Desktops :: Power Mac G5 Quad Can't See Or Play CD / DVD Drive
Sep 16, 2009
I have a-
Model Name:Power Mac G5 Quad
Model Identifier:PowerMac11,2
Processor Name:PowerPC G5 (1.1)
Processor Speed:2.5 GHz
Number Of CPUs:4
L2 Cache (per CPU):1 MB
Memory:16 GB
Bus Speed:1.25 GHz
Boot ROM Version:5.2.7f1
Hardware UUID:00000000-0000-1000-8000-00145165E21A
It hung tonight while trying to burn a CD using Toast 9, which I could not even Force Quit. I closed it down using the Power button but when I rebooted it wont play, burn or recognise any media in the CD/DVD Drive! I have had the original replaced a year ago. Has it died or is it a more complicated software or OSX problem? I am running Mac OS X 10.5.8 (9L30) Kernel Version:Darwin 9.8.0 on my Mac. The DVD drive has been making some strange whirring noises occasionally as I ripped CDs to my hard drive.
View 3 Replies
ADVERTISEMENT
Jan 16, 2011
The machine is in a very cold area, was on for about 10 to 15 minutes before it just shutdown (like the plug was pulled) I checked the powercord by using another , same problem. I try to push the power button but nothing happens.
View 6 Replies
View Related
Feb 2, 2012
Whilst servicing my LCS I had the misfortune to break the outlet pipe fom processor A's heat transfer block. (For anyone attempting to remove the factory fit tubes DO NOT try pulling them off-cut them above the barbed pipe with snips and then carefully cut them lengthwise with a craft knife and peel them back). I first tried repairing it with super glue to no avail and then tried araldite rapid which formed a strong bond. I was concerned that any bending moment would break the join so to minimise this I cut a 3mm length of the new clear PVC tube, slid it down to the base of the pipe and liberally coated in more araldite. To further reduce bending I moved it to processor B's slot as the pipe for that is more upright. I filled the system with a 50/50 mix of antifreeze and distilled water. I then spent hours bleeding the system without much success.
Info:
PowerMac, Mac OS X (10.4.11), G5 Quad
View 7 Replies
View Related
Nov 6, 2009
I have a Mac Pro 08, 2x2.8GHz Quadcore, 2gb RAM. I never buy IMac because I want a power machine. So I always buy Macpro but! now IMac comes quad, nice monitor etc. My question is if new IMac is more power that my machine? The new IMac is more power even I buy more ram? 32gb? vs the 16gb of new IMac?
View 24 Replies
View Related
Feb 23, 2012
What type of processor does the Power MAC G5 Quad have?
Info:
PowerMac, Mac OS X (10.5.8), Number of CPU's-4 / Bus Speed-1.25G
View 14 Replies
View Related
Mar 5, 2012
I inherited a PowerPC G5 Quad Processor (2005?) with 2 video cards and PowerPC G5 dual processor. The hard drives have no OS on them so I'm investigating which OS will run on them. I would really like to put Lion on them, but I'll use whatever will work.
Info:
PowerMac
View 3 Replies
View Related
Mar 14, 2012
this morning my PM G5 quad won't start, also with 10.4 dvd install disk.When start lo load from DVD I've this Kernel Panic.
Info:
PowerMac, Mac OS X (10.4.11)
View 14 Replies
View Related
Feb 2, 2010
my G4 will not power up anymore, and I have tried replacing the battery, the pushing the PRAM switch, etc. any other suggestions?
View 1 Replies
View Related
Mar 25, 2012
I am trying to test the coolant pumps on my g5 because one cpu is overheating and there are no coolant leaks, there are 2 Delphi pumps each with 4 wires, they are connected to a black 12 way plug. I am wondering if I can connect a 12v supply to the pumps to check that they function OK..
Info:
Mac Pro, G5 Quad
View 2 Replies
View Related
Jun 24, 2012
what is the normal operating temperature for a power mac g5 quad model
Info:
PowerMac, Mac OS X (10.5.8)
View 1 Replies
View Related
Oct 4, 2009
I have a G5 dual processor ((I think its a 2.5) running Tiger. I had it stored for several months and when I brought it out it won't start.. No response at all to pushing button..
Cord is good as it will power my display.
