IMac :: Switching To Apple 21.5" Glass Removable - Scripting Options?
Dec 15, 2009
I'm making the transition over to Apple.. I'm considering either the new 21.5" iMac or a refurbished 24". I'll be using this for photography and will need to use the built-in screen until I allocate funds for a better monitor like the NEC LCD2690WUXI2. I recently found this article http://www.fireandknowledge.org/arch...en-glare-free/ Can someone (who has tested this) confirm if this same technique will work on the new 21.5" iMac?
View 6 Replies
ADVERTISEMENT
Dec 25, 2009
I just received my new iMac and when I booted it today I had a 4 x 4 inch square condensation patch on the screen just below the webcam. It took 20 minutes to disappear. As the sun was shining through the window I also noticed marks on the screen.First of all I thought they were on the glass and so I wiped the screen with the cleaning cloth, but these are marks are under the glass. Worse of all I also have 4 stuck pixels which are down the centre of the screen. Surely this should be replaced.
View 13 Replies
View Related
Aug 11, 2010
there is a small chip behind the glass of my 27" imac. It's about the size of a small crumb or the eye of a small needle. It's hard to see, but it's definitely there. Today is my last day to get the imac replaced or repaired. I have a feeling if I bring it in that they will see there's no reason to swap out the entire imac, and if there is I would have to wait awhile because it's a custom high end one so they don't have the specsI'm worried if they swap the glass that it's just some 19 year old kid that does it and he won't be careful with the screen and will get dust, finger prints, etc. on the glass making it worse.
View 3 Replies
View Related
Nov 10, 2010
Can anyone assist me in find the promotional video that Apple did when it went to non-removable batteries? I would like to find it in a high quality format. I need it for a school presentation. I've found it on YouTube, but the quality is not that great.
View 2 Replies
View Related
Jan 20, 2010
[URL] take the time to write to Gizmodo, a major tech blog reporting [URL] You can write to them: submissions[[URL]The more people that make the issue publicly known, the more likely Apple will come out of the dark and admit to their serious quality control
View 3 Replies
View Related
Jul 1, 2008
Ever since "upgrading" to 10.5.4 yesterday, fast user switching has been having problems. Randomly, when I change to another account (all are password protected), it will just instantly log me out, without even trying to close apps etc. - it literally takes it a second to log out, then I have to go back in and log in from scratch.
View 3 Replies
View Related
Aug 18, 2010
I was wondering if there is a way to choose options using keyboard arrows. For example, when Finder asks me whether I want to open a downloaded file from the internet, and I want to say "No", I want to be able to press left and press enter and that'll be it. Instead, I have to use my mouse to click on No.
Is there a way to do this? I went to System Prefs, Keyboards, and clicked on All Controls, but that wasn't the solution.
View 2 Replies
View Related
Mar 14, 2009
If you look at apple's battery life page it states the MBA battery is removable, I thought it wasn't supposed to be?Battery Lifespan For Apple notebooks with removable batteries ? such as the MacBook, MacBook Air, and 15-inch MacBook Pro ? a properly maintained battery is designed to retain up to 80% of its original capacity at 300 full charge and discharge cycles. You may choose to replace your battery when it no longer holds sufficient charge to meet your needs.
View 1 Replies
View Related
Nov 3, 2008
A new buyer of Apple's uninbody notebooks emailed Steve Jobs about issues he was having with the unit's new glass trackpad and hinge, and reports getting a prompt reply via the telephone addressing his problems.The main issue he reported was the new trackpad's failure to register every physical click, a problem AppleInsider noted in its in-depth review. The Apple representative that called back reported that the company is looking into the complaints, but has no immediate resolution. The user also complained about the display hinge on the new model, which now has a more precise feel but less friction, allowing the lid to fall shut by gravity when held at an angle, such as when laying in bed. A video in our review of the new MacBook Pro highlights this new design change over previous 'Aluminum' PowerBook and MacBook Pro models.
View 39 Replies
View Related
Nov 17, 2008
Apple has released a software update to address an issue where trackpad clicks would randomly go unrecognized on its latest notebook offerings: the MacBook (Late 2008) and MacBook Pro (Late 2008)."This firmware update addresses an issue where trackpad clicks may not be recognized on MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008) computers," the company said. Installing the updateYou can download and install the update from the Software Update mechanism built into Mac OS X. Alternatively, you can download the update manually and follow a two part process: installing the firmware update [Download - 923KB] application onto your hard drive and using the firmware update application to update your trackpad's firmware.
