I got my Mac Mini from my moms friend (for free) so I don't have the disks that came with the computer, but I do have the Snow Leopard upgrade disk and the disks that came with the new MacBook Pro's if that helps. How would I go about doing a clean install on my Mac Mini?
View 2 RepliesI have a summer 2005 14" iBook G4 that I'd like to wipe and give to a friend, but I seem to have lost my install disks somewhere in one of my moves in the last 5 years. The Apple Store employee I talked to said I should make an appointment at the Genius Bar and they'll do a wipe and reinstall for me, but I'm not interested in putting much more money into this since I'm giving it to a friend as a favor (hers just died). Any suggestions for how to get a copy of the right OS and all the iLife software, too? It has Tiger, but I could put Leopard on it, if that's easier to get a hold of.
View 3 Replies View RelatedI have a 20" Intel based iMac (model A1224) running Snow Leopard. It is just over a year old and only had the original Apple keyboard and mouse plugged into it. Today when I tried to start it I got only a blank gray screen. I tried all the keyboard combo start-up suggestions in the Apple help screens, unplugging/replugging everything, and booting with the Original disk and the Snow Leopard disk. A couple of those attempts produced a minute of the gray apple logo screen, then back to blank. While the disks were in it did sound like it was trying to read them, but spit out the disks after about 5 minutes.
View 7 Replies View Relatedi just bought a macbook pro and i want to do a clean install but it didn't come with the install disks. is there a way to do it without buying new disks?
View 24 Replies View Relatedi have a macbook pro 13" from around august 2010. i'm happily running 10.6.8 on it but i need to do my anual clean install.
however, i've lost my original install disc. is there a way around this? is there a way i can order a replacement?Â
i have a retail bought snow leopard dvd but this wont work as it's older than the machine.Â
I have a Macbook Pro Intel Core Duo (first generation of MacBook Pro released). I run OSX 10.6.5. My disk utility has detected a problem and says I need the install disks that came with the computer. Called apple and they said I could reboot from snow leopard or the upgrade.** Problem is that I don't have any disks with me except those that came with my brand new iMac. Can I use those to reinstall the system? Is there any other way?
**They also said that after 2007, the install disks that come with computers are keyed to that specific computer so I "might" not be able to use the disk to repair.
Additionally, and I don't know if this makes a difference but I have the airport/time capsule which backs up my computer for easy restore.
I have a Mac mini running OSX 10.4.11 that I purchased second-hand. It did not come with the original install discs. I want to give it to my grandson now that I have a new i-Mac, but cannot figure out how to remove myself from the Admin position and substitute him.Â
View 1 Replies View RelatedWhats the best way to do a clean install on my mac mini?
I have basically sold it and looking at erasing my stuff on it, so therefore when the new person starts it, it takes them through all the welcome pages etc.
I am running snow leopard btw.
I just got a Mac Mini with Snow Leopard. The guy I bought it from took out the 80GB HDD that was in it and put my old MacBook 160GB HDD in it so it's like my old laptop on a mini. I want to start over with the system fresh and new as it'll be serving a new, re: family computer, purpose now. I don't have the SL upgrade/install disc right now and not sure if/when I'll get them back. Is there a way to wipe it back to new and keep it on snow leopard? This HDD was initially a Leopard drive when I first purchased it FYI.
Info:
Mac mini, Mac OS X (10.6.8)
I'm in a pretty big mess right now. I was using boot camp with lion and Windows 7 no problem and I wanted to edit the sizes of the partions. It didnt go so well and I ended up losing both operating systems. Now the big problem is when I boot up from the recovery partion I cannot do any sort of formating from the disk utility, it always give me some sort of error. When I try to install lion via web there is no partion that I can Install it to. I can install Windows no problem from a USB drive whcih I have done already. When managing the disk in windows I see 2 of the windows partions, the mac recovery partion, and an 80 GB partition that I can format but I cannot do anything else with. I dont have any images or recovery devices other than the recovery partition.how to get the drive back to mac format so I can re install lion.