View 1 Replies
View Related
Dec 1, 2009
Several months ago.... came home and mini was powered off and would not turn back on. I have replaced the unit but would like to try to revive the old one if possible.
I have replaced the ram with its original dimms. Still no good. I have also removed both the dvd and hard drive. Would be happy if i could atleast get the white light and mac sound... but nothing
View 6 Replies
View Related
Apr 21, 2010
I have a used G4 from a university surplus materials auction. The cpu had been purged of all programs and operating system. I attempted to install Tiger but installation stops at designating drive location.
View 1 Replies
View Related
Dec 6, 2010
Where to get power supply for - imac os x /model # M6498 EMC NO 1991 100-240V
View 3 Replies
View Related
Mar 5, 2009
My power mac G4 wont power on No lights no noise No nuttin! The battery voltage is 3.71 Ive disconnected everything and no luck Tried the PMU? reset no luck
View 6 Replies
View Related
Apr 1, 2008
is it even possible to upgrade an old dual core powermac g5 to a quad core or even an 8 core.
I have a dual core one and i really need to upgrade to a quad or even 8 but it is so expensive to buy a whole brand new one and i was wondering if there was a way to just get a new processor and more ram or what not.
View 12 Replies
View Related
Jun 14, 2006
I've been having problems with the optical drive on my G5 Quad for the last few months. It makes a clanking noise every few minutes, similar to the sound it makes when you put in a cd. Also, every now and then when I put in a cd it just doesn't read it, and it makes itunes crash. The drive is an LG HL-DT-ST DVD-RW GWA-4165B. I have read lots of bad things about this drive on the internet, and it also happens to be much slower at importing dvds than the pioneer drives that are (or were) also shipping with some G5s.
I finally went down to my apple store, in The Netherlands. I explained the problem to the tech guy, and he said they would replace it under warranty. However, when I asked if it was possible to get a pioneer drive, he said they had no control over which brand they receive on replacement parts, but that almost always they get pioneers. Well, I took it in and they replaced the drive. They refused to do a test on it though, arguing that they were fixing another G5 and wouldn't be able to hear the noises I was complaining about (there was also a strange noise coming form one of the fans). The guy suggested that I brought it back some other time, and said he was absolutely sure he wouldn't find anything (turns out these guys also happen to be clairvoyants, or so they seem to think!) Coming from America I find it really hard to believe how rude and stupid the apple people can be at this store in The Hague, but unfortunately I can't avoid having to deal with them while I live here (there are endless horror stories about this particular shop). I don't have a car, so I had to take a cab there and back, which ran to about � 20, plus all the trouble and the wasted time. But sure, why not just bring it again some other time like the guy said?............
View 6 Replies
View Related
Aug 12, 2010
I noticed that this hasnt been asked on any thread as everyone is too busy debating on 3.2GHz vs. the 3.3GHz 6 core models.
View 4 Replies
View Related
Sep 18, 2008
I have a G5 dual 2.5 mhz and want to upgrade the hard drives. Is there a limit to the size drive I can install, or my system will recognize? I'm looking at 2 x 1TB.
View 4 Replies
View Related
Nov 8, 2008
When I plug in my 250gb Wester Digital external hard drive into my mac, it just makes some starting up noise, and clicks and then does it again, and again,... never appearing on my desktop or in my finder. My mac is an Ibook from 2002. I need to back up my data on an external drive to move to my new PC computer (it was free.)Is the drive bad? Or am I not doing something correctly? There's no user manual.
View 9 Replies
View Related
Dec 5, 2009
My G4 disk utility will only see 128mb of a 500mb in OS 10.2.8.
Anyone know the fix for this?
View 3 Replies
View Related
Apr 15, 2009
It is a B&W G3 Desktop rev 1 350 mhz 1GB with 6GB Quantum startup volume with 9.2.2, and an aCard, Maxtor 120GB that is going to have Tiger on it.
Two OSs on Two Hard Drives and one OS on each hard drive on one apple desktop.
The hard drive is connected and the Apple System Profiler on 9.2.2 6GB startup volume detects the aCard and the Hard Drive, but when I select which hard drive to install, there is the original hard drive, and nothing else.
How do I install 10.4 on the Maxtor Hard Drive? Is there a key combination that I have to hold down while it is starting up?
View 3 Replies
View Related
Nov 18, 2009
I own an iMac G5 with Mac OS 10.5.8 I need to find a way for my VST floppy drive to work for me to be able to access some images I have on floppy disks.
