I have a 24" 2.66 bought in Oct 09 and it is current with updates. No matter what I do it will not stay asleep, even when I manually put in down with the power button it wakes a short time later. Is there no solution to this simple problem I know many experience?
View 4 RepliesI have been having an odd problem the past couple of days. Every time I put my MBP to sleep, it wakes up immediately after the fans shut off. I have tried shutting down all of my programs and even killing of most of my process in activity monitor to no avail.
View 4 Replies View RelatedThe computer boots sometimes, othertimes not at all. When it does turn on it stays on for an unreliable ammount of time before shutting off.
ANybody ever take the case off and blow air over the inside to clear out dust?
I am desperate and really need an answer to this question. I have tried everything and had no luck.
I have a MacBook Pro (13-inch, Mid 2012) running Yosemite. Whenever I close the screen, it will fall asleep like it normally does. However, the external light will only pulse once (instead of continuously), and then I can hear the hard drive begin spinning again. The external light then stays at a constant, but the screen does not light back up.
It's like the computer falls asleep, but then only the hard drive wakes up, and stays woken up. This fact causes my Macbook to eventually use up whatever battery power it has and get warm in my backpack. The only thing I can do to preserve battery power is to shut down the whole computer and boot it up every time I need it.
Also, on a side note. My computer seems to run much slower than it did on it's native Mavericks.
Info:
MacBook Pro (13-inch Mid 2012), OS X Yosemite (10.10.1)
Just wondering if anyone else is having a problem with their i7 not staying asleep. worked wonderfully until the firmware update but not clear if that had anything to do with the change.
tried everything so far, from shutting down the magic mouse to unclicking network wake on demand.....no change...
If i set my displays to sleep in 1 minute (say, if I leave it on overnight, and want it to sleep pretty quickly), they both come back to life after a few minutes. Since they're bright, they absolutely illuminate the room and the S/O isn't too happy with me.
I have an Alu iMac 24", Dell 24", bluetooth mouse, external USB drive, USB keyboard. I tried switching off the bluetooth mouse, and it was no better.
I put my iMac to sleep before I go to bed and it usually stays in that state until I get up. Lately something is waking it routinely during the night. I have attempted to fix this by following the suggestions in Mac Help but I still can't get to the bottom of it.
View 6 Replies View RelatedWith OSX 10.6.4 my 2.66 GHz iMac will not stay asleep. It will wake up even though the Wake for Network Access box is NOT checked in System Preferences. Why is this? This happens every night. It is becoming very frustrating.
For some reason (which I hope someone knows why) my computer started to not stay sleeping. I would go to the apple menu, select sleep, the screen goes dark but then a few seconds later the screen comes back on. I haven't changed any preferences so not sure why it's doing this.
When using screen saver it stays.
Lion makes the sleep process take a while. But after a short time my Mac Pro wakes from sleep and even though I have it set up to go back to sleep after five minutes of inactivity it never goes back to sleep. This wasn't a problem with the first version of Lion.
Info:Mac Pro, Mac OS X (10.7.3), DP 2.7GHz Early 2009
So I am one of those guys that keep my desk in the same room I sleep, but can�t stand light of any kind while I am sleeping ( I know this will eventually be a hardship for me sometime, somewhere) .
Sure I know I could just move my desk out of the room and avoid this issue but I would like your input.
I like to leave my Mac book on and open with an external display always plugged in. I do not want to shut down or put it to sleep as I want it to be available 24/7 for some type of remote access. I currently have my display set to sleep after one minute with a hot corner to activate (running on 10.6.2) however at random the displays will wake and thus cause this light eyed sleeper to also wake. I can defeat this partially by killing power to one monitor every night but there is nothing I can do about the internal display short of turning down the backlight. I have wake for Ethernet disabled. Can anyone tell me, how can I do what I need to do? What type of background events cause the display to wake and why? And how if at all, can I stop them from doing this? I just want to only be able to wake the display from suspend or power save when I press a key on an attached keyboard.
I have a first gen Mac Pro with a 20" Apple Cinema Display connected to it. I always leave my computer in, but I let my display sleep. My display will go to sleep fine but it will wake up randomly and then fall back asleep again after the time interval. This has been going on for a long time but it's starting to really bother me.
View 5 Replies View RelatedI have a February 2008 MBP and am having issues with keeping it asleep. I currently have it set up as a desktop connected to an external monitor, keyboard and Magic Mouse (along with a variety of other peripherals) and I've recently noticed this issue. I'm running 10.6.1, I have tried everything from resetting the PRAM, SMC and repairing disk permissions to even installing a clean copy of Snow Leopard and restoring from Time Machine backup.
For power management, I have it set to never sleep, since I manually set it to sleep and don't want it sleeping on me when in use. I also have Wake on LAN activity disabled. Yet when I set it to sleep, at approximately noon the next day it wakes up by itself. I've even turned off the Magic Mouse to make sure it wasn't being moved by vibration and waking up the Mac. I'm completely stumped!
For troubleshooting purposes, I've installed a clean copy of SL without restoring TM backup to see if it's a program that's causing this issue or if it's a problem with a peripheral. I've yet to check back on it as I'm at work, but I'm hoping it's just software related. I'm at a loss as to what to do.
My Macbook Pro will not stay in sleep mode.
When I close the lid, it will go to sleep for about 5 seconds and then just continuously wake up, then sleep, then wake up etc.
If I press sleep for the menu it just wakes up again after about 5 seconds.
The battery is completely screwed and the laptop is often plugged in, but even when I take it off charge the same thing happens.
Been having a few huge issues with my new MBA 13".
#1 - Putting the laptop to sleep. I put the laptop to sleep and put it in the bag and at some point it wakes back up. If I don't remove it during the day by that afternoon/evening when I go to remove it the battery is at 0% and it's fully discharged. One day I took it out a couple hours in and the fan was blowing like mad like it had been running for a while, when I opened the lid I had a black screen and it was frozen. Disabled waked for network access but it was no help.
#2 - When the laptop goes in standby and I open it back up I get a beach ball forever - I've tried to let it go for upwards of 30 minutes and it never unfreezes, but I can move the mouse around. I ended up telling the laptop not to standby when it was plugged in to a power source otherwise I ended up always losing work.
Bought a new iMac in January, have a problem with the screen saver not coming on automatically after working okay for maybe three or four days. Have had about six calls and spent many hours with Apple techs. We get things working and then after a few days the hot corners won't hold, the screen saver won't come on automatically and the computer doesn't go to sleep as set up. If I manually put it to sleep it doesn't stay asleep for very long. Shutting down or a safe boot, will make it work right again.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3), miss the number pad
I have a 27" iMac purchased last January. Every time the computer wakes up, the display activates with normal coloring but after a second "shifts" into a different color profile with a blue'ish tint.
All software updates have been applied. I've reformatted the computer twice since the initial purchase. Problem persists.
I'm well aware of the yellow tinge problem with 27' iMacs, but based on my research of past posts the blue color shift has only been a problem with Macbooks.
I recently bought a 1st generation 500GB Time Capsule as I don't need the dual-band functionality of the 2nd Generation. Since setting it up I've been having a problem, whenever my iMac sleeps from a long period of time the backup is delayed when I wake the computer up. This would be less irritating if the backups continued like normal after the computer was awake, but I have to keep re-starting the backups manually to get the backup schedule back on track. This is especially frustrating as the whole point of the system is so I don't have to worry about manual backups.
View 1 Replies View RelatedWill fully charged battery on macbook stay charged overnight while computer is asleep?
View 4 Replies View RelatedI recently clean installed 10.5. I setup iChat with both AIM and Google Talk. Everything was running fine until now. When I start up iChat, the program logs in and out really fast until I receive this error message. "Could not connect to AIM... You have attempted to login too often in a short period of time. Wait a few minutes before trying to login again." This happens over and over again.
View 1 Replies View RelatedI remember a while back ago, well over a year ago I discovered online a software program only for the Mac intended to help people go to sleep and more importantly wake up. It utilized your iSight camera taking a photo (silently) every time there was movement, as the camera was positioned to focus on you sleeping, determining when you would be entering a REM sleep cycle and at what times would be best for the program to wake you up. It was a nifty little program though used a bit of ram to keep up since your iSight camera was on all night. That and the program did a few other interesting things too. I hope someone knows what I'm talking about.
