Windows On Mac :: Unable To Mount Partition - Grayed Out In Disk Utility

Dec 26, 2010

I can boot into bootcamp with no problems. I have been wanting to be able to open the bootcamp in Parallels. Here is the issue:

1. The partition 'disk0s3' is greyed out in Disk Utility. It is not mounted. Mounting does nothing.

2. For reference, the Windows 7 is formatted as NTFS. It is a Windows 7 64-bit install

3. Verify disk does the following:
Verifying volume "disk0s3" ** /dev/disk0s3
Invalid BS_jmpBoot in boot block: efbbbf
Error: This disk needs to be repaired. Click Repair Disk.

4. repairing does the following:
Verify and Repair volume "disk0s3" ** /dev/disk0s3
Invalid BS_jmpBoot in boot block: efbbbf
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can"t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

I have stuff on the Windows partition that I don't want deleted. I'm really stuck on this -obviously, I can just continue to boot into bootcamp, I just would rather open it from Parallels. I'm not sure what or if I made some mistake in setting up Bootcamp, I thought I followed the directions to that. I do know I formatted the partition as NTFS during the install - as I think Windows 7 requires it. I have tried installing NTFS-3G - it is installed, but didn't do any good when trying to mount the drive.

View 4 Replies


ADVERTISEMENT

Mac Pro :: External Hard Drive Seen In Disk Utility But Partition Won't Mount?

Sep 2, 2014

I've been running a Toshiba 1TB external drive on my Mac Pro tower and it's been working fine.  But yesterday it wouldn't mount.  I could see the drive in Disc Utility, but the partition wouldn't mount.  I brought it into work where I'm running an iMac and it mounted just fine.  Why would it stop working on one computer (where it was previously fine) yet work okay on another? And how do I get it working on the tower?

Info:
Mac Pro, iOS 7.1.2

View 1 Replies View Related

Windows On Mac :: Use Disk Utility To Create OSX Partition / Working After Manual Partition

Jan 12, 2010

First some background info. I recently purchased a 1TB hard drive for my 13" MBP, and I am about to do a clean install of OSX 10.6 and Win7 64bit on separate partitions.

And I want to setup the partitions before I install using Disk Utility. The reason for this is because I'm under the assumption that when creating a NTFS partition its better for the disk to be blank so it can put the MFT(Master file table) and MFT Mirror wherever it wants instead of some random spot on the disk (that way disk writes will be faster). The MFT thing was true when converting a FAT32 disk to NTFS. Nativity formatted NTFS disks were always faster then ones converted from FAT32, because the MFT was spread out instead of at the start of the disk.

I'm worried that installing OSX and then using the bootcamp utility will cause the MFT on my NTFS partition to end up in a un-optimal place and disk Reads/Writes will be slower.

Ok, so here's my questions.

1.) Should I be using a GUID Partition Table or Master Boot Record(Remember OSX 10.6 and Win7)?

2.) Should I use Disk Utility to Create a the OSX partition and then leave the second partition as Free Space? / Or should I use a third party utility and make the OSX partition and the NTFS partition at the same time?

3.) If I do create the partitions Manualy, will bootcamp still work correctly?

4.) Should I Use Journaled or Case-Sensitive Journaled on my OSX partition?

I know all of the questions were stupid, but there isn't any info on the web about it.

View 6 Replies View Related

Windows On Mac :: Partition Error - Back Up Disk And Use Disk Utility To Format

Oct 9, 2010

I had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.

I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)

View 8 Replies View Related

OS X :: Unable To Create The Necessary Partition In Disk Utility

Nov 19, 2009

I have a Mac Mini and on the internal drive I have Snow Leopard installed on the first partition and I'd like to install Snow Leopard Server on the same drive on another partition (I'm new to Mac, this is my only machine and my only drive, and this is only for testing purposes, so don't bother with stupid questions about why etc).

The problem I have is that I can't seem to create the necessary partition in Disk Utility. I have shrinken the Snow Leopard partition to get some free space and I've created a second partition for Server but for some reason I can't choose the options button to select GUID. The button is grayed out, see attached image.

What am I doing wrong? Or is it not possible to have two OS partitions on the same internal drive?