View 24 Replies
View Related
Dec 29, 2008
I have a g4 1.5 powerbook that I use everyday.Today I went to turn it on and all I am getting on the start up is the Apple symbol and the hourglass circle that just keeps spinning. I am pretty sure the hard disc is the problem. Bc, I can't hear it spinning.
View 24 Replies
View Related
Sep 14, 2009
I just placed an order for the 24" iMac. Apple lists the weight of this machine as 25 lbs. I intend for it to be my primary desktop machine, claiming its residence atop my computer desk which is made of 8mm-thick tempered glass and aluminum framing.My only concern is that 25 lbs might be too heavy for the glass. Unfortunately I cannot find a maximum load specification for the desk anywhere. If I can find the manufacturer's number I'll certainly call them but I can't find that either. So, anyone here have a similar setup and care to comment? Coming home and finding shattered glass and 2 grand of mangled hardware wouldn't make for a happy time!
View 12 Replies
View Related
Dec 9, 2009
where can I order glass for my 27 inch Imac ? I ve got a huge crack on it , due to my own stupidity , and now im trying to get a new one , but apple service centers in Moscow are telling me to wait 2-3 months . I find it ridiculous and therefore asking for help , where can I order glass for imac ? its only 1 week old .
View 15 Replies
View Related
Feb 4, 2010
This may seem odd, but I think my iMac is melting. I started to clean my iMac with a simple cleaning cloth then i realized spots on the screen. The aren't really visible when the screen is on, but you can still kind of see them. Not only that, the quality of the images on my screen seems to be deteriorating. It is only visible under light. I have attached some photos, but i wanted to know if anyones iMac has done this before(regardless of size, but post it in case), and if apple will fix it?
View 8 Replies
View Related
Feb 22, 2010
I have recently upgraded from a 24" iMac to a 27". The screen is great, but after a few hours of work (this is my work machine), my eyes really begin to bother me.Has anyone out there tried using their iMac without the front glass sheet over the LCD? What does the LCD look like?I don't have any children around, so I'm not worried about the screen being scratched or damaged -- but if course I would eventually need to clean it just to remove the dust build up.
View 24 Replies
View Related
Aug 19, 2010
I ordered a 2.93 i7 / 8Gb Ram / SSD + 2TB from the Apple Singapore online store and received it yesterday. Shipping info showed that it originated from Shanghai China.
As soon as I opened the box and took the imac out, this is what I found: on the lower left corner of the black glass (not on the screen but on the bezel that surrounds the screen) , was a small silver bubble like crack inside the glass. At first I thought it was a stain and tried to rub it off but quickly realized that it was inside the glass.
On further inspection, I found that the entire black glass at the bottom corner was protruding slightly out while on the right side the glass was slightly protruding in.
Obviously a manufacturing defect.
I was also very surprised to see the general condition of the unit that was supposed to be brand new and pristine - it looked like there were smudges on the glass in various places, dust on the outside and tiny black spots on the aluminum. Most disturbing was that the thin plastic that is stuck on and covers the pedestal for shipping was partially unstuck - like it had been peeled of earlier and then stuck back on.
It was really weird - this was supposed to be brand new but it seemed almost like it was a refurbished machine. I was wondering if it was caused by the factory since it is BTO - do they open up a new box and add in the SSD RAM etc then pack it back up - maybe not being careful when they do it and it causes the smudges and possible other damages?
I could not deal with the damaged glass as you could plainly see it on the black bezel, so I called and Apple said they would replace it. The box was picked up the same day and I am now waiting to get the email acknowledging that a new unit is being sent.
Kudos to Apple to send a replacement without fuss but the general condition of the supposedly new unit was really suspicious.
Has anyone else seen these issues with new 27 imacs? I am also wondering if folks are seeing these issues from just the Shanghai factory or from all factories?
Hope my new unit arrives soon without any new problems. Just in case you are wondering, I did not even turn it on - as soon as I saw that defect on the glass, I had to return it.
View 9 Replies
View Related
Jan 9, 2011
this is not super great.My iMac is maybe 14 months old, left it turned on (sleep mode) for a day and forgot it was turned on, it's that quiet and that's a good thing.The bad thing, I now have condensation behind the glass on the iMac panel.It's mostly in the right and left upper areas of the panel. How did this happen?!I have Applecare, what am I likely to expect from Apple? Is this a design problem?
View 10 Replies
View Related
Aug 27, 2007
I thought I won't buy a new imac, because of the glossy glassdisplay. And, yes, I took a look at the imac at a gravis-store. I have seen it in real life and I don't like it.BUT: As I have read, it is easy to remove the glass, so my question is: Has anybody already done this and is working now with a glassless imac? What are your impressions? Do you see any drawbacks (apart from fact, that it will look a little bit nerdy
View 24 Replies
View Related
May 14, 2009
I was watching a movie today, and noticed a dot on the screen. I scrubbed it hardcore, and it didn't go away. I freaked out because it might be a stuck pixel. After close observation, there are tiny extensions (probably its feet) around the 1-2 pixel size bug. I've taken a screen capture, but the bug is not displayed on it. Is it actually a bug? Should I take the glass off and exterminate the thing?
View 4 Replies
View Related
Oct 29, 2009
I am thinking of buying the base 27 inch iMac and upgrading the hard drive myself. I read few threads here of people doing it but I am concerned about breaking the glass while lifting it off. I am somewhat handy having replaced the hard drive several times on my white iMac which is no picnic. Any thoughts on this from people who have taken off the glass on the new mac or even the older 24 inch display glass?
View 8 Replies
View Related
Nov 21, 2009
I purchased an iMac 21.5" recently and unfortunately it came with a dead pixel(black) and I can see some hot pixels, also. Can these hot pixels be dust though?
In top-middle part of the screen(where iSight is located) the glass that protects the screen actually has a gap. I mean, in the right and left parts the glass seem to be more stuck than in the middle part.
Actually I can even put my nail inside the glass and I suppose, it can be removed if a lot of pressure is applied. Are all iMacs supposed to be like that?
Maybe dust gets through there so that's why I see these "hot" pixels.
Do not tell me to remove the frame and clean it up, it's one day old. I just want to know if it is supposed to have that small gap on the top center part.
View 1 Replies
View Related
Apr 6, 2012
how do i get my apple email to work after switching to icloud?
Info:
iMac, Mac OS X (10.7.3)
View 2 Replies
View Related
Oct 21, 2010
There are a few very small specs assumably under the glass of my iMac. Its white when the screen is of but it changes colors according to what is showing on the screen. What is it? And how can i get it out?
View 8 Replies
View Related
Nov 13, 2009
Maybe this is going to sound silly but do I have to worry about this thing being too heavy for my glass-top Office Max desk? It's 30.5 lbs, twice as heavy as the Dell widescreen monitor I currently use. This is my first all-in-one so it's all new to me!
View 15 Replies
View Related
Jun 17, 2010
I wish I could take a picture of it, but every picture that I've taken so far has developed into a blurry hue. At, first, I thought the screen was just dirty, until upon closer examination did I discover that this little ******* is an ant. It's stuck between the glass and actual monitor directly below the Safari icon in the dock that I have left at the bottom of the screen. I have a feeling that it crawled in through the speakers on the bottom of the monitor, next to where the ram modules sit. I hope it's not planning to nest and start an entire colony on my i7 8GB iMac! That would suck.
View 16 Replies
View Related
Jul 5, 2010
I took my iMac panel off to clean and when I put it back I noticed as you run your finger from the bottom of the panel left to right or right to left, the glass begins to get thicker and eventually overlap just barely the metal in the middle. I can't remember if it was like this or not before, so I am wondering is this bent? And if so what should I do?
View 2 Replies
View Related
Feb 25, 2009
What's your thoughts of using the current iMac without the glass panel in place? This would be to avoid the glare and such of the screen and hopefully to make it more accurate for colour-specific work.
View 4 Replies
View Related
Feb 13, 2010
i went to clean some smudges on my screen today and noticed that there are some spots on the other side of the screen's glass... this there for anyone else? It's pretty freaking annoying. This machine should be perfect.
View 1 Replies
View Related
Jun 18, 2010
I've read quite a lot about the glossy screens on iMacs and advice offered has been to use a 3m matt film product or remove the glass from the front. Is anyone actually using either of those 2 methods successfully with their iMac? The 3m matt film sounds like it might be awkward to fit without airbubbles etc and might affect sharpness/colour etc Removing the glass from the front could make the screen vulnerable when using things like calibrator devices that need to sit on the screen to work, I don't care what it looks like BTW
Power and features wise the i7 iMac is all the computer I need but need a matt screen is no good for me. I will splurge on a macpro and monitor but its just more than I need and so would prefer the saving
View 1 Replies
View Related
Sep 12, 2010
Glass over hangs on left and is in a bit on right side on my new 27" i5. So is this normal? Also I think my screen is a little yellow bottom right.
View 7 Replies
View Related
