This may seem odd, but I think my iMac is melting. I started to clean my iMac with a simple cleaning cloth then i realized spots on the screen. The aren't really visible when the screen is on, but you can still kind of see them. Not only that, the quality of the images on my screen seems to be deteriorating. It is only visible under light. I have attached some photos, but i wanted to know if anyones iMac has done this before(regardless of size, but post it in case), and if apple will fix it?
there is a small chip behind the glass of my 27" imac. It's about the size of a small crumb or the eye of a small needle. It's hard to see, but it's definitely there. Today is my last day to get the imac replaced or repaired. I have a feeling if I bring it in that they will see there's no reason to swap out the entire imac, and if there is I would have to wait awhile because it's a custom high end one so they don't have the specsI'm worried if they swap the glass that it's just some 19 year old kid that does it and he won't be careful with the screen and will get dust, finger prints, etc. on the glass making it worse.
More and more I am noticing distortions on the glass of my iMac. When its on there isnt any visible marks and it looks good.
But once I turn it off, all of these marks sort of start appearing. I took some pictures, could you please take a look at it and let me know whats wrong?
I was watching a movie today, and noticed a dot on the screen. I scrubbed it hardcore, and it didn't go away. I freaked out because it might be a stuck pixel. After close observation, there are tiny extensions (probably its feet) around the 1-2 pixel size bug. I've taken a screen capture, but the bug is not displayed on it. Is it actually a bug? Should I take the glass off and exterminate the thing?
I purchased an iMac 21.5" recently and unfortunately it came with a dead pixel(black) and I can see some hot pixels, also. Can these hot pixels be dust though?
In top-middle part of the screen(where iSight is located) the glass that protects the screen actually has a gap. I mean, in the right and left parts the glass seem to be more stuck than in the middle part.
Actually I can even put my nail inside the glass and I suppose, it can be removed if a lot of pressure is applied. Are all iMacs supposed to be like that? Maybe dust gets through there so that's why I see these "hot" pixels.
Do not tell me to remove the frame and clean it up, it's one day old. I just want to know if it is supposed to have that small gap on the top center part.
I wish I could take a picture of it, but every picture that I've taken so far has developed into a blurry hue. At, first, I thought the screen was just dirty, until upon closer examination did I discover that this little ******* is an ant. It's stuck between the glass and actual monitor directly below the Safari icon in the dock that I have left at the bottom of the screen. I have a feeling that it crawled in through the speakers on the bottom of the monitor, next to where the ram modules sit. I hope it's not planning to nest and start an entire colony on my i7 8GB iMac! That would suck.
i went to clean some smudges on my screen today and noticed that there are some spots on the other side of the screen's glass... this there for anyone else? It's pretty freaking annoying. This machine should be perfect.
I've read quite a lot about the glossy screens on iMacs and advice offered has been to use a 3m matt film product or remove the glass from the front. Is anyone actually using either of those 2 methods successfully with their iMac? The 3m matt film sounds like it might be awkward to fit without airbubbles etc and might affect sharpness/colour etc Removing the glass from the front could make the screen vulnerable when using things like calibrator devices that need to sit on the screen to work, I don't care what it looks like BTW
Power and features wise the i7 iMac is all the computer I need but need a matt screen is no good for me. I will splurge on a macpro and monitor but its just more than I need and so would prefer the saving
I just placed an order for the 24" iMac. Apple lists the weight of this machine as 25 lbs. I intend for it to be my primary desktop machine, claiming its residence atop my computer desk which is made of 8mm-thick tempered glass and aluminum framing.My only concern is that 25 lbs might be too heavy for the glass. Unfortunately I cannot find a maximum load specification for the desk anywhere. If I can find the manufacturer's number I'll certainly call them but I can't find that either. So, anyone here have a similar setup and care to comment? Coming home and finding shattered glass and 2 grand of mangled hardware wouldn't make for a happy time!
where can I order glass for my 27 inch Imac ? I ve got a huge crack on it , due to my own stupidity , and now im trying to get a new one , but apple service centers in Moscow are telling me to wait 2-3 months . I find it ridiculous and therefore asking for help , where can I order glass for imac ? its only 1 week old .
I just received my new iMac and when I booted it today I had a 4 x 4 inch square condensation patch on the screen just below the webcam. It took 20 minutes to disappear. As the sun was shining through the window I also noticed marks on the screen.First of all I thought they were on the glass and so I wiped the screen with the cleaning cloth, but these are marks are under the glass. Worse of all I also have 4 stuck pixels which are down the centre of the screen. Surely this should be replaced.
I have recently upgraded from a 24" iMac to a 27". The screen is great, but after a few hours of work (this is my work machine), my eyes really begin to bother me.Has anyone out there tried using their iMac without the front glass sheet over the LCD? What does the LCD look like?I don't have any children around, so I'm not worried about the screen being scratched or damaged -- but if course I would eventually need to clean it just to remove the dust build up.
I ordered a 2.93 i7 / 8Gb Ram / SSD + 2TB from the Apple Singapore online store and received it yesterday. Shipping info showed that it originated from Shanghai China.
As soon as I opened the box and took the imac out, this is what I found: on the lower left corner of the black glass (not on the screen but on the bezel that surrounds the screen) , was a small silver bubble like crack inside the glass. At first I thought it was a stain and tried to rub it off but quickly realized that it was inside the glass.
On further inspection, I found that the entire black glass at the bottom corner was protruding slightly out while on the right side the glass was slightly protruding in.
Obviously a manufacturing defect.
I was also very surprised to see the general condition of the unit that was supposed to be brand new and pristine - it looked like there were smudges on the glass in various places, dust on the outside and tiny black spots on the aluminum. Most disturbing was that the thin plastic that is stuck on and covers the pedestal for shipping was partially unstuck - like it had been peeled of earlier and then stuck back on.
It was really weird - this was supposed to be brand new but it seemed almost like it was a refurbished machine. I was wondering if it was caused by the factory since it is BTO - do they open up a new box and add in the SSD RAM etc then pack it back up - maybe not being careful when they do it and it causes the smudges and possible other damages?
I could not deal with the damaged glass as you could plainly see it on the black bezel, so I called and Apple said they would replace it. The box was picked up the same day and I am now waiting to get the email acknowledging that a new unit is being sent.
Kudos to Apple to send a replacement without fuss but the general condition of the supposedly new unit was really suspicious.
Has anyone else seen these issues with new 27 imacs? I am also wondering if folks are seeing these issues from just the Shanghai factory or from all factories?
Hope my new unit arrives soon without any new problems. Just in case you are wondering, I did not even turn it on - as soon as I saw that defect on the glass, I had to return it.
this is not super great.My iMac is maybe 14 months old, left it turned on (sleep mode) for a day and forgot it was turned on, it's that quiet and that's a good thing.The bad thing, I now have condensation behind the glass on the iMac panel.It's mostly in the right and left upper areas of the panel. How did this happen?!I have Applecare, what am I likely to expect from Apple? Is this a design problem?
I thought I won't buy a new imac, because of the glossy glassdisplay. And, yes, I took a look at the imac at a gravis-store. I have seen it in real life and I don't like it.BUT: As I have read, it is easy to remove the glass, so my question is: Has anybody already done this and is working now with a glassless imac? What are your impressions? Do you see any drawbacks (apart from fact, that it will look a little bit nerdy
I am thinking of buying the base 27 inch iMac and upgrading the hard drive myself. I read few threads here of people doing it but I am concerned about breaking the glass while lifting it off. I am somewhat handy having replaced the hard drive several times on my white iMac which is no picnic. Any thoughts on this from people who have taken off the glass on the new mac or even the older 24 inch display glass?