View 3 Replies View Related

Windows On Mac :: Will Disk Utility Format My Partition To FAT32

Feb 5, 2009

I noticed in disc utility that under the erase tab it has the option to format a drive to fat32. If I create a windows partition using bootcamp and then go into disk utility and erase to fat32 will this allow a boot into the xp drive? My xp disc keeps restarting before it gives me the opportunity to format the drive to either a ntfs or a fat so I need a way around this?

View 4 Replies View Related

Windows On Mac :: Using Disk Utility To Erase And Make New Partition

Feb 27, 2010

My Computer: 2.8 GHz intel Core 2 Duo Mac, running OS X Ver. 10.5.8. I've partitioned my hard drive before, but in order to get more space on my Windows partition I have made a disk image using a program called Winclone. I also backed up important files to my external hard drive, and then used disk utility to erase and make a new partition so I could restore the Winclone disk image I made and have everything back. What I'm concerned about is I've been waiting for this new partition (65 GB) to finish being made and its taking a while. I read that if you stop the process it could damage the OS X side and you could lose all your files.

I started to run time machine about 10 minutes ago and set the destination to my external drive for backup (Its a huge drive, it can hold 650+ GB so I'm not worried about running out of space.) Do I stop Disk Utility and risk it? Do I let it run? Do I kiss my computer goodbye and pray that Time Machine backed everything up right onto my external hard drive? I don't know if Time Machine is working correctly because I started it after I began to partition my hard drive. What to do. Should I let Time Machine back everything up, the disconnect my external and end Disk Utility?

View 11 Replies View Related

Windows On Mac :: Deleting Win7 Partition With Disk Utility

Mar 24, 2010

I am planning to upgrade my Windows 7 32 bit bootcamp partition to Windows 7 64 bit. I know I have to do a clean install to do this, so I am planning to wipe my Windows partition and start from scratch. I am trying to figure out how to remove my bootcamp partition though. If I use the bootcamp assistant, it seems like it will only give me 231gb of space back for Mac OSX. I have a 250gb HD, so where is the extra space going since my Windows partition is 42gb? Can I just delete it with Disk Utility to recover the space back? Could I possibly screw this up by using Disk Utility?

View 5 Replies View Related

OS X Leopard :: Using Disk Utility / Verify And Repair Grayed Out, Using Startup Disk

Feb 28, 2009

I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.

Information:
Mac Mini
Mac OS X (10.5.8)

View 5 Replies View Related

MacBook Pro :: Delete Old Windows Partition But It Doesn't Appear In Disk Utility

Jun 13, 2012

I can't find my windows partition it just shows as Macintosh HD. Although when I go into bootcamp it shows there is still 20gb assigned to windows but I screwed it up as I tried to extend the amount of GB I allowed to windows without reinstalling it. However I don't know what to do in Disk Utility now? 

Model Name:MacBook Pro  Model Identifier:MacBookPro7,1 Processor Name:Intel Core 2 Duo Processor Speed:2.4 GHz  Number Of Processors:1  Total Number Of Cores: 2  L2 Cache:3 MB  Memory:4 GB  Bus Speed:1.07 GHz  Boot ROM Version:MBP71.0039.B0B  SMC Version (system):1.62f6

Info:
MacBook Pro

View 14 Replies View Related

Power Mac G5 :: Verify Disk Under Disk Utility Is Grayed Out?

Jan 21, 2010

When I go into first aid in disk utility, and click on my system drive, the verify button is grayed out.
If I remembered correctly, I was able to verify my system drive before.

Information:
MacBook Pro 2.16
Mac OS X (10.4.9)

View 3 Replies View Related

Windows On Mac :: Bootcamp Backup Via Disk Utility - Restore With Or Without Deleting Partition?

Jun 23, 2009

I would like to "Back-up", "Clone" or create an "Image" or whatever else people call it of my bootcamp installation. I know I can create an "Image" of bootcamp via disk utility but how would I restore it?

Would I first delete the bootcamp partition and then re-create a bootcamp partition and then restore? Or would I just restore? Will the end result be what I am expecting, i.e., my Win 7 install right back to the perfect state of when I created the image?

Right now, let's say my Windows 7 install got smoked one day for whatever reason (it is windows...) and I needed to re-install. Me personally, I would just go into Bootcamp Assistant, delete the Windows partition then create a new one and then get installing. Unfortunately installing and updating takes hours and that is what I am trying to avoid.