View 2 Replies
View Related
Jul 2, 2010
My son is having a BIG problem with his Mac Mini. His Mini has a 1.83GHz Intel Core 2 Duo processor, memory of 3GB 667 MHz DDR2 SDRAM and runs Mac OS X Version 10.6.3. He has Time Machine and also a 1.5TB desktop hard drive. From time to time, he has been getting pop-up warnings that his internal hard drive was about to become full. He would then do some deleting and things would be fine until the next pop-up. Last week, after watching some videos on Utube, he tried to open iTunes and, instead of a pop-up, got an error message with some numbers (which he didn't write down). It began the usual routine, starting with a white screen with the apple logo in the center and the loading circle spinning right below it. After that, it normally goes to a light blue screen and then loads the desktop, but this time (and ever since) it stopped at the blue screen, empty except for the message "Hard Drive Full, Please Delete Data".
Apparently the screensaver still works, but not much else -- like the Finder. He said that he did get something to appear on the top bar by taking the batteries out of his Apple Bluetooth keyboard, bringing up the "Bluetooth Setup Assistant", but once a wired keyboard is plugged in, everything on the top bar disappears (since the Mac sees a keyboard). He was going to do a "restore" and, in preparation, thought he had done a successful back-up to his external hard drive using the Time Machine feature. However, when he checked the Time Machine under System Preferences it said that the external HD had nearly 1.5 TB unused (only a couple hundred pictures or so on it) and the Time Machine was supposed to put about 70GB on there. So now he is concerned that he didn't/can't do a back-up.
View 4 Replies
View Related
Sep 2, 2010
Is it possible to disconnect the optical superdrive from my iBook G4 (which is dead but the superdrive still works) and install it in my iMac G5? (Superdrive here is dead)
View 3 Replies
View Related
Dec 12, 2009
My old Mac, G4 tower running 10.4.11 died. I need to recover data from the hard drive. I put the drive in a disk drive enclosure via USB but my new Mac, Mac Pro Intel, 10.4.11 cannot read the drive. I get an error message, "this drive is not readable by this computer, eject, initialize". It sees the USB drive in disk utility but cannot see the data.
View 7 Replies
View Related
Jan 20, 2010
Without warning my iMac [OS X Snow Leopard] popped up an alert saying that I should eject a drive before disconnecting it. I had done nothing to generate this error message. I clicked ok to close it and noticed my 4 month old, external 8T Mercury Elite-AL Pro Qx2 was no longer visible in my drive directory. I also noticed this external unit was making a looped grinding noise as if it was trying to write without success. I figured one of the drives failed and took it to the mac doctor. Other than a few directory errors, everything appeared to be fine, so I paid the service fee, brought it home and plugged it in only to find the same prob - obviously it's something with my iMac. Before I go spending more service fees, I wondered if anyone here could point me toward a method of discovering what might be wrong. I ran disk utility [verify and permissions] and fixed some directory errors, but don't know how to look further. iMac was home networked with a PC [Windows] and a laptop [Windows]. I did notice something wacky with the PC, but its very old and I expect it to die any day. I was running the network through the PC, so I direct connected the iMac to the router and modem but no change: still cannot see the external drives. What other info do you need to make an educated guess for me?
View 1 Replies
View Related
Aug 9, 2006
i have a power mac g-5 quad with an external dvd drive and a external hard drive and 2gb of ram. on my ext. hard drive i downloaded mac the ripper and that is where i put all my dvds, now today on my pmac i was using mac the ripper, popcorn, itunes, safari all at once and it froze up on me?why? could the ram be an issue? how may programs can i use at once with my pmac?
View 3 Replies
View Related
Oct 27, 2009
I use Time Machine for backing up my iMac hard drive I am into photography and have a large number of photo files that take up a lot of space. The originals I burn to a DVD but the pictures I put on an external hard drive 1 tb so they are readily accessible. Is there any way I can use Time Machine to automatically back up this hard drive onto another external along with my iMac hard drive, or do I need to store the files in duplicate manually on 2 different external hard drives?
View 4 Replies
View Related
Jan 5, 2010
I'm trying to copy my DVDs. I would like to find the best solution for copying the disk from my internal optical drive to an external optical drive.
View 1 Replies
View Related
