this is not super great.My iMac is maybe 14 months old, left it turned on (sleep mode) for a day and forgot it was turned on, it's that quiet and that's a good thing.The bad thing, I now have condensation behind the glass on the iMac panel.It's mostly in the right and left upper areas of the panel. How did this happen?!I have Applecare, what am I likely to expect from Apple? Is this a design problem?
View 10 RepliesI just received my new iMac and when I booted it today I had a 4 x 4 inch square condensation patch on the screen just below the webcam. It took 20 minutes to disappear. As the sun was shining through the window I also noticed marks on the screen.First of all I thought they were on the glass and so I wiped the screen with the cleaning cloth, but these are marks are under the glass. Worse of all I also have 4 stuck pixels which are down the centre of the screen. Surely this should be replaced.
View 13 Replies View Relatedthere is a small chip behind the glass of my 27" imac. It's about the size of a small crumb or the eye of a small needle. It's hard to see, but it's definitely there. Today is my last day to get the imac replaced or repaired. I have a feeling if I bring it in that they will see there's no reason to swap out the entire imac, and if there is I would have to wait awhile because it's a custom high end one so they don't have the specsI'm worried if they swap the glass that it's just some 19 year old kid that does it and he won't be careful with the screen and will get dust, finger prints, etc. on the glass making it worse.
View 3 Replies View RelatedI just placed an order for the 24" iMac. Apple lists the weight of this machine as 25 lbs. I intend for it to be my primary desktop machine, claiming its residence atop my computer desk which is made of 8mm-thick tempered glass and aluminum framing.My only concern is that 25 lbs might be too heavy for the glass. Unfortunately I cannot find a maximum load specification for the desk anywhere. If I can find the manufacturer's number I'll certainly call them but I can't find that either. So, anyone here have a similar setup and care to comment? Coming home and finding shattered glass and 2 grand of mangled hardware wouldn't make for a happy time!
View 12 Replies View Relatedwhere can I order glass for my 27 inch Imac ? I ve got a huge crack on it , due to my own stupidity , and now im trying to get a new one , but apple service centers in Moscow are telling me to wait 2-3 months . I find it ridiculous and therefore asking for help , where can I order glass for imac ? its only 1 week old .
View 15 Replies View RelatedThis may seem odd, but I think my iMac is melting. I started to clean my iMac with a simple cleaning cloth then i realized spots on the screen. The aren't really visible when the screen is on, but you can still kind of see them. Not only that, the quality of the images on my screen seems to be deteriorating. It is only visible under light. I have attached some photos, but i wanted to know if anyones iMac has done this before(regardless of size, but post it in case), and if apple will fix it?
View 8 Replies View RelatedI have recently upgraded from a 24" iMac to a 27". The screen is great, but after a few hours of work (this is my work machine), my eyes really begin to bother me.Has anyone out there tried using their iMac without the front glass sheet over the LCD? What does the LCD look like?I don't have any children around, so I'm not worried about the screen being scratched or damaged -- but if course I would eventually need to clean it just to remove the dust build up.
View 24 Replies View RelatedI ordered a 2.93 i7 / 8Gb Ram / SSD + 2TB from the Apple Singapore online store and received it yesterday. Shipping info showed that it originated from Shanghai China.
As soon as I opened the box and took the imac out, this is what I found: on the lower left corner of the black glass (not on the screen but on the bezel that surrounds the screen) , was a small silver bubble like crack inside the glass. At first I thought it was a stain and tried to rub it off but quickly realized that it was inside the glass.
On further inspection, I found that the entire black glass at the bottom corner was protruding slightly out while on the right side the glass was slightly protruding in.
Obviously a manufacturing defect.
I was also very surprised to see the general condition of the unit that was supposed to be brand new and pristine - it looked like there were smudges on the glass in various places, dust on the outside and tiny black spots on the aluminum. Most disturbing was that the thin plastic that is stuck on and covers the pedestal for shipping was partially unstuck - like it had been peeled of earlier and then stuck back on.
