MacBook Pro :: Won't Stay Asleep - Hard Drive Begin Spinning Again After Some Time
Dec 10, 2014
I am desperate and really need an answer to this question. I have tried everything and had no luck.
I have a MacBook Pro (13-inch, Mid 2012) running Yosemite. Whenever I close the screen, it will fall asleep like it normally does. However, the external light will only pulse once (instead of continuously), and then I can hear the hard drive begin spinning again. The external light then stays at a constant, but the screen does not light back up.
It's like the computer falls asleep, but then only the hard drive wakes up, and stays woken up. This fact causes my Macbook to eventually use up whatever battery power it has and get warm in my backpack. The only thing I can do to preserve battery power is to shut down the whole computer and boot it up every time I need it.
Also, on a side note. My computer seems to run much slower than it did on it's native Mavericks.
Info:
MacBook Pro (13-inch Mid 2012), OS X Yosemite (10.10.1)
I have a 24" 2.66 bought in Oct 09 and it is current with updates. No matter what I do it will not stay asleep, even when I manually put in down with the power button it wakes a short time later. Is there no solution to this simple problem I know many experience?
I have a February 2008 MBP and am having issues with keeping it asleep. I currently have it set up as a desktop connected to an external monitor, keyboard and Magic Mouse (along with a variety of other peripherals) and I've recently noticed this issue. I'm running 10.6.1, I have tried everything from resetting the PRAM, SMC and repairing disk permissions to even installing a clean copy of Snow Leopard and restoring from Time Machine backup.
For power management, I have it set to never sleep, since I manually set it to sleep and don't want it sleeping on me when in use. I also have Wake on LAN activity disabled. Yet when I set it to sleep, at approximately noon the next day it wakes up by itself. I've even turned off the Magic Mouse to make sure it wasn't being moved by vibration and waking up the Mac. I'm completely stumped!
For troubleshooting purposes, I've installed a clean copy of SL without restoring TM backup to see if it's a program that's causing this issue or if it's a problem with a peripheral. I've yet to check back on it as I'm at work, but I'm hoping it's just software related. I'm at a loss as to what to do.
I have been having an odd problem the past couple of days. Every time I put my MBP to sleep, it wakes up immediately after the fans shut off. I have tried shutting down all of my programs and even killing of most of my process in activity monitor to no avail.
Been having a few huge issues with my new MBA 13".
#1 - Putting the laptop to sleep. I put the laptop to sleep and put it in the bag and at some point it wakes back up. If I don't remove it during the day by that afternoon/evening when I go to remove it the battery is at 0% and it's fully discharged. One day I took it out a couple hours in and the fan was blowing like mad like it had been running for a while, when I opened the lid I had a black screen and it was frozen. Disabled waked for network access but it was no help.
#2 - When the laptop goes in standby and I open it back up I get a beach ball forever - I've tried to let it go for upwards of 30 minutes and it never unfreezes, but I can move the mouse around. I ended up telling the laptop not to standby when it was plugged in to a power source otherwise I ended up always losing work.
If i set my displays to sleep in 1 minute (say, if I leave it on overnight, and want it to sleep pretty quickly), they both come back to life after a few minutes. Since they're bright, they absolutely illuminate the room and the S/O isn't too happy with me.
I have an Alu iMac 24", Dell 24", bluetooth mouse, external USB drive, USB keyboard. I tried switching off the bluetooth mouse, and it was no better.
I put my iMac to sleep before I go to bed and it usually stays in that state until I get up. Lately something is waking it routinely during the night. I have attempted to fix this by following the suggestions in Mac Help but I still can't get to the bottom of it.
With OSX 10.6.4 my 2.66 GHz iMac will not stay asleep. It will wake up even though the Wake for Network Access box is NOT checked in System Preferences. Why is this? This happens every night. It is becoming very frustrating.
For some reason (which I hope someone knows why) my computer started to not stay sleeping. I would go to the apple menu, select sleep, the screen goes dark but then a few seconds later the screen comes back on. I haven't changed any preferences so not sure why it's doing this.
