Desktops :: Hard Drive Not Totally Seen?
Dec 5, 2009My G4 disk utility will only see 128mb of a 500mb in OS 10.2.8.
Anyone know the fix for this?
My G4 disk utility will only see 128mb of a 500mb in OS 10.2.8.
Anyone know the fix for this?
I have a G5 dual 2.5 mhz and want to upgrade the hard drives. Is there a limit to the size drive I can install, or my system will recognize? I'm looking at 2 x 1TB.
View 4 Replies View RelatedWhen I plug in my 250gb Wester Digital external hard drive into my mac, it just makes some starting up noise, and clicks and then does it again, and again,... never appearing on my desktop or in my finder. My mac is an Ibook from 2002. I need to back up my data on an external drive to move to my new PC computer (it was free.)Is the drive bad? Or am I not doing something correctly? There's no user manual.
View 9 Replies View RelatedIt is a B&W G3 Desktop rev 1 350 mhz 1GB with 6GB Quantum startup volume with 9.2.2, and an aCard, Maxtor 120GB that is going to have Tiger on it.
Two OSs on Two Hard Drives and one OS on each hard drive on one apple desktop.
The hard drive is connected and the Apple System Profiler on 9.2.2 6GB startup volume detects the aCard and the Hard Drive, but when I select which hard drive to install, there is the original hard drive, and nothing else.
How do I install 10.4 on the Maxtor Hard Drive? Is there a key combination that I have to hold down while it is starting up?
My son is having a BIG problem with his Mac Mini. His Mini has a 1.83GHz Intel Core 2 Duo processor, memory of 3GB 667 MHz DDR2 SDRAM and runs Mac OS X Version 10.6.3. He has Time Machine and also a 1.5TB desktop hard drive. From time to time, he has been getting pop-up warnings that his internal hard drive was about to become full. He would then do some deleting and things would be fine until the next pop-up. Last week, after watching some videos on Utube, he tried to open iTunes and, instead of a pop-up, got an error message with some numbers (which he didn't write down). It began the usual routine, starting with a white screen with the apple logo in the center and the loading circle spinning right below it. After that, it normally goes to a light blue screen and then loads the desktop, but this time (and ever since) it stopped at the blue screen, empty except for the message "Hard Drive Full, Please Delete Data".
Apparently the screensaver still works, but not much else -- like the Finder. He said that he did get something to appear on the top bar by taking the batteries out of his Apple Bluetooth keyboard, bringing up the "Bluetooth Setup Assistant", but once a wired keyboard is plugged in, everything on the top bar disappears (since the Mac sees a keyboard). He was going to do a "restore" and, in preparation, thought he had done a successful back-up to his external hard drive using the Time Machine feature. However, when he checked the Time Machine under System Preferences it said that the external HD had nearly 1.5 TB unused (only a couple hundred pictures or so on it) and the Time Machine was supposed to put about 70GB on there. So now he is concerned that he didn't/can't do a back-up.
Without warning my iMac [OS X Snow Leopard] popped up an alert saying that I should eject a drive before disconnecting it. I had done nothing to generate this error message. I clicked ok to close it and noticed my 4 month old, external 8T Mercury Elite-AL Pro Qx2 was no longer visible in my drive directory. I also noticed this external unit was making a looped grinding noise as if it was trying to write without success. I figured one of the drives failed and took it to the mac doctor. Other than a few directory errors, everything appeared to be fine, so I paid the service fee, brought it home and plugged it in only to find the same prob - obviously it's something with my iMac. Before I go spending more service fees, I wondered if anyone here could point me toward a method of discovering what might be wrong. I ran disk utility [verify and permissions] and fixed some directory errors, but don't know how to look further. iMac was home networked with a PC [Windows] and a laptop [Windows]. I did notice something wacky with the PC, but its very old and I expect it to die any day. I was running the network through the PC, so I direct connected the iMac to the router and modem but no change: still cannot see the external drives. What other info do you need to make an educated guess for me?
View 1 Replies View RelatedI use Time Machine for backing up my iMac hard drive I am into photography and have a large number of photo files that take up a lot of space. The originals I burn to a DVD but the pictures I put on an external hard drive 1 tb so they are readily accessible. Is there any way I can use Time Machine to automatically back up this hard drive onto another external along with my iMac hard drive, or do I need to store the files in duplicate manually on 2 different external hard drives?
