A client asked me to remove a word from a title (I'm using the Lens Flare title). I removed the word, let it render, and playing back in FCPX, sure enough the word is not there - but when I export it using Share > 720p, the word is back! Three times I've exported the project and each time the word is still there.
FCPX 10.1.3 , OS10.9.4, MacPro 2x2.4GHz Quad
In my video in final cut pro ten the any title text I add disappears. It shows up in the timeline but there is nothing on the canvas screen?
View 6 Replies View RelatedI am creating complex titles in FCE using the lower-third feature. How do I save these settings to use the exact same ones later? I don't want to start over and may not remember exactly what they were. They need to match through the video. It seems that I have done this before but can't remember and of course nothing in the documentation.
Info:
iMac (24-inch Early 2009), OS X Mountain Lion (10.8.5)
Have been trying to get in a special character [the tick mark] onto a text title on my current project. Had gone to the special character option under EDIT menu, and added the desired special character to the 'favourite' list, but after that I do not know how to move ahead.
Info:
iMac, OS X Mavericks (10.9), garage band, FCPX:10.0.9 version
All of the sudden, I find out that I can no longer put text on my video, because my title templates are gone, along with all my generators. How to get back my title templates and text without deleting and reloading my FCPx?
View 1 Replies View RelatedI'm having some difficulty adding a dissolve transition to a title that is connected to a clip in the primary storyline. I've tried leaving it as a connected clip, I've tried putting it in a secondary storyline, I've tried using both the dissolve transition and ramping the opacity, but no matter what I do or how long I make the dissolve, it only seems to last about 5 frames.I'm coming to FCPX as a veteran of FCP studio, and this was something I did quite regularly and quite easily. I'm using the most recent version of FCPX.
View 1 Replies View RelatedMy normal workflow is to shoot HDV 1080i60 and import via a Sony HD-700 clamshell via firewire into FCP 6.0.6 working with a sequence set to HDV 1080i60. Depending on my next steps, I'll either export straight from here, do a QT conversion, or transfer the sequence to a Pro Res sequence and export from there. I'll often send a compressed (H.264) file to the client via yousendit. Never has there been a problem with the workflow or the client opening the file on a PC...
Now the other day, for the first time I had to work off of my portable set-up....FCE off a macbook pro and an external 7200 rpm hard drive. I imported with the only available choice (apple intermediate codec) and went about my edit. I exported and sent the file....While the file was fine on my laptop the PC user could only HEAR the QT file but got no picture. I was able to burn a DVD and move the operation to my desktop.
But after countless attempts at troubleshooting, including printing to tape and reimporting, recapturing all the original footage from tape, using my standard sequence settings, etc. I still can only export a QT file that is unable to be properly viewed by PC users.
Information:
Mac Pro (2006), FCP 6.0.6, iWeb 09
Mac OS X (10.5.8)
How do we make an MXF export with Final Cut Pro X ? Since 2014/09/01 is it no more possible with Hamburg Pro Media...
Info:
Mac Pro
I was working on a project and trying to export my project.I tried to to export by using 'Export Media', Share>Media Browser, Share>Apple device and nothing works and comes up with an error dialogue like below. I'm using iMac late 2012 with Mavericks.
View 5 Replies View Relatedexport codec that can give me .mov files that can be used in any quicktime player (mac or pc). Currently exporting to h.264, but it is taking ages...
Second question:
Having troubles too, getting the camera to record in native FCP .mov's. Despite setting to .mov mode in the camera's file format option, it still seems to pump out xdcam ex files...What I want is to record straight sony xdcam files, is there some setting in the camera I am missing?
Information:
G5 DP 2.7
Mac OS X (10.4.5)
LaCie 120G, 40G iPod,
When i press "send a project to Final cut" in iMovie nothing happens.
The process bar is completed but Final cut doesn't start. I have the 30 days test version of final cut - does that matter?
Final Cut 10.0 won't let me export.
Instead I get a message that says 'The operation couldn't be completed (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
I recently started using the Final Cut Pro X and i want to know how to export the file in the format that will be accepted by youtube as if it is exported with default settings youtube says to upload faster use the given formats.
Info:
iMac (Retina 5K, 27-inch, Late 2014), OS X Yosemite (10.10.1)
I click on File> Share> Master File, Nothing Happens, Not even an error message. I have tried restarting the application.Also the project seems to render when I click (Render All) but the orange bar does not disappear. I am running FCP 10.1.3 on a Macbook Pro mid 2012
Info:
Final Cut Pro X, OS X Mavericks (10.9.4)
I have having ongoing trouble with green frames in the export. I have read it could be a rendering problem, however i do not see it when playback in the time line, ONLY when after I complete the edit.
Info:
OS X Mavericks (10.9.2)
I made a movie on FCPX 10.1 and exported it to iTunes. A few days later I try to play it from iTunes and it doesn't work. The original project in FCP is now missing.
I also shared my video with some friends but it doesn't play on thier macs either.
Info:
Final Cut Pro X
Just updated to Mavericks. Everything worked fine before then.
So I finished my project , go to export, and no response. When I try and export to vimeo or you tube I get this error -
"The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"
Its not a camera import issue. I actually made another project with clips that I know to have exported, with no problem. And again, there is no response when I export project.
And I can't uninstall fcpx because I have clips saved to the program. And hard drive is dead.
Info:
Final Cut Pro X, OS X Mavericks (10.9.4)
I have been having an issue exporting my project from FCP X, in which it fails at 75%. I have tried different types of experts from exporting to an apple device to master file and have plenty of space on the Hard Drive/Export destination. I am using a 21.5 inch 2013 iMac. I am connected to a Mac Mini server on a network as well. The video is only like 2:30 long.
Info:
MacBook Pro, OS X Mavericks (10.9), 2011 Module
I'm trying to use the app store to do the update on Final Cut Pro. We have a slow connection at home so I leave it downloading overnight, but when I get up in the morning it says theirs an error in the pkg. Is there anyway I can download the update directly (e.g. on my faster work connection) and then take that file home to do the update?
Info:
Final Cut Pro X, Mac OS X (10.6.8)
Final cut express is stopping exporting at 100% and hanging there for an indefinite amount of time. What is going on? I am using simple Quicktime Exporting options.
View 1 Replies View RelatedI'm a drummer and use a few different camera's to record my drumming. I have one camera capable of recording 720p or 1080p, but my other 2 only shoot 480p. I want export the whole video after editing in all the different shots, at 1080p or 720p. My problem is, the camera's that shoot 480p, have a border around them, so can I fill in that border somehow?
Info:
MacBook Pro, OS X Yosemite (10.10.1), 2.2ghz i7 quad-core
I am new to FCP (I also have Motion and Compressor). My computer is new (specifics below in the error message). I have been trying to upload a 10 minute video to YouTube for 2 days without success. FCP drops a lot and last night I tried to compress the video via Compressor and received the message I did not have the YouTube ID or password (after it spent 30 minutes compressing). ?
I have had luck exporting to YouTube before from FCP so it isn't a password problem per se. Granted, those videos were ony 2 minutes long. I do not have a lot of graphics within the video.. it is just long. I shot the video with a Rebel T5i HD 1920x1080 24p. I accidentally changed the settings from 23.98 to 24p prior to uploading this video footage and am unsure whether or not that has affected the upload.
Regardless, I will not do that in the future as I believe I should have left it as 23.98. I also created a 7 second introduction via Motion and imported it into the movie. Would it be better to upload to YouTube on my own? Outside of FCP? I was thinking exporting via Compressor might work, but no luck.
Process: Final Cut Pro [27080]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: Final Cut Pro
Version: 10.1.1 (240682)
App Item ID: 424389933
[Code] .....
why I can't export my FCP 6 sequence using Compressor 3.0.5.
I have an hour-long 1080p Pro Res 422 sequence that I am trying to export using Compressor 3. Whether I export using the 'Pro Res 422' preset or the 'H.264' preset, transcoding commences but then stops abruptly 15 to 20 minutes later with an error message saying 'Quicktime Error: -50.'
For what it's worth, I have an early-2008 dual quad-core Mac Pro desktop with 6 GB of RAM and two ATI Radeon 5770 graphics cards. I am currently running OS X 10.6.8. The media (including Motion graphics) and project file are on an external drive connected via Firewire 800.
how to properly export this sequence at the highest quality without getting the error message
Info:
Mac Pro, Mac OS X (10.6.8), Final Cut Pro 6
export from fcp 7 to compressor 3.5 took over 30 hrs. sequence was 95 min. 1920x1080 60i pro res 422. i did use the sharpen filter on the entire sequence. export was using the youtube setting (h.264) w/ same source size. i'm using a 2x2.8 ghz quad core intel xeon mac pro w/10 gb ram 4 x1tb hard drives. source files are on external fw 800 drive and i export internally to my hard drive. 30 hrs is ridiculous. i also tried first exporting sequence as a prores 422 same setting file. that took 20 hrs and then exporting that using the youtube setting which took another 15 hrs for a total of 35 hrs. what can i do to speed this up?
View 1 Replies View RelatedI have one of the fastest macs available at the moment with full RAM and this new update is crippling my machine. I first dealt with the audio plug ins issue - then deleted those - now I have full functionality BUT - an incredibly slow export time on a 7 minute timeline. This thing should be zippy. I think this update is not so great.
Info:
Mac Pro (Late 2013), OS X Mavericks (10.9.1), 6 Core
I have been trying to get my movies to play on windows computers but they won't accept the format. how do i export mpeg4 from final cut pro
View 1 Replies View RelatedI have a strange thing happening when I attempt to update a Final Cut Project and Event from FCPX 10.9. I'm choosing to update manually. When I tell FCPX to go ahead and update, everything looks like it is happening as planned - except that inside of Final Cut the Project files are no where to be found. I know Final Cut is supposed to put them into an Event created especially for the old Projects. But when I look for it there are no project files. When I look at what actually took place at the finder level I find that all the Events have been moved just fine but the old Project Folder is left alone and still intact. 
Info:
Final Cut Pro X, OS X Mavericks (10.9.5)
I have a bunch of projects created pre the FCPX 10.1 update (ie created prior to June 2013) that when I try to update so that I can access the project in 10.1 , FCPX refuses to relink to the original media files. It says that the files are recognised, but are incompatible as they do not share the same media range.
The media files are stored on external drives (and were always stored this way), the folder structure hasn't changed since the projects were originally created. The only thing that has changed is the old project has been converted to a new 10.1 project.
I have noticed that the info tab of the new project lists all the missing media as having a media range beginning at 00:00:00:00. However, if I reimport the original files into the library, the media range never starts at 00:00:00:00. It will start at a different time code, often with the first number corresponding to the hour of the day the footage was shot (so something shot at 11am will read 11:00:00:00).
Both original media, and missing media, share the exact same duration, audio channels etc, just the timecode form Media Start/End is different.
I am wondering whether:
1) In converting the old project, has FCPX reset all the media start codes to begin at 00:00:00:00? And can it be fixed?
2) Has FCPX has changed the way it recognises time codes with the 10.1 release, so that my original media is being imported correctly, but differently to when the original project was created?
3) If there are any situations where the media start/end timecode of my original media could have changed? Say in upgrading to Mavericks?
Either way, almost every single project I have completed with FCPX prior to June 2013, is now unlinked, and cannot be relinked due to the fact that the project has one idea of the media start range, and FCPX has another.
I have tried deleting the alias files in the library file, replacing them with the original files. That has no impact.
I'm currently operating on FCPX 10.1.3, working on OSX 10.9.4
Info:
MacBook Pro (Retina, Mid 2012), OS X Mavericks (10.9.4), FCPX 10.1.3
I've been working on some making some video clips that are ipod commericals (to eventually do the whole thing on imovie) but after 4-5 videos being finished, I work on the next one and right in the middle of rendering, it just freezes and doesn't do anything else, or when I try to just export it it does that, but before it works fine. I tried removing a couple extra effects I aded, and it still does it.
View 2 Replies View RelatedI have just finished editing a video that I made and when I go to click to Export literally nothing happens and when I try to share to youtube an error message pops up. This isn't my first time as I have exported videos before.
View 6 Replies View Related