i've been editing a movie and in the viewer i set my in and out points and drag it down to the timeline. when i do this, final cut is adding about 10-15 frames to the end of where i set my out point. does anyone know why this is happenng and how to turn it off?
View 1 RepliesHow do i intentionally drop frames in final cut express? I tried to change it from the sequence dropdown menu but it changed the frames for the whole sequence. is there a way to drop the frames for a single clip?
View 2 Replies View RelatedI use Final Cut Pro X Version 10.1.2 under Mac OS X 10.9.4 to create a slide show video. How can I add still frames (pausing) before and after Ken Burns effect? I tried sandwich a clip with Ken Burns effect by other Ken Burns effect clips with identical starting and ending frames. However, clips are non-continuous when playing the video.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I got master which is HD 1920 x 1080 prores then convert it to 720 x 480 widescreen then compressing it to m2v. Notice pixels appear every 1 frame between 13 frames last about 15 sec on m2v. Why is that? Is there other compressor program than apple compressor. I use Compressor 3.5.3.
View 5 Replies View RelatedMy project has some green frames in it. My media has been transcoded to pro res 422 (HQ) from another codec (I don't know which one, I don't have original footage) using PAVTUBE HD converter. What's the best way to deal with this situation ? It's a 2 hour long conference and I don't feel like looking at the whole thing without blinking my eyes to find and cut all the little green frames.
Info:
Final Cut Pro X, Mac OS X (10.7.5)
I have a simple sequence where a I some actors on a green screen keyed. They are on top of another video clip that has motion with the camera (it pulls back).
I transformed the actors to be small and I animate them as the camera pulls back to show them getting smaller and movie up and to the right a bit (proper perspective for the camera move).
The camera moves eases out and then at the end, it eases in, so the animation I have is off in the beginning and in.
I checked out an online article about video animation in FCP X and I see a picture of Ease In/ Out when you right click a key frame in the timeline with Video Animation show.
When I right-click on a key frame, the only option I see is Delete Key Frame.
I have a Mac Pro, 2 x 2.66 GHZ 6-Core Intel Xeon machine with 24 GB of 1333 MHZ DDR3 memory.
I have both miniDV videotapes recorded on camcorders as well as on JVC recorder. I also have S-VHS videotapes recorded on the JVC recorder (which is a dual recorder, with the miniDV deck on the left and S-VHS deck on the right)
Whenever I try to import video from either deck (or from a Canon Elura camcorder) into FCP X, I get thousands of separate clips ranging from a few tenths of a second in length to 20 seconds or so in length. When these clips are loaded into the timeline, there is a video and audio stutter whenever the playback cursor crosses between adjacent clips, indicating that a frame or two or more has been dropped. Making a compound clip is no luck, the stuttering due to dropped frames persists. This makes it completely impossible to edit since no clip is long enough to be usable.
The dropped frames seem to be due to the program, not the cameras, tape deck or videotapes since the problem occurs across all camera platforms as well as the two videotape formats. It's as if FCP X has a hair trigger in identifying some variance in frame rates that it judges to be a dropped frame, and immediately terminates the import of that little clip and goes on to the next import, only to repeat the same process THOUSANDS OF TIMES. The problem persists whether I record imports to my SSD startup disk, to my internal RAID, or to peripheral disks.
This did not happen in previous versions of FCP using the exact same video equipment and tape formats but a different computer. There seems to be no way to tell FCP X to ignore any variation of time code and I'm concerned that this problem will render my current equipment and videotapes worthless.
I have a new Macbook Pro where I have installed FD7 (upgraded). I worked on a 105 page script on Friday, adding a few lines which increased the page count to 106. I saved it. Printed it. And Closed it. Sunday, I re-open the same file only to discover now FD7 has clocked the pages at 108. It appears that on page 10 FD7 'pushed' forward the last four lines onto the next page. Then, throughout the entire script - every so often - it would 'push' more lines into the forward page amounting to an increase in 2 pages. FD7 is glitchy, I know, often times when working in a script where I cut three pages, the total page count didn't change for a while after making the change. I did not mess with the 'tight' feature, nor were there any changes other than shortening one line. I even converted it to a pdf and emailed it to several people... now it's two pages longer, not a good thing. Or has this happened to anyone -- PC or Mac?
View 1 Replies View RelatedHow to batch add an intro, ending, and watermark to multiple videos and be able to export multiple videos using FCPX?
I can do this in Premiere Pro, but I have switched to Apple for almost everything since 2000 and hate to go back to (ack, spit, cough) anything else.
I'm trying to capture still frames from video. I found video snapshot, but am not sure if its any good. Does anyone have software suggestions?
View 1 Replies View RelatedI have about 2,000 still frames, all PNG files, that I wish to compile into a movie. They are a bit of a weird size (1049x870px) so iStopMotion doesn't work.
iMovie 8 is beyond useless for this since it downsizes them, works in a different frame rate (25fps as opposed to the 15fps that I need the final movie in), there seems to be no clear way to set the number of frames each still should last (unlike in iMovie 5), and above all, it cannot seem to import them in the correct order, and I don't have the time to manually import 2,400 files in order.