There are a few very small specs assumably under the glass of my iMac. Its white when the screen is of but it changes colors according to what is showing on the screen. What is it? And how can i get it out?
Maybe this is going to sound silly but do I have to worry about this thing being too heavy for my glass-top Office Max desk? It's 30.5 lbs, twice as heavy as the Dell widescreen monitor I currently use. This is my first all-in-one so it's all new to me!
I took my iMac panel off to clean and when I put it back I noticed as you run your finger from the bottom of the panel left to right or right to left, the glass begins to get thicker and eventually overlap just barely the metal in the middle. I can't remember if it was like this or not before, so I am wondering is this bent? And if so what should I do?
What's your thoughts of using the current iMac without the glass panel in place? This would be to avoid the glare and such of the screen and hopefully to make it more accurate for colour-specific work.
I'm making the transition over to Apple.. I'm considering either the new 21.5" iMac or a refurbished 24". I'll be using this for photography and will need to use the built-in screen until I allocate funds for a better monitor like the NEC LCD2690WUXI2. I recently found this article http://www.fireandknowledge.org/arch...en-glare-free/ Can someone (who has tested this) confirm if this same technique will work on the new 21.5" iMac?
I have just purchased a new imac 27" but noticed that the glass screen on the front did not fit flush on the left side to the aluminium unit. The overhang could be quite clearly seen from front and back and running your finger along it confirmed it stuck out with a resultant slightly sharp corner to the bottom right.I arranged for the return and replacement of the unit and a new one arrived today, I have not yet seen it myself, but my partner said it seems to have the same problem only this time on the right hand side! He also seems to think the hard drive is far more audible on this replacement.Has anyone else had similar issues? I don't know whether we are just being too fussy, but I've not seen it like this in the shops and for ?1649 I want it to be right!
I've had a few bad experiences with Apple in the past- namely, going to their Sydney Apple Store to get my logic board repaired, but came out with a scratched bottom case that the Genius couldn't replace. Anyway, six months have passed and my screen has dust underneath it. My speakers have 'blown', well, not really, but they sound very cheap now. My graphics card has also gone a bit wonky. Do you think they'll replace my Macbook Pro this time?
I'm sure this should be simple but I can't figure it out.
I have my iMac connected to my TV and am using Plex to watch stuff on the TV.
What I'd like to do is turn my imac screen off without turning off the second monitor output (i.e. tv) as the imac screen is a bit bright/distracting (even on lowest brightness) when watching in the dark.
I'm not a big fan of the reflective glass of the new iMac models. Did the last model (24") of aluminum iMac have the same glass? Or was it the glossy but not shiny display?
I understand these machines burn images into screens sometimes, but they fade back to normal after a while. My issue is that its taking less and less time to burn images into my screen. It's so bad, I avoid using the left side of the screen because simply leaving anything there for a full minute burns the crap out of it. Oddly, this only effects the left third of the screen.
I remember taking it up to an apple store (not fun, considering none are near me. The address their tech support gave me actually went to a pawn shop.) but they simply told me to leave the itunes visualizer running every now and then.
Back then it was just mildly irritating. Now I cant do anything with that side of the screen! Would replacing the LCD resolve this issue?
Below is a picture taken from my motorola razr. I know it's bad, but that's all I have.
So I've had my 24" Al iMac ever since November 2007, good and everything until the past couple days, after extended use of the imac, everything is fine, screen is great, but when entering screensaver, its still great, its like a couple minutes or so into the screen saver when the top of my iMac's screen starts to flicker! When I move the mouse to get out of the screen saver, every thing is back to normal. It happens with all screen savers.
Just now I was posting an add on Gumtree trying to sell my iMac, then I went into Dashboard to look at some notes and noticed some black indent- like text, from the Gumtree add. Is this screen burn?
I had a quick search on Google and found out that this happens more in cold environments. My room is very cold at the moment, but I haven't had anything like this happen before.
So, is this something that Apple can fix if I send the iMac in? It's still under AppleCare.
