I just switched to IMac and use to use Pinnacle for home video editing. If IMovie allows you to take a frame from a clip and export it to iPhoto as a jpg for printing and sharing?
Info:
MacBook Pro, iOS 5.0.1
I take loads of videos of my friends and I snowboarding, wakeboarding, and other stupid stuff. As well as making short films with the footage I like taking snapshots/freeze frames out of the videos to post on facebook and make slideshows. On my old Windows computer with the Kodak MediaImpressions software, although that program *****, I could take good snapshots out of the videos and it saves them as normal photos. But I can't figure out how to do that with iPhoto or iMovie. I know how to do a freeze frame in a project movie on iMovie but that is just in the project and doesnt save the photo.
Info:
MacBook
Pro, Mac OS X (10.7.4)
So i've recently gotten in the uploading to YouTube craze with my Flip Mino HD but i'm not too happy at the way i've been doing this and am hoping there is an easier way.
As of late i've been importing what i film into iMovie. In iMovie i'll edit the video to my liking. In iMovie i'll "export" to the media browser so it'll show up in GarageBand. Then i'll open GarageBand and edit my film further, dealing with sound; adding music. After that i'll export it as a .MOV to my desktop. Then i'll open iMovie again and import that .MOV file and from there in iMovie will have it upload to YouTube in its original HD format.
I own a Sony Cyber-shot camera, and a 24 inch IMAC computer. I took a short video clip and downloaded it to Iphoto (no problem doing that). I then downloaded the clip to a 4 gpb flash drive, as an mp4 video. My problem is that my friends Microsoft based PC can't play it.
View 1 Replies View RelatedI’ve got the locked edit in FCPX. 90+ min, 8000 clips.Timeline is set at 23.98, clips on the timeline are some 23.98, but mostly the BMCC 24p. No prob for FCPX. It plays with whatever you throw at it. The problem comes in when I’m trying to export OUT, because the other programs don’t like it. Like I’ve got to get my audio post engineer this AAF for ProTools out with X2Pro. X2Pro doesn’t support this "retiming" that FCPX does and spits out warnings for non-conformance. What to do? Change all the clips to 23.98 or change all the clips to 24p, or is there some other better/easier way to get that audio (with syncing video) out to ProTools?
Info:
Final Cut Pro X, OS X Mavericks (10.9.4), 3.5Ghz intel Quad-core i7, 16 GB RM
Trying to trim clips in Quicktime 10, they are quicktime movies and when I try to export it says it cannot the media may be damaged. How do you save a trimmed clip?
Info:Mac OS X (10.7.3)
I was just finishing up a video, and I noticed a slight mistake in my voicing during my recording of the video. I wanted to remove it, and it was small, but there's no hope. It just deletes the whole clip, making me undo it, and making me clueless.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.2)
I have taken everything out of the trash and then returned items in small groups for successful emptying. That identified the problem which seems to be one iMovie 08 clip that causes the Secure Empty Trash to freeze. The progress bar shows that it contains 3 items which drops to 2 almost instantly. Then it freezes and just stays there (45 minutes or longer) until I select Force Quit. Clicking on the Stop Emptying Trash has no effect whatever.
Info:
MacBook Pro, Mac OS X (10.7.3)
I've been trying to to export my Audio from FCPX 10.1.3 as Separate Files (per Roles) from a Multicam clip but it stops and freezes after exporting the first Audio track listed in the export setting. Example:
I have a Multicam clip with 3 Audio Roles (Bob, John and Marc, all assigned to their Audio Roles).When i export Audio as Roles (separate files), i then select all the Roles i want to export: Marc + John + Bob. It will export up to 35% or so and freeze.Then i look in the Finder location of the export to see the audio of Marc only.
If i put John + Marc + Bob, i will see the Audio for John only and so on.If (i have to at this point) i cancel the export, the audio file gets deleted and i get nothing out of FCP. Is there a way to export Audio as Separate Roles file from a Multicam clip or do i need to add all the Audio clip separately from the Multicam on the Timeline?