I am using FCP 6.06, I imported video from two different video camcorders: Canon GL-2 mini-dv and a Sony Digital 8 TRV340. Importing from both of these cameras went pretty well, i had some dropped frames while importing, nonetheless it went pretty well. However, when i drop any of the footage into the timeline and I press play, it will play for a few seconds, hang up (spinning wheel) and then gives me a window that says: RT extreme has determined that these were caused by slow disks, please try: Increasing the speed of your disks, Decreasing the number of RT layers, Limiting your RT bandwith. AS of now i currently use a 1 TB Western Digital "My Book" for my scratch disk. I have tried everything I can think of and I am working on a Wedding video.
View 5 Replies View RelatedMy problem is that iWeb doesn't publish my site the way it is shown in iWeb. I made some modifications to my site in iWeb (put some picture frames on my site, lines) but when I publish to a folder and then to a different domain, my site won't look nothing at all with the one I have created in iWeb. I checked my site with Firefox and Safari and the lines or the picture frames disappeared or don't appear as they should.
View 5 Replies View RelatedHow do you plot a point in grapher? For instance place a point at (2, 4).
View 3 Replies View RelatedI am running MS Office for Mac 2008 under OS X 10.6.3...
I do not get a printer dialog box when I print my slides so I do not get the chance to print speaker notes. Also, when running Word, I go directly to print bypassing the printer dialog box in Word.
I have repaired permissions, updated all my software (OS X, MS Office), rebooted.
I try to open an exported Keynote '08 document.
Here's what happens: I create a Keynote '08 document and export it as Power Point. If I either double-click or try to open from within PPT '08, I get a crash stating that PPT has encountered an error and needs to quit. This happens EVERY time with EVERY single exported presentation. Oddly, it never happened in PPT '04.
Has anyone else had this issue?
I transferred a Powerpoint 2008 presentation using a USB memory stick from my new iMac (latest OSX) to an older iMac (OSX 10.4.11) but could not open the file either by double-click or from the Powerpoint 2004 application on that computer. The file icon as transferred is a Zip file and when I double-click iI get a window saying 'Archiving file ...' but it doesn't open. Neither do I get an unzipped icon to open. I confirmed that BOMArchivehelper is enabled and exists on the computer. What am I missing?
View 4 Replies View RelatedAre there any Mac software, which controls router/access point/gateway/. I hate to use web browser to change router... settings. If there is such software, then I'm planning to buy hardware, which is compatible with it.
View 3 Replies View RelatedI always download fonts and i'm able to use them in power point or keynote.
However, today I downloaded one, it's TrueType, I can use it on keynote but not on power point
Here's what my Font Book looks
It's the on highlited and it has a dot on the right.
I already copied and pasted it on all the fonts folders on my mac.
I am new to macs, wanted the best they could offer before i became assimilated into the mac world so i waited for the new Mac Pro. Just got it and the only game i am playing is World of Warcraft. I have the 8800GT video card and 4gb of ram, the rest is as they ship it in their "standard version" of the new Mac Pro's.
I can't get over 60 frames per second with the settings maxed out. Even when i take the Multisampling to 24-Bit Color 24-bit depth 1X Multisample.
Everything is maxed out, everything. I know when i have the multisampling turned up to 4x i should be able to get over 60fps when i am like, looking at the sky or something, but i cant get it over 60fps. What do i need to do? I have read on some Blizzard forums about typing in commands like "/console GLFaster 0/1/2" but none of that is changing anything. I am running 10.5.2 of Leopard.
I have just got a new mac and I was playing around with it when I found that on the keyboard settings you can create keyboard shortcuts to applications. So I clicked add and it gave me a list of apps to choose from - the one I chose was Safari. It then says enter the menu title (no idea what that is) so I just called it Safari. Then I chose the keyboard command - command S. When I clicked off it and tried it nothing happened.
View 1 Replies View RelatedIs there any way to preview a 24fps effect in iMovie? I don't want to have to save as a quicktime @ 24fps to see how it looks.
View 4 Replies View RelatedI'm a golf instructor looking for a camcorder with a highest possible frames per second for under $500. Everything I've liked so far is not compatible with Mac's.
View 8 Replies View RelatedI'm trying to make some videos, while playing a game. I uploaded a video onto youtube and the frames are much slower then what I was experiencing. I had the frames per second on 40, but I'm not sure if that is what I should be doing. Does anyone know what I should put it on, or tell me some good compressions for it?
View 1 Replies View RelatedI work with remote equipment using web gui for management, When I try to acces them with safari I get the message "Viewing this page requires a browser capable of displaying frames". I need to be able to use safari as I have an Ipad and I get the same message. How can I do this?
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
When I rip a TV Series off a DVD then add the episodes to iTunes they go into the Movies section, is there a way I can add them to the TV show section?
View 2 Replies View RelatedI'd like to be able to have more than one song per slideshow. Is that possible in iPhoto 06? What about 08?
View 6 Replies View Relatedwhat best app is there that auto downloads ID tag information to my music lybrary? i have tried SongGenie wery good app but laks information about what year, album nr, and genre.
View 4 Replies View RelatedI have a video of a seminar presentation that I would like to add the powerpoint slides to so they are more easily seen.
View 4 Replies View RelatedI have a MacBook Pro with Leopard and the latest iTunes.
For some weird reason iTunes starts to add every file twice. And I don't mean that it just keep the original, it actually adds the file two times in the iTunes Music folder.
I just added 300 Beatles Songs but now it added every single song twice...I have 600 songs now. This happened now and then before and its REALLY annoying. Especially when I need to delete every single file manually. The show duplicates just shows both files but I still need to highlight every 2nd file and then delete it.