View 4 Replies View RelatedI was trying to replace my internal hard drives and the 'Data Cable' seemed seriosuly hard to free, it seems I have tugged it too hard and broke the piece of plastic off surrounding the data connection on the hard drive, now all there is 7 copper(?) looking pins exposed.I can no longer seem to connect the Data Cable back to the hard drive.
View 2 Replies View RelatedI have a-
Model Name:Power Mac G5 Quad
Model Identifier:PowerMac11,2
Processor Name:PowerPC G5 (1.1)
Processor Speed:2.5 GHz
Number Of CPUs:4
L2 Cache (per CPU):1 MB
Memory:16 GB
Bus Speed:1.25 GHz
Boot ROM Version:5.2.7f1
Hardware UUID:00000000-0000-1000-8000-00145165E21A
It hung tonight while trying to burn a CD using Toast 9, which I could not even Force Quit. I closed it down using the Power button but when I rebooted it wont play, burn or recognise any media in the CD/DVD Drive! I have had the original replaced a year ago. Has it died or is it a more complicated software or OSX problem? I am running Mac OS X 10.5.8 (9L30) Kernel Version:Darwin 9.8.0 on my Mac. The DVD drive has been making some strange whirring noises occasionally as I ripped CDs to my hard drive.
I own an iMac G5 with Mac OS 10.5.8 I need to find a way for my VST floppy drive to work for me to be able to access some images I have on floppy disks.
View 2 Replies View RelatedIs it possible to disconnect the optical superdrive from my iBook G4 (which is dead but the superdrive still works) and install it in my iMac G5? (Superdrive here is dead)
View 3 Replies View RelatedMy old Mac, G4 tower running 10.4.11 died. I need to recover data from the hard drive. I put the drive in a disk drive enclosure via USB but my new Mac, Mac Pro Intel, 10.4.11 cannot read the drive. I get an error message, "this drive is not readable by this computer, eject, initialize". It sees the USB drive in disk utility but cannot see the data.
View 7 Replies View RelatedI'm trying to copy my DVDs. I would like to find the best solution for copying the disk from my internal optical drive to an external optical drive.
View 1 Replies View RelatedI'm using a desktop IMac 15" and have come up against a problem I can't solve. I selected the disk drive as the start-up drive. Put the wrong disk in the drive and it is unable to start the comp. Now I have a blank screen and cannot eject the disk.
This is the first MAC I've ever had that does not have manual ejection for the disk drive.
What can I do short of ripping the cases apart?
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.Â
Info:
iMac (27-inch Mid 2011), iOS 5.1.1
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies View RelatedI have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
I know this is going to be an incredibly easy fix, but I can't find it. The Hard Drive on my new iMac is not appearing on my desktop, nor is it appearing in the "Device" menu in Finder.
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies View RelatedI have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Info:
iMac
i have installed some app in my macbook and then after whole i deleted but it still in some where in my hard because i still have some of them option in my hard?
i tried to delete them from macintosh/library /applicationSupport
i find them there and then deleted them and restart the system
but all folder that i had deleted were there again and those option of app are still left in hard?
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies View RelatedRecently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies View RelatedMacbook Pro 17" Early 2011Â
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
I'm running an iMac (one of the all-white, 1.83 GHz C2D machines, with 512MB RAM) and i've noticed in recent months it's become outrageously slow, i have no idea why but it's just horrendous.
I'd really like to start afresh with a clean install of Leopard, but only if it will make a difference. Currently i'm finding that even with 2 apps open (eg Mail and Safari) there is serious lag now and again, and sometimes things lock up completely. Is this just a bloated OSX install or signs the computer is dying?
Anyway, i have a 180GB backup drive currently used for Time Machine, but if i reinstall then restore from that drive, won't it just restore all the bloat?
I'm currently working out a plan to use my old Macbook as an AppleTV equivalent- I've found out about atv4mac and it sounds ideal. However, the laptop will spend the whole time running with the lid closed, is there any way to totally turn off the monitor? I can turn the brightness down all the way, but it's still on, seems like a bit of a waste!
View 3 Replies View RelatedI hesitate and I went for the MBP I5 2,4 with 7200 HDD (because of the 100 euros ecology bonus and the education reduction) but now I obviously hear my HDD (wich is like a little fan noise by the way) and I checked from store the 5400 is very silent. I assume it s normal because the noise isn't high but i m really sensitive to it. do you all hear your 7200 HDD ? are the 5400 TOTALLY silent ?
View 9 Replies View Related