 7, 2009
Looking into getting an External Monitor for my 15 Inch MBP for the best price.
View 11 Replies
View Related
Apr 26, 2010
I'm currently waiting on my new MBP to arrive and was wondering...is it possible to use my old MBP as an external monitor?
View 1 Replies
View Related
Feb 1, 2012
I got a fairly nifty AOC 16" USB monitor from TigerDirect.it isn't totally Apple-Quality, but its bright... looks decent at 1366x768... and I got the color of the windows to almost completely match. I would suggest the AOC USB monitor to anyone looking for a cheap way to get a 2 monitor setup. And, it runs from a USB port only... no need to plug it in. Very nice. One drawback of this model is that it does have protrait AND landscape modes... there is a stand on the rear that you twist and can stand the monitor up on its end. However, the Mac drivers don't support this feature! Shucks! I had grandure thoughts of having a document in portrait mode all tall and beautiful. OR, a killer long Facebook window. But alas, this feature will have to wait for now... man, if AOC can release a new driver with this feature; I would say this $140 monitor is a KILLER. Still reccommend it.
First, when I connected it the monitor was aligned or setup on the left hand side... I want the NEW 16" monitor to be on the right hand side just as an extra screen space... so, I opened displays and moved the alignment. I noticed you can go up down left or right... which is cool. So I set it up for the right hand side, so when I scroll off the MBP screen to the right the cursor just goes over to the new screen. Great. However, the dock and toolbar are on the NEW 16" monitor no matter what I do! I want the dock and toolbar on the MBP still; and the new monitor just sitting there ready for me to throw any STUFF on it. How do I do that?
Also, when I use that multiple desktop feature... lol, I forget what its called. Each desktop switches the new 16" monitor to whatever # of screen I'm on. I can live with that if its the only way. BUT, better for me would be if the MBP has the dock and toolbar... can switch between those different screen #s... AND, the new 16" just sits to the right as extra space. So when I switch screen #s, the new 16" stays the same with whatever windows I have open staying there... this might not be doable, and that would be OK... but wondering if theres a way to do that too...
View 1 Replies
View Related
Feb 2, 2012
how do i set up an external monitor for my macbook air? I want to be able to view different content on the external monitor, than what is on my mac screen.
Info:
MacBook Air
View 2 Replies
View Related
Apr 16, 2012
Is it possible to use a brand new mac book air as an external monitor?
Info:MacBook Air
View 1 Replies
View Related
Jun 17, 2012
How to use the external monitor with the lid of the macbook air shut? Each time I close the lid of my macbook air the external monitor also goes off.
Info:
MacBook Air, Mac OS X (10.7.4)
View 2 Replies
View Related
Feb 27, 2009
I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point. Any help would be greatly appreciated.
View 2 Replies
View Related
Sep 18, 2010
I'm running an older 24 inch cinema display on my MBP and am looking to add second 24 inch monitor for use in FCP. My only cheap option seems to be a USB gizmo, something like this [URL]. Anyone have any experience with this device, specifically with FCP 6; I'd like to use the second monitor to playback the footage in the viewer so I don't think the device needs too much horse power but the footage will be in the ProRes 422 format.
View 3 Replies
View Related
Sep 25, 2010
I have an early 2010 13 inch macbook hooked up to an AG neovo F-417 monitor. Now i can get it to connect in both mirror and clamshell mode, but it seems to black out on me every few seconds ranging from 20 to sometimes a few minutes, switching back to the macbook screen.
I have basically tried to use every possible screen resolution but the blackouts won't go away.
is it possible that it is an incompatibility issue?
View 2 Replies
View Related
Dec 7, 2010
I recently bought a Macbook, and I've been trying to connect it to my external Samsung SyncMaster P2270 screen using a DVI-to-miniDVI adapter from Apple. It works, both as extended or mirrored screen, but the maximum resolution I get is 1600x1200 (and I actually use 1600x900, cause it looks distorted otherwise).
Any clues on how to get it to output 1920x1080? I'm sure that the screen supports that resolution, because I've used it before with another laptop.
View 4 Replies
View Related
Feb 5, 2009
Just bought a new 22' LG monitor and I have the Mini DisplayPort to VGA. When I connect my monitor to my MacBook all is OK until I try to chose the 1680x1050 which is the LG's prefered resolution. When I chose it, my monitor turns to black, then after a while it shows the picture for a second, then black again.. Is this a 9400m fault, or the VGA adapter fault?If I try a MiniDisplay port to DVI, will it work in 1680 x 1050?
All the other resolutions are shown ok..
View 5 Replies
View Related
Mar 16, 2009
Just bought a new monitor and hooked it up to my MBA. Screen saver looks fine but the page is displayed off screen far left and the cursor is not visible at all. Works fine with my Powerbook so I don't think it's a monitor problem. Are there settings which could be wrong?
View 4 Replies
View Related