It was really weird - this was supposed to be brand new but it seemed almost like it was a refurbished machine. I was wondering if it was caused by the factory since it is BTO - do they open up a new box and add in the SSD RAM etc then pack it back up - maybe not being careful when they do it and it causes the smudges and possible other damages?
I could not deal with the damaged glass as you could plainly see it on the black bezel, so I called and Apple said they would replace it. The box was picked up the same day and I am now waiting to get the email acknowledging that a new unit is being sent.
Kudos to Apple to send a replacement without fuss but the general condition of the supposedly new unit was really suspicious.
Has anyone else seen these issues with new 27 imacs? I am also wondering if folks are seeing these issues from just the Shanghai factory or from all factories?
Hope my new unit arrives soon without any new problems. Just in case you are wondering, I did not even turn it on - as soon as I saw that defect on the glass, I had to return it.
My screen has condensation inside
Info:
iMac
My macbook pro is almost always in my room. The problem is that at night my room gets the coldest (around high 50's to 60's). I don't have a case yet, as school has not started. Is this particularly bad form my MBP if I, take my MBP out of my room and move it to family room to use it. (the family room is around 70's in the morning)
I have heard of internal condensation, but would this be a problem in my case. I guess at night the temp is high 50's than by morning (b/c of the sun) the temp rises slowly to about high 60's, than I move it to family room, mid 70's? Its not below freezing at my house (I live in Southern Cal.), but again wondering if this is right.
I thought I won't buy a new imac, because of the glossy glassdisplay. And, yes, I took a look at the imac at a gravis-store. I have seen it in real life and I don't like it.BUT: As I have read, it is easy to remove the glass, so my question is: Has anybody already done this and is working now with a glassless imac? What are your impressions? Do you see any drawbacks (apart from fact, that it will look a little bit nerdy
View 24 Replies View RelatedI was watching a movie today, and noticed a dot on the screen. I scrubbed it hardcore, and it didn't go away. I freaked out because it might be a stuck pixel. After close observation, there are tiny extensions (probably its feet) around the 1-2 pixel size bug. I've taken a screen capture, but the bug is not displayed on it. Is it actually a bug? Should I take the glass off and exterminate the thing?
View 4 Replies View RelatedI am thinking of buying the base 27 inch iMac and upgrading the hard drive myself. I read few threads here of people doing it but I am concerned about breaking the glass while lifting it off. I am somewhat handy having replaced the hard drive several times on my white iMac which is no picnic. Any thoughts on this from people who have taken off the glass on the new mac or even the older 24 inch display glass?
View 8 Replies View RelatedI purchased an iMac 21.5" recently and unfortunately it came with a dead pixel(black) and I can see some hot pixels, also. Can these hot pixels be dust though?
In top-middle part of the screen(where iSight is located) the glass that protects the screen actually has a gap. I mean, in the right and left parts the glass seem to be more stuck than in the middle part.
Actually I can even put my nail inside the glass and I suppose, it can be removed if a lot of pressure is applied. Are all iMacs supposed to be like that?
Maybe dust gets through there so that's why I see these "hot" pixels.
Do not tell me to remove the frame and clean it up, it's one day old. I just want to know if it is supposed to have that small gap on the top center part.
There are a few very small specs assumably under the glass of my iMac. Its white when the screen is of but it changes colors according to what is showing on the screen. What is it? And how can i get it out?
View 8 Replies View RelatedMaybe this is going to sound silly but do I have to worry about this thing being too heavy for my glass-top Office Max desk? It's 30.5 lbs, twice as heavy as the Dell widescreen monitor I currently use. This is my first all-in-one so it's all new to me!
View 15 Replies View RelatedI wish I could take a picture of it, but every picture that I've taken so far has developed into a blurry hue. At, first, I thought the screen was just dirty, until upon closer examination did I discover that this little ******* is an ant. It's stuck between the glass and actual monitor directly below the Safari icon in the dock that I have left at the bottom of the screen. I have a feeling that it crawled in through the speakers on the bottom of the monitor, next to where the ram modules sit. I hope it's not planning to nest and start an entire colony on my i7 8GB iMac! That would suck.
View 16 Replies View RelatedI took my iMac panel off to clean and when I put it back I noticed as you run your finger from the bottom of the panel left to right or right to left, the glass begins to get thicker and eventually overlap just barely the metal in the middle. I can't remember if it was like this or not before, so I am wondering is this bent? And if so what should I do?
View 2 Replies View RelatedWhat's your thoughts of using the current iMac without the glass panel in place? This would be to avoid the glare and such of the screen and hopefully to make it more accurate for colour-specific work.
View 4 Replies View Relatedi went to clean some smudges on my screen today and noticed that there are some spots on the other side of the screen's glass... this there for anyone else? It's pretty freaking annoying. This machine should be perfect.
View 1 Replies View RelatedI've read quite a lot about the glossy screens on iMacs and advice offered has been to use a 3m matt film product or remove the glass from the front. Is anyone actually using either of those 2 methods successfully with their iMac? The 3m matt film sounds like it might be awkward to fit without airbubbles etc and might affect sharpness/colour etc Removing the glass from the front could make the screen vulnerable when using things like calibrator devices that need to sit on the screen to work, I don't care what it looks like BTW
Power and features wise the i7 iMac is all the computer I need but need a matt screen is no good for me. I will splurge on a macpro and monitor but its just more than I need and so would prefer the saving
Glass over hangs on left and is in a bit on right side on my new 27" i5. So is this normal? Also I think my screen is a little yellow bottom right.
View 7 Replies View RelatedI'm making the transition over to Apple.. I'm considering either the new 21.5" iMac or a refurbished 24". I'll be using this for photography and will need to use the built-in screen until I allocate funds for a better monitor like the NEC LCD2690WUXI2. I recently found this article http://www.fireandknowledge.org/arch...en-glare-free/ Can someone (who has tested this) confirm if this same technique will work on the new 21.5" iMac?
View 6 Replies View RelatedI have just purchased a new imac 27" but noticed that the glass screen on the front did not fit flush on the left side to the aluminium unit. The overhang could be quite clearly seen from front and back and running your finger along it confirmed it stuck out with a resultant slightly sharp corner to the bottom right.I arranged for the return and replacement of the unit and a new one arrived today, I have not yet seen it myself, but my partner said it seems to have the same problem only this time on the right hand side! He also seems to think the hard drive is far more audible on this replacement.Has anyone else had similar issues? I don't know whether we are just being too fussy, but I've not seen it like this in the shops and for ?1649 I want it to be right!
View 3 Replies View RelatedI'm not a big fan of the reflective glass of the new iMac models. Did the last model (24") of aluminum iMac have the same glass? Or was it the glossy but not shiny display?
View 1 Replies View RelatedWirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_1 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Version/4.0.5 Mobile/8B117 Safari/6531.22.7)
how many think the new mbp will have glass over the screen. it was not used on new mba but never was
I was reading and old review of the macbook air on apple insider and at the last page of the 5page review they have high quality pictures showing off the air at different angles. Some of them are showing the trackpad and u can clearly see what looks to be a glass coating, much in the same way as the new macbook and pro has.Knowing that the air was the first computer that got the "brick" enclosure without apple telling us about it untill recently. Maby they wanted to save this little cool atribute also?
View 12 Replies View RelatedSimple question. I know it isn't the no-button trackpad (thank God), but is it glass like the updated ones?
View 9 Replies View RelatedI'm looking into what is good to keep my MBP screen clean from residue such as saliva (from the dreaded coughs) and dirt.
What do you guys use to keep your screen free from residue? Do you guys use any solutions?
Would using a lint-free cloth (such as the ones made for wiping spectacles with) work?
My macbook pro is Early 2010 model. I had it for like 4 months now. For some reason, my macbook pro's trackpad is slow. It doesn't scroll fast and it freezes on me. Not the macbook pro, but glass trackpad is just unresponsive.
View 2 Replies View Related