Windows On Mac :: Bootcamp Backup Via Disk Utility - Restore With Or Without Deleting Partition?
Jun 23, 2009
I would like to "Back-up", "Clone" or create an "Image" or whatever else people call it of my bootcamp installation. I know I can create an "Image" of bootcamp via disk utility but how would I restore it?
Would I first delete the bootcamp partition and then re-create a bootcamp partition and then restore? Or would I just restore? Will the end result be what I am expecting, i.e., my Win 7 install right back to the perfect state of when I created the image?
Right now, let's say my Windows 7 install got smoked one day for whatever reason (it is windows...) and I needed to re-install. Me personally, I would just go into Bootcamp Assistant, delete the Windows partition then create a new one and then get installing. Unfortunately installing and updating takes hours and that is what I am trying to avoid.
I am planning to upgrade my Windows 7 32 bit bootcamp partition to Windows 7 64 bit. I know I have to do a clean install to do this, so I am planning to wipe my Windows partition and start from scratch. I am trying to figure out how to remove my bootcamp partition though. If I use the bootcamp assistant, it seems like it will only give me 231gb of space back for Mac OSX. I have a 250gb HD, so where is the extra space going since my Windows partition is 42gb? Can I just delete it with Disk Utility to recover the space back? Could I possibly screw this up by using Disk Utility?
I just restore my Mac OS to a single partition and then I tried re-partitioning but it's giving me an error. I've tried several times, tried using different sizes every time. My HD's capacity is 250GB, and I've got 108.95GB free. So I am sure that making a new partition of 35 - 40 GB is not a big deal. I also tried using Disk Utility, both from the Mac OS install disc and while using the Mac OS itself, but it keeps giving me this error. I do not want to format my Macintosh HD's partition because I don't have an external HDD on me at the moment so I will not be able to back up. I have a lot of important data that can not be deleted.
I'm trying to use Disk Utility to restore a .dmg backup file stored on an external usb hard drive. The image is a read-only dmg and is 75gb. When I try to restore the 75gb image to a 128gb SSD formatted in OS Extended (Journaled), Disk Utility says that there is not enough space on disk to restore.
First some background info. I recently purchased a 1TB hard drive for my 13" MBP, and I am about to do a clean install of OSX 10.6 and Win7 64bit on separate partitions.
And I want to setup the partitions before I install using Disk Utility. The reason for this is because I'm under the assumption that when creating a NTFS partition its better for the disk to be blank so it can put the MFT(Master file table) and MFT Mirror wherever it wants instead of some random spot on the disk (that way disk writes will be faster). The MFT thing was true when converting a FAT32 disk to NTFS. Nativity formatted NTFS disks were always faster then ones converted from FAT32, because the MFT was spread out instead of at the start of the disk.
I'm worried that installing OSX and then using the bootcamp utility will cause the MFT on my NTFS partition to end up in a un-optimal place and disk Reads/Writes will be slower.
Ok, so here's my questions.
1.) Should I be using a GUID Partition Table or Master Boot Record(Remember OSX 10.6 and Win7)?
2.) Should I use Disk Utility to Create a the OSX partition and then leave the second partition as Free Space? / Or should I use a third party utility and make the OSX partition and the NTFS partition at the same time?
3.) If I do create the partitions Manualy, will bootcamp still work correctly?
4.) Should I Use Journaled or Case-Sensitive Journaled on my OSX partition?
I know all of the questions were stupid, but there isn't any info on the web about it.
Did a fresh Bootcamp install of Windows 7 on my MBA running 10.9.4, switched back and forth a few times and now the BOOTCAMP partition doesn't show up in the left pane in Finder. I hopped into Disk Utility to see what was going on and it was there, just not mounted, so I clicked mount, was told it couldn't be mounted, and it suggested I run first aid on it. I clicked Verify, nothing useful to me, then Repair, and got quite a lot of feedback that I do not understand, and then after that it was still unmountable.