I'd love to check this program out again but can't remember it's name. I'm only doing so since I've moved to a new apartment and am looking for a new method to wake me up in the morning aside from my cell phone's loud ring tones. Or there is this other alarm clock that you set on the opposite side of your room and have a little laser gun next to you and when the alarm rings in the morning you grab the gun and the alarm won't turn off till you shoot the laser w/ the gun directly into the bulls-eye within the alarm itself on the other side of the room.
As I was passing around a shop where they sold MBP's of all sizes, I tried them out. Amazingly, every single one of them seemed to freeze when I opened iPhoto, for not a short time. Am I not understanding something about it or is it just freezing?
View 5 Replies View RelatedI'm running Lion on my 27 inch iMac, after rebooting everything runs good for a short while. Then for some reason when I try to open an application like iPhoto, or iTunes, or and external hard drive the system freezes up.I can still open up a browser such as Safari, or Firefox, but no applications not even the Finder. Yesterday, I ran a new Lion when rebooting my system but that didn't help. From the utilities I repaired the Mac drive.
View 4 Replies View RelatedI have a Mac Mini with two external WD MyBook's attached. The drive in question, is configured for Time Machine backups every four hours. It should sleep the rest of the time. But every once in a while, it wakes. I just revs up for no reason, then after a short while it goes back to sleep. It can happen when I open a folder, open a file, click a link in the browser or some other seemingly unrelated action.
I tried to untick the "Put the hard disk(s) to sleep when possible" to see if I then at least could get the drive to stay awake instead. This did not change the behavior at all.
Does anybody have a clue what I can do, to get OS X to leave that drive the hell alone, other than Time Machine??
I own a early 2011 edition of MBP, with 2.3 Ghz i5 processor and 4 GB ram. Everytime it wakes up from the sleep mode, it heats up with the internal fans constantly on.. Moreover, the estimated battery life shows as 2 hours even when the percentage is 97%.. However, when I restart the MBP, the heating stops and the battery life shows 5 hours..
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
Purchased machine in Dec. 07. All well till Nov. 08. Since then have noticed that it will go into standby then wake up. This happens regularly, sometimes after 1 hour, or 2 hours or a few minutes. Have tried to put it in 'sleep' mode but wakes up just the same. All day and all night. So tried "shut down' and it does it as well. Like a ghost is working it.
Have been in constant touch with APPLE CARE, and they made me get another user (test) and it did not seem to wake up in that user. Went back to my user and problem started again. Spoke with 2 product specialists and one said that it cannot be EYETV, as he had it on his Mac and it was fine. Second specialist said it is EYETV and I should contact Elgato. I did this and was sent a link to 'repair'. Followed the instructions and that did not help. 4 days later, my computer suddenly remained in stand by all day.
I was surprised and relieved. Than it started all over again. I am at my wits end. I can only make it stay shut down if I go to 'shut down' and wait for the screen to go black then turn it off at the power point. I am sure that I should not be doing this, but what else can I do? I will contact APPLE CARE again, but will wait for your reply first. Also, I get a little message saying...Time Machine Error. Unable to complete backup. An error occured while copying files to backup volume.
I have 2 iMacs, both running Lion. Both are on my home wifi network and both have folders that are shared between both systems. When one iMac goes to sleep, I eventually lose it on the network. I have to go wake it up before it is again visible on the network so I can access the files on it.Is there some setting I can set that will allow the iMac to go to sleep and yet still be visible on the network. There is a setting that allows network activity to wake up the iMac but it does not seem to work.
Info:
iMac, Mac OS X (10.7.3)
imac screen goes black 27, still works but the screen goes black for short periods and increase the time it fails. Info: iMac (27-inch Mid 2011), Mac OS X (10.6.8), IS iMac (27-inch, Mid 2010)
View 6 Replies View RelatedThis has only just started yesterday, When I click on the Blue Apple on the top left corner and then click on "Sleep" my Mac goes blank then wakes up again within seconds.
View 2 Replies View RelatedI can't find any other thread out there about this. I was wondering what the fix for when my iMac 27 c2d comes out of sleep and pinwheels for about 4-5 sec. It only started doing this when I updated to 10.6.2
View 4 Replies View Related