Info:
Mac mini, Mac OS X (10.7.3)
My computer HD failed and I cant start my macbook at all. The computer boots and shows a question mark on a folder and the HD clicks so I assume thats the problem. I'm getting ready to order a new one and I can't find my original install disks. Can I do a fresh install of the OS on a new HD with just the Leopard install disk? I have a set of Mac Pro install disks, but don't know if they will work (missing divers?).
View 6 Replies View RelatedI just purchased a used MacBook 5.2 with Apple care until Aug 2012. The previous owner doesn't however have any of the original installation disks but he does include a backup copy of Snow Leopard. Do I need the original installation disks or will the backup copy of snow Leopard suffice? *I don't know the difference between a backup version and original* And if I need them what are they and where do I get them?
View 3 Replies View RelatedI have an iMac g4 I have Adobe CS3 on it, and I want to transfer the applications to the new macbook pro I will be getting soon. Unfortunitely I "misplaced" the original disks so all I have is what is currently on my computer.
Is there any way to do this? I have an external hard drive and thought maybe I could some how get the apps on there and then put them on the macbook, but I don't know if that is realistic.
I must have deleted textedit - can't seem to find it. and I have no clue where my original disc that came with my iMac is. I am running 10.5.8 btw.
View 5 Replies View RelatedI was given this macbook by my boyfriend and wanted to erase all his data and stuff. I have the mac boxed set for snow leopard for this macbook but I am not sure where to begin, how to start from scratch.
Info:
MacBook, Mac OS X (10.6.8)
Purchased a used macbook aluminum did not come with disks but i have the discs of my mac mini 2010 aluminum.I tried erasing and installing but it did not work.It says i cannot mac osx on this computer.
View 2 Replies View RelatedThis is the first time i reinstalled(clean install) my snow leopard on my MBP. All went fine but then i inserted the disc for bundled application (which contains the ilife apps) but it keeps failing.Â
It says that "the installation failed. the installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance".Â
I've also done my research on this matter. I've gone thru a few steps i tried as below without success:Â
1)normal install - fail
2)repair permission - fail
3)install in safe mode - fail
4) install using another admin acc - fail
5) made an image out of the disc and install - fail
6) used a similar disc(my dad's since we have identical version) - fai
7)updated my system and install - fail
8) reinstall the mac - failÂ
i cant think of any other solution as im a bit noob when it comes to mac. is there any other things i could try before taking it Apple?
Info:
MacBook Pro, Mac OS X (10.6.8)
The internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
Each time I put in the installation disk for Office Mac 2008, my Macbook tries to read it, but will eject it within 15 seconds without allowing me to download. Is something wrong with my DVD drive? My Macbook is less than 1 year old. Not getting this at all!!
View 4 Replies View RelatedI purchased my MacBook in August 2006 and it came with 10.4.X and I have been fine with using that OS. However, just recently (august 08) my sister purchased another Macbook. Her Macbook came with the 10.5.4 install disks. I tried to put these into my macbook just to see if for some reason apple was nice enough to allow people who purchased new macbooks to update all other macbooks they owned. However, it does not appear to work that way. Is there any way I can get the 10.5.4 Install disks to work on my macbook (purchased august 06) that is currently running 10.4.11?
View 3 Replies View RelatedI recently purchased a new Mac Pro which came with iLife 09.My MBA came with iLife 08.I'd like to do a clean reinstall on my MBA and add the 09 apps.
First, what's on what DVD? Is the OS on one DVD and all the bundled apps on the other or is there a mix of apps on both DVD's?One potential snag is that I recall reading somewhere that the MP install of OSX includes optimizations/support for Nehalem... would this screw up my MBA or would it ignore that stuff?
Is there any way to upgrade my DVD player to read HD DVDs?
View 3 Replies View RelatedI did a software update for Safari to 5.1.5. I rebooted the system as required. Now neither the firewire external drive, nor the USB external drive are mounted.Â
They both spin and click several times and then stop. The disk utility does not see them. Power cycling the disks does not help.