I tried to copy everything it said into a pastebin because it was very long with lots of starting and stopping and counting percents inbetween, but it was over 500kb and that's the limit for free users on pastebin, so here's a trimmed version. [URL] .... I tried booting into Windows after that, and it jumped into System Repair. Apparently, according to Windows, my Boot Manager is missing or corrupt... and since I still can't access it from the Mac side of things, I thought I'd just wipe the partition in BootCamp Utility and start over.
Except instead, I get this error: "Your disk could not be restored to a single partition.An error occurred while restoring the disk to a single partition."
Disk Utility let me wipe it but I still can't mount it, either, again suggesting I run first aid on it (this does nothing). I can't boot into the Mac's Recovery mode either. It just jumps straight to Internet Recovery. When I hold option upon boot, all three partitions show up (Mac, Recovery, Windows), but when I click the recovery one it loads for a bit and then the laptop just instantly shuts off.... Have I corrupted my internal harddrive perchance?
Got my first MacBook Pro about 2 months ago and I have been enjoying it to full effect, installing programs such as logic studio and photoshop cs5 on it. Recently, however, I decided that I would like to access some of my windows based programs when I am on the road and don't have my desktop pc with me. So I bought a fresh copy of 32-bit Windows 7 Ultimate and sat at my macbook, put the disc in and then loaded up Boot Camp. I went through the menu options, decided that I wanted a 50GB partition, leaving my Mac OS drive at 182 GB with 83GB to spare. However, when I started partitioning, after about a minute it stopped and this error message appeared: "The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.".
I tried cleaning all my temporary files and deleting some files in my downloads that were quite large and I restarted my machine. The problem persisted. Is there a solution to this problem that does not involve doing all this rubbish with a fresh install of Mac OS? I don't have any method of backup apart from a couple of 4GB flash drives..
I had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.
I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)
well i got i little proble one of my friend asked me to help him install windows on his macbook, and i did it, and time later he was looking for because his windows was mess up, he give me his mac to check it, and see if i can restore o reinstall the windows partition, but i look throuth everything i know, and first thing i noted was the partition i made for windows, it wasn't call windows or unknown, it says security copies of the time machine, the worst part of all i tried to restore the partitions with boot camp, but it didn't work at all it says that i need to format the entired driver into a single partition and then i can repartitionate, so what should i do?sould i just format the entired macbook?
I have used bootcamp to partition my disk and install windows vista onto my uMB. Now I want to partition the disk again to create a tri boot setup where I can either install ubuntu or the dev preview of snow leopard (I haven't decided yet). Can I just do this with disk utility and shrink my OS X partition in order to create a new partition or will this cause problems with the disk? I would really like to not do a fresh install of OS X because I have had to do this twice to fix disk problems relating to bootcamp.
I noticed in disc utility that under the erase tab it has the option to format a drive to fat32. If I create a windows partition using bootcamp and then go into disk utility and erase to fat32 will this allow a boot into the xp drive? My xp disc keeps restarting before it gives me the opportunity to format the drive to either a ntfs or a fat so I need a way around this?
My Computer: 2.8 GHz intel Core 2 Duo Mac, running OS X Ver. 10.5.8. I've partitioned my hard drive before, but in order to get more space on my Windows partition I have made a disk image using a program called Winclone. I also backed up important files to my external hard drive, and then used disk utility to erase and make a new partition so I could restore the Winclone disk image I made and have everything back. What I'm concerned about is I've been waiting for this new partition (65 GB) to finish being made and its taking a while. I read that if you stop the process it could damage the OS X side and you could lose all your files.
I started to run time machine about 10 minutes ago and set the destination to my external drive for backup (Its a huge drive, it can hold 650+ GB so I'm not worried about running out of space.) Do I stop Disk Utility and risk it? Do I let it run? Do I kiss my computer goodbye and pray that Time Machine backed everything up right onto my external hard drive? I don't know if Time Machine is working correctly because I started it after I began to partition my hard drive. What to do. Should I let Time Machine back everything up, the disconnect my external and end Disk Utility?