Lion makes the sleep process take a while. But after a short time my Mac Pro wakes from sleep and even though I have it set up to go back to sleep after five minutes of inactivity it never goes back to sleep. This wasn't a problem with the first version of Lion.
Info:Mac Pro, Mac OS X (10.7.3), DP 2.7GHz Early 2009
So I am one of those guys that keep my desk in the same room I sleep, but can�t stand light of any kind while I am sleeping ( I know this will eventually be a hardship for me sometime, somewhere) .
Sure I know I could just move my desk out of the room and avoid this issue but I would like your input.
I like to leave my Mac book on and open with an external display always plugged in. I do not want to shut down or put it to sleep as I want it to be available 24/7 for some type of remote access. I currently have my display set to sleep after one minute with a hot corner to activate (running on 10.6.2) however at random the displays will wake and thus cause this light eyed sleeper to also wake. I can defeat this partially by killing power to one monitor every night but there is nothing I can do about the internal display short of turning down the backlight. I have wake for Ethernet disabled. Can anyone tell me, how can I do what I need to do? What type of background events cause the display to wake and why? And how if at all, can I stop them from doing this? I just want to only be able to wake the display from suspend or power save when I press a key on an attached keyboard.
I have a first gen Mac Pro with a 20" Apple Cinema Display connected to it. I always leave my computer in, but I let my display sleep. My display will go to sleep fine but it will wake up randomly and then fall back asleep again after the time interval. This has been going on for a long time but it's starting to really bother me.
Just wondering if anyone else is having a problem with their i7 not staying asleep. worked wonderfully until the firmware update but not clear if that had anything to do with the change.
tried everything so far, from shutting down the magic mouse to unclicking network wake on demand.....no change...
Bought a new iMac in January, have a problem with the screen saver not coming on automatically after working okay for maybe three or four days. Have had about six calls and spent many hours with Apple techs. We get things working and then after a few days the hot corners won't hold, the screen saver won't come on automatically and the computer doesn't go to sleep as set up. If I manually put it to sleep it doesn't stay asleep for very long. Shutting down or a safe boot, will make it work right again.
Info: iMac (21.5-inch Mid 2011), Mac OS X (10.7.3), miss the number pad
I've had my G5 for a couple years. I keep it under my desk, so I don't hear much from it, but I have noticed that the hard drive is constantly spinning. It's been doing it for as long as I can remember. Any ideas why, and whether I should expect a failure because of it?
I just got a new Mac Mini, and I notice that when it's in sleep mode, the hard disk is constantly spinning up and then spinning down again. It spins down roughly every thirty seconds, the power light starts blinking in the "I'm sleeping" pattern, but then the drive spins back up in a matter of seconds and the light is on constantly until the next spin-down. I've tried turning off the network, disconnecting the display, fiddling with the Energy Saver settings, quitting all programs, all to no avail. All updates are installed.
When my iMac 27" is in sleep mode I have noticed that the hard drive spins up very regularly every 4 or 5 minutes. Also when placed in sleep, the monitor takes about 30 seconds to go black. It also wakes on its own for no apparent reason. No new software has been added, only normal updates, running Lion. Time machine backup is done every couple weeks.
I replaced my hard drive at the weekend in a mid 2010 MacBook Pro with a Samsung/Seagate 1TB 2.5 inch 5400RPM SATA II Hard Disk Drive. The install of the hardware went fine, and the computer recognised it no problem. I went through the process of formatting which again went ok, then I moved on to the restore of the old image from my time machine.
After the 4 hours or so it said restore successful and a restart was required - after the restart I am presented with the apple logo and spinning wheel and can make no progress beyond this point.
I have tried 3 restores now - all of which were 'successful' and have the same issue. I have checked the disk using the repair tool and there are no recoded issues so I'm at a loss.
Basically I have a 750GB hard drive in my Macbook Pro and over 300GB is taken up with 'BackUp' data. This is more than the total of everything I have on the drive other than that. Time