Info:
Mac mini, Mac OS X (10.6.8), core 2 Duo
My 2009 mac-mini started acting up about 2 months ago.The symptoms were:
-- slow response
-- freezing for no apparent reason the going again
-- failure to shutdown forcing use of the power button
-- long boot times
-- finder would freeze and could not be relaunched
-- iTunes would not quit
-- trying to view files on external drives may take an excessive time
I tried "everything" to try to resolve the problem.None of this worked:
-- zapped the parameter ram
-- cleared disk permissions
-- repaired disks
-- booted to safe mode
-- ran fsck
-- reinstalled Snow Leopard
There were several articles that discussed how to "reliably restart the finder". urls....Although none of the suggestions in the article or in the discussion provided any relief, I was finally convinced that I needed to disconnect all of my external drives and reboot.It appears that we have finally discovered the culprit.I have 4 external drives:
-Seagate GoFlex 3TB USB
-Seagate GoFlex 2TB USB
-Seagate 1.5TB Firewire
Toshiba 0.5TB USB (Used for Carbon Copy Clone of the internal drive)Booting from this drive did not change the problem.With all of them removed my computer worked just fine.Adding back the 3TB USB and the 1.5TB Firewire, I still have a working system.Since discovery of this error, I've found several articles complaining that this bug has been around long enough that it should have been fixed by now.Apparently Apple points fingers at the disk drive maker and the drive makers point back at Apple.Refering back to the article above, (the HTTP link), these same symptoms seem to appear because of some rogue applications.It -may- be that because I am using Crashplan 3.2.1 to backup this "broken" disk to another locally attached disk, that Crashplan is the "rogue" application.However, I've been using Crashplan for nearly 3 years and have found it to be a great app -- much more reliable than Time Machine (which proved to be nearly worthless when my MacBook Pro running Snow Leopard died and was replaced with a MacBook Pro running Lion.
Info:
Mac mini, Mac OS X (10.6.8), core 2 Duo
I purchased the new Mac Box Set with Leopard 10.5.6, iLife '09 and iWork '09.
I was 50/50 on which type of Leopard install I wanted to perform today.
Looks like the disc made the choice for me and performed, what I'm assuming, is the upgrade. All of my files, settings, etc. were intact after the reboot.
I have the Win 7 RTM currently installed on my Mac Pro, on a dedicated internal hard drive. I'm running VMware 2.0. I have the retail version of Win 7 arriving today. Anyone know if I can just install through Windows, i.e., while running my existing Win 7 installation via VMware, or do I have to go through the whole clean install via Bootcamp routine?
View 7 Replies View RelatedJust heard that Mac's Install disks are machine specific. Is that really the case? If so, why? Coming from the PC world, I'm used to just putting the OS disk in the CD/DVD drive and take it from there. So, if I want to install a Mac OS on my machine not only do I have to obtain the OS, I also have to get the proper Install CD�s/DVD's or what? Please clear up the fog Mac experts.
View 20 Replies View Relatedmy brother got a new macbook and im running a powerbook g4 still on tiger can i use his os install discs to upgrade to leopard? or will it wipe my computer clean and install it on a clean slate?
View 3 Replies View RelatedI'm trying to reinstall Mac OS X on my MBP using the original install disks. OS X was replaced by Ubuntu and now I'm trying to replace Ubuntu with OS X. When I insert the OS X CDs and try to boot from them, either by holding down the 'C' key or the option key and choosing the Mac OS X CD, the CD simply ejects, and then the computer proceeds to boot from the HD and into Ubuntu.
View 3 Replies View RelatedMy current MBP I bought new earlier in the year so has both software disks etc. Now, I bought an IMac second hand this week and I find the install disks are missing. I have bought a new copy of snow leopard but I am wondering if theres a way of installing just the iLife apps from the MBP disks onto my IMac?
View 7 Replies View Related