I'm adding the audio in the Multicam clip so that, if i want to remove a chunk of video from the timeline, The audio attached to it will also be removed and everything stays sync'ed after the cut i made.Â
I tried Detaching the Audio from the Main Timeline. I then get the Audio but still in a "multi cam" bundle. When i select that and look in the Inspector, i see all the Roles but i can't Export like i want to.Â
Info:
OS X Mavericks (10.9.4), Final Cut Pro X (10.1.3)
I'm not too technically savvy when it comes to computers. I do amateur video editing with Final Cut Pro. I purchased a Mac Mini (2.0ghz, 1GB RAM, base model) and it's taking forever to render my 1.8gb clip. I think total render time with some music is about 1.5 hours as opposed to my old computer (a 2.4ghz penryn mbp, 2gb ram) which would do it in maybe 10 minutes I'd assume. My question to you all is, is my unit defective? Will upping the ram increase the clock speed or am I way in over my head purchasing this unit?
View 16 Replies View RelatedI'm a newbie coming over from MS for 12 years. Last week I recorded a short clip in iMovie...how neat is that
Tonight I recorded one again and now there is no sound when I played it back. I know I've fiddled with things in system preferences so maybe I set something that has now affected the sound in iMovie
I've checked all the obvious volume controls, they're all up and on.
How do I speed up a clip with iMovie '08. After reading I found that this can be done in iMovie '06 but I can't find any documentation for achieving this in iMovie '08.
View 3 Replies View RelatedRight now I'm trying to make an anime music video for my younger brother. I've taken some of the clips from my dvds and i've imported them already. Also I've divided the clips into certain parts. I want to edit the duration of each clip but I don't know how. I'm using iMovie HD by the way since I have a iBook G4
View 1 Replies View RelatedAfter importing HD video (from a Canon Vixia HV40) into iMovie 11 (v 9.04) at 960x540 resolution, you get a bunch of .mov files. Does anyone know why those .mov files, as they come out of the import process,will not import into iTunes? Here are the details. My brother wanted to put a small one onto his iPad. I told him the simplest way (or so I thought) to do it would be to import the .mov file into iTunes (v 10.6.1) and then sync his iPad. There was no need to make a project from the single clip, then share it. However, iTunes will not import any of the .mov files made with the iMovie import. Does anyone know why? This happens on my iMac (core i7) and his (core i5). Of course, if I open the .mov file in QuickTime Player (v 10.1) then export to a .m4v file (export setting "iPad, iPhone & Apple TV"), the new file imports into iTunes just fine. In case iTunes thinks you shouldn't be importing clips from the iMovie events folder, I dragged the clip to the desktop and tried the import, but that did not work either. I guess what this comes down to is given that iMovie, QuickTime Player and iTunes all come from Apple, why can iMovie and QuickTime Player read the file while iTunes cannot? I would think the same code would be in all three products (do the iMovie and QuickTime Player developers refuse to share, while the iTunes developers are lazy?).
Info:
iMac i7, Mac OS X (10.7.2)
Im looking to make a trailer with some video footage on you tube. Is there any way I can take this off you tube and edit it with imovie.Â
View 3 Replies View Related-Downloaded a movie from a torrent site (Dont shoot me, I rented it like 6 times)...
-After download was complete, i opened it up...
-it was an .mp4 file and it played in Quicktime and I could see it AND hear it, everythings' fine...
-I drag the file into iMovie HD...
-After the clip (or movie) was imported I played it and it doesn't show video, i can only hear it.
ive been wondering what it could be, i upgraded to quicktime pro to try and convert it to .mov and still, same thing happened...
I took a video on my iPhone 4, uploaded it to my computer, and imported it into iMovie so I can edit the sound. At a few points throughout the one minute clip, my voice is overbearingly loud since I'm holding the phone nearest to me... and I'd like to adjust the sound (I guess simply decrease the volume?) at these few points where my voice overpowers the rest of the video... so as to make it less awkward for myself, really... before I share the video with any of my friends and family. How would I go about this to just edit the volumes of a few short segments?
View 3 Replies View RelatedI have a project I'm working on from a birthday party. What I'm trying to do is take a 5 second audio clip from a piece of video (a bunch of 3 year olds screaming happy birthday) and use it as audio over a still image to start the video. I detached the audio that I want to use, highlighted it and copied it. I can't figure out how to use it elsewhere. Maybe it's not possible to do this in iMovie 09?
View 4 Replies View RelatedI'm importing 720p HD video from my new digicam, a Panasonic DMC-ZS3. After importing the video into iMovie, the speed of replay is way too fast (2-3x normal speed). I think it may have something to do with the fact that I'm downloading 720p and somehow the progressive scan is confusing iMovie: [URL]
View 1 Replies View RelatedI'm trying to make my first movie (and subsequently first DVD) from iMovie.
I'm using iMovie 8 and iDVD 7.0.4.
I've downloaded some Mp4 clips from YouTube and imported them into iMovie via "File -> Import Movies". The clips are in the right order and play fine in iMovie.
When, however, I attempt to export the newly created movie, nothing happens. I click on "Share", but all subsequent options are greyed out. Nothing is selectable.
I've tried a number of things and read through everything I can find in the PDF included with the software (plus some Google searching), but can't get past this problem.
When I imported the clips I went with the default settings presented. Did I perhaps go wrong there?
The clips I've selected to work with are the higher definition Mp4 clips in this series:
[URL]
I'm trying to protect my personal photos that I put in my blogs on my website. Can I easily do this with the export feature in iPhoto?
Info:
iPhoto '11, OS X Mavericks (10.9.3), I think it's iPhoto 9.5.1
I recorded bunch of video with iPhone 3GS and then edited a 12min quicktime movie from the clips. Problem is that the file size became HUGE, 1,24GB! How can it become so large file? Even one of the raw clips was 15min and 399MB. I just wanted to export the movie (with quicktime) to my Mac with the same quality as the iPhone recording quality. Here's the quicktime export settings details that I exported the movie:
-Compression type: H.264
-Frame Rate: Current
-Key Frames: All
-Compressor quality: Best
-Encoding: Best quality
-Data rate: Automatic
Filter: None
Size
-Dimensions: Current 640 x 480
Sound
-Format: Linear PCM
-Channels: Stereo (L R)
-Rate: 48.000kHz
-Render settings: Best
-Sample size: 16-bit
-Little Endian
I have an iMovie project. I want to export it or do something to get it into iTunes. I know you could share it to iTunes but I don't want it to end up in movies. I want it in music.I don't know if I need it as a mp3 but I want it in iTunes as a video.
View 1 Replies View RelatedWhen i press "send a project to Final cut" in iMovie nothing happens.
The process bar is completed but Final cut doesn't start. I have the 30 days test version of final cut - does that matter?Â
When I import video from my Creative's Vado HD Pocket Video camcorder on a month old MacBook Pro the video files in each event are black. They have no image. When I click on them I can see the video but I would prefer to see an image which makes identifying each video much easier.
Is there anything I can do so that I can see an image?
I'm having a problem with iMovie 09. When I export a movie, the video will "zoom" which I don't want to have happen. Here's two pics of what's going on.
View 1 Replies View RelatedI can't export a certain project to QuickTime in iMovie, but I can export it to other formats. The iMovie error message is: The movie could not be exported because an error occurred. (Error = -5000)
What's strange is that I was exporting this project to QuickTime yesterday, made some changes and tried to export again, and no luck? Yet it'll export to mv4 etc. I repaired permissions etc, and still no luck. I'm assuming it's related to permissions, but I have no idea where to start.
I have a Sony HDR-HC&. When I download the movie to IMovie speed of horses looks normal (as in the same as real life) I then edit the imported video and export the final version. When I play that video the horses look like they have been speeded up. I need to be able to have them moving at the same speed as when the movie was recorded. Anyone know what is happening and how I prevent the tempo from increasing by exporting the movie so other people can see it? This does not happen if I export to full version however that version is useless for sending to other people and will not even fit on a DVD to send in the mail.
View 1 Replies View RelatedI have lots of DV cassettes I want to load and eventually get to DVD.
In iMovie I have taken the first cassette and did my montage the way I want it. Now, I want to export this movie (as a single file if possible) so that when I will have a few of them, I will use iDVD to do DVD menus and add all my movies.
I have a 38 minute iMovie 09 video that I exported to iDVD. It stutters about a minute in to the movie. I have done the following:
1. exported a shorter version (1:48) into iDVD. The same thing happened.
2. exported this shorter version into quick time. Worked just fine. Don't know how to make a DVD that I can watch on a player from this though.
3. tried to export this shorter version to youtube. It said that "youtube reported an error"