View 12 Replies View Related

Windows On Mac :: Unable To Burn ISO To Dvd In Disk Utility

Nov 28, 2009

I was burning an ISO to a dvd in Disk Utility, and it gave me the message "Verification of the burn failed" So, I tried running the dvd, and I didn't get any error messages. Do you think the disk/iso/whatever is good to use?

View 5 Replies View Related

OS X :: Mount HD Without Using Disk Utility?

Jul 13, 2010

Is it possible to mount a hard drive without having to open up Disk Utility?I often unmount my different Hard Drives then remount them later on and I'm getting sick of having to always open Disk Utility.

Is it possible, though another program/utility or in Mac OS X to mount a drive within Finder (or maybe the taskbar?)

View 6 Replies View Related

Hardware :: Ext. HD Seen In Disk Utility, But, Won't Mount?

Feb 10, 2009

I have a 500GB Seagate USB HD that is about a year old. it is connected to a 2006 Macbook with a 80 GB HD. I plugged the Ext. HD into the computer and the Ext. HD started and spun and the light went on, but won't show up on the desktop where it normally shows up. When I open Disk Utility The External Hard Drive shows up and I say Verify disk and it says it is OK, I say repair disk and it says OK. I then try to mount it and it says: The Disk "Free Agent Drive" cannot be mounted.

View 1 Replies View Related

MAC :: Can't Mount Volume (FAT32) In OS 10.2.6, Despite Seeing It In Disk Utility?

Sep 16, 2008

I have to do a back up (I'm cutting in Avid) on this FAT32 volume (for interoperability it is formatted this way), but I can't mount it via the Disk Utility or the 'mount' command in Terminal (it doesn't list the device, despite seeing it in Disk Utility - the volume is greyed out).The drive is connected via Firewire 400 and 800, USB is not available (to few slots).

View 3 Replies View Related

OS X :: External HD Won't Mount, But Shows Up In Disk Utility?

Sep 12, 2009

I installed SL two days ago and my LaCie firewire external has been working fine. i put it to sleep last night, and when I woke it up today, I got the warning telling me that I had disconnected it improperly (Which I hadn't, because the computer was asleep and the drive never was turned off). This has happened before and I usually am able to shut it off then turn it on again. But this time it won't mount. It shoes up in Disk Utility and System Profiler, but not in the Finder.I have tried switching firewire ports and restarting but to no avail.

View 3 Replies View Related

Power Mac :: HDD Won't Mount And Disk Utility Cannot Repair

Feb 17, 2012

933 mhz quicksilver primary HD which has 10.5.8 installed, won't mount and disk utility cannot repair, have second HD with 10.5.8 installed, but need primary to mount to retrieve data.

View 2 Replies View Related

OS X V10.7 Lion :: Disk Utility Can't Repair Disk (1 Partition) On External Hard Drive

Apr 24, 2012

I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper! 

Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'.  And it needs to be reformatted.  It's become a read only disk.  When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question.  I also noticed that there are a lot of files with "date created" being the same date in 1969!  These files may be letters I've written or photo's I added to that partition within the last few years. 

I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure.  Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state!  Does this sound right, that I have to reformat the entire external hard drive?  And how do I get the read-only files back to their original state.

Info:
iMac, Mac OS X (10.7.3)

View 3 Replies View Related

Hardware :: New External HDD Shows Up In Disk Utility But Doesn't Mount

May 27, 2009

A new Hitachi external HDD i downloaded will open in disk utility, but wont allow me to partition to format (gives me an error) and wont let me run repair or anything else. Trying to figure this one out.

All it will let me do is erase the drive to FAT

View 10 Replies View Related

OS X :: External Disk Not Showing Up In Disk Utility - Erase Partition

Sep 7, 2009

Anyone knows why my external HD (USB disk connected to Airport extreme) does not show up in disk utility? (It sits on my desktop just fine and is fully functional) I' want to erase a partition but now i don't know how.

View 4 Replies View Related

OS X V10.7 Lion :: How To Use Disk Utility To Repair Encrypted Disk Partition

Apr 6, 2012

I have run the Disk Utility verify function against my system partition. It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.I think this could be because the partition is encrypted. The utility does not offer me the chance to unlock the partition with my passphrase.How can I repair the filesystem errors on this partition?