I'm wanting to create a bootable clone of my windows bootcamp partition. The idea is to copy it to an external harddrive, then onto my new internal hard drive, and be able to boot it from there. I downloaded Carbon Copy Cloner, but it wont let me clone my windows drive, just my mac one. Is there any way I can do this (preferable for free).
I can boot into bootcamp with no problems. I have been wanting to be able to open the bootcamp in Parallels. Here is the issue:
1. The partition 'disk0s3' is greyed out in Disk Utility. It is not mounted. Mounting does nothing.
2. For reference, the Windows 7 is formatted as NTFS. It is a Windows 7 64-bit install
3. Verify disk does the following: Verifying volume "disk0s3" ** /dev/disk0s3 Invalid BS_jmpBoot in boot block: efbbbf Error: This disk needs to be repaired. Click Repair Disk.
4. repairing does the following: Verify and Repair volume "disk0s3" ** /dev/disk0s3 Invalid BS_jmpBoot in boot block: efbbbf Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can"t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
I have stuff on the Windows partition that I don't want deleted. I'm really stuck on this -obviously, I can just continue to boot into bootcamp, I just would rather open it from Parallels. I'm not sure what or if I made some mistake in setting up Bootcamp, I thought I followed the directions to that. I do know I formatted the partition as NTFS during the install - as I think Windows 7 requires it. I have tried installing NTFS-3G - it is installed, but didn't do any good when trying to mount the drive.
I can't find my windows partition it just shows as Macintosh HD. Although when I go into bootcamp it shows there is still 20gb assigned to windows but I screwed it up as I tried to extend the amount of GB I allowed to windows without reinstalling it. However I don't know what to do in Disk Utility now?
Model Name:MacBook Pro Model Identifier:MacBookPro7,1 Processor Name:Intel Core 2 Duo Processor Speed:2.4 GHz Number Of Processors:1 Total Number Of Cores: 2 L2 Cache:3 MB Memory:4 GB Bus Speed:1.07 GHz Boot ROM Version:MBP71.0039.B0B SMC Version (system):1.62f6
I made my windows partition too small. I use it mainly for games and didn't fully realize the size of games these days. I decided to use a 500gb hd that regrettably is USB. I kept windows on my mac but moved steam and all the games onto the hd. Now everything is slow to load (naturally) and it just isn't a great experience. What would I need to do to backup windows onto the hd, delete my partition, make a new bigger partition, then restore onto my mac?
I would like to "Backup", "Clone" or create an "Image" or whatever else people call it of my bootcamp installation. I know I can create an "Image" of bootcamp via disk utility but how would I restore it? Would I first delete the bootcamp partition and then re-create a bootcamp partition and then restore? Or would I just restore? Will the end result be what I am expecting, i.e., my Win 7 install right back to the perfect state of when I created the image?
Right now, let's say my Windows 7 install got smoked one day for whatever reason (it is windows) and I needed to re-install. Me personally, I would just go into Bootcamp Assistant, delete the Windows partition then create a new one and then get installing. Unfortunately installing and updating takes hours and that is what I am trying to avoid.
I have a MacBook Pro from the summer of 2008 that I wish to create a backup for. I partitioned the hard drive to have both an OSX Journaled Partition for 10.5 and an NTFS partition for Windows XP Pro SP3. I wish to create a bootable backup for this computer onto an external USB drive. (e.g. if I remove the internal hard drive, except for the speed difference, I should not notice a difference). How is this done? Most copying programs don't seem to make the NTFS partition bootable, and any mix-and-matching ends up making it go kaput. (I also wish to be able to copy this backup partition back onto an internal SATA drive should the original drive die.) Also, when I press alt at the EFI screen to select boot devices, none of the partitions on my external hard drive appear, even though I made an image of my Windows partition there, which should be bootable.
I am trying to set up a windows partition using bootcamp in leopard but it tells me some files cannot be moved and it cannot create a partition. I verified and repaired permissions and tried again but still no go.
I just installed bootcamp and the drivers from the apple cd, it went smoothly. It was installed on a new 20GB partition. I use Windows XP,and OS X 10.5.7. Now,after the windows was installed, I restarted my mac, hold option and chose the OS X partition, there was the apple logo then a blue screen,and it stayed that way. Blue screen was changed by a bluish-gray screen every 25 seconds or so,but that was short and it got back to the normal blue screen. That went on for sometime and I had to hold the off button for 5 seconds to turn it off. I tried starting os x from safe mode, it took longer to start, but it still wouldn't work. I used the "Bootable Utilities" disk,and opened Disk Utility,and Disk Warrior,checked the disk,they didn't find any errors.
I have a late 2008 uMB and my friend has a late 2008 uMBP. Is it possible to use my restore disk to install the bootcamp drivers on his computer after he installs windows? Are the drivers all the same, or are they hardware specific like they are with the OSX install? Any help is appreciated,
I have an alu iMac with a 500GB HDD. There is about 200GB free. Every time I run the Bootcamp Assistant, choose a Windows partition (doesn't matter what size), it sits with the progress bar spinning for ages before it gives me the error "Disk could not be partitioned as some files cannot be moved. Please reformat the disk and try again". There is no way I can back the disk up, reformat, reinstall and re-update everything. No other apps are running when I run the Bootcamp Assistant.
I would like to install windows 7 ultimate 64 bit on my mac on a partition created with bootcamp to play many MMOs that are not compatible with mac. It 's safe or need a safety backup ?
Info: MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
I am selling my 6 months Macbook pro and I would like to delete everything very securely. I would normally do a fresh install and then use disk utility to erase all date on a 35 pass. However I do not have the installation disks. I am not the best at using a mac but could someone tell me everything I have to delete and the steps I must take before I do a 35 pass erase in disk utility? I have noticed in console that I cant delete 'Diagnostic and usage messages'. I have gone through Finder then deleted the applications and gone to application support and deleted what I have seen but is there anything I am likely to miss being a non techy guy? I don't want to leave anything at all on the mac in the slightest.
I erased my bootcamp partition this morning thinking that was the same as deleting the partition - how do I actually delete the partition and combine it with my MAC OS partition now? I can't do it thru bootcamp
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Anyone knows why my external HD (USB disk connected to Airport extreme) does not show up in disk utility? (It sits on my desktop just fine and is fully functional) I' want to erase a partition but now i don't know how.
I have run the Disk Utility verify function against my system partition. It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.I think this could be because the partition is encrypted. The utility does not offer me the chance to unlock the partition with my passphrase.How can I repair the filesystem errors on this partition?
My new 2010 hexacore Mac will have 24G memory, an OWC Extreme Pro 120G SSD (positioned in the lower optical bay) and four 2TB WD RE4 drives. I'll use my old Synology 209 NAS (two 1TB WD Green Raid 1 drives) for TM backups over 1000Mbps Ethernet. Yes, I'll need to upgrade to a larger NAS very soon. This will be my first Mac Pro (have MBPs and iMac) and will be used for web design and development (mostly Adobe CS5 products).
The SSD will be used for boot and application files. I plan to use Disk Utility to create a 1+0 Raid array for data files. For a Scratch disk, should I: 1) create a partition on the 1+0 Raid Array for Scratch 2) partition a chunk of the SSD for Scratch 3) attach a spare external 2.5" WD drive via Firewire 800 for Scratch
Based on my reading, it seems that option 1 makes the most sense but I'm not entirely sure if you can partition a 1+0 array with Disk Utility. I'm pretty sure option 3 is quite silly but wanted to toss out the idea. Lastly, are there any generic recommendations on scratch volume sizing?