View 2 Replies View Related

Power Mac G5 :: Firewire Drive Seen By Disk Utility Won't Mount, Verify Or Repair?

Apr 15, 2009

I have a WD Terabyte drive that I have used for over a year with no problems. A couple of days ago my roommate went to use it and disconnected the drive from my computer without ejecting it first. He used it with his PC and disconnected it without "safely removing" it from his computer and now it will not mount to my desktop of been seen by PC. Disk Utility sees the device but I get an error when I try to repair the disk or verify the disk. It gives me an "error on exit" message. I really need the 700GB of info on that drive. Don't know what to do next.

Information:
Powerbook G4
Mac OS X (10.4.11)

View 14 Replies View Related

MacBook Air :: Disk Utility Won't Allow To Mount NTFS External Hard Drive

Aug 29, 2014

I've recently converted to the Mac-side:

I'm having difficulty with my external hard-drive, here's the info on that one: 

Disk Utility won't allow me to mount the drive, I've tried using a number of softwares to read it (working under the assumption that it's an NTFS drive), including Tuxera and Paragon. I have too much stored on the hard drive to empty it back onto my old computer, and so I'm not able order to re-format it.

Info:
MacBook Air, OS X Mavericks (10.9.4)

View 1 Replies View Related

Mac Pro :: Scratch Disk Partition And Size With Disk Utility

Sep 8, 2010

My new 2010 hexacore Mac will have 24G memory, an OWC Extreme Pro 120G SSD (positioned in the lower optical bay) and four 2TB WD RE4 drives. I'll use my old Synology 209 NAS (two 1TB WD Green Raid 1 drives) for TM backups over 1000Mbps Ethernet. Yes, I'll need to upgrade to a larger NAS very soon. This will be my first Mac Pro (have MBPs and iMac) and will be used for web design and development (mostly Adobe CS5 products).

The SSD will be used for boot and application files. I plan to use Disk Utility to create a 1+0 Raid array for data files. For a Scratch disk, should I:
1) create a partition on the 1+0 Raid Array for Scratch
2) partition a chunk of the SSD for Scratch
3) attach a spare external 2.5" WD drive via Firewire 800 for Scratch

Based on my reading, it seems that option 1 makes the most sense but I'm not entirely sure if you can partition a 1+0 array with Disk Utility. I'm pretty sure option 3 is quite silly but wanted to toss out the idea. Lastly, are there any generic recommendations on scratch volume sizing?

View 14 Replies View Related

OS X :: Disk Utility - Adding Partition Without Erasing Disk?

Nov 20, 2009

I have a 640GB external USB hard drive that I use for time machine currently. I would like to go in and add a partition to load movies to and plug it into my PS3. Can I use disk utility to create a new partition without erasing the stuff already on the disk?

And then is it possible to format a partition larger than 32GB as FAT?

View 3 Replies View Related

OS X :: Disk Utility - "Security Options" Grayed Out?

Oct 6, 2009

I am trying to 'Erase free space' using the disk utility on my macbook. I have read that you can choose to 'overwrite with zeros' via the 'Security options' tab. However, my 'security options' tab is grayed out (see pic below). Please can you tell me how I can access the 'security options' and therefore free the disk space and overwrite with zeros??

View 1 Replies View Related

OS X :: Disk Utility - How To Partition A Hdd

May 7, 2009

i want to partition my external hard drive to OS journaled so i can store files over 4 gb.

View 4 Replies View Related

OS X V10.7 Lion :: Disk Utility Partition Tool Shows That "This Partition Cannot Be Modified"?

May 6, 2012

I have a MacBook Air with solid state hard drive. The Disk Utility partition tool shows that "This partition cannot be modified". What can I do?

Info:
MacBook Air, Mac OS X (10.6.8), Total Capacity : 121.33 GB (121,332

View 13 Replies View Related

OS X :: How To Extend A Partition In Disk Utility

Dec 26, 2010

I own an iMac with a 250 GB HDD along with a Macbook that originally had a 120 GB HDD. So when I purchased my 1 TB external HDD this summer, I partitioned the external so I could back up both my iMac and Macbook via Time Machine. Seeing how small the Macbook HDD was, I allocated roughly 300 GB of my external to it, with the iMac getting the rest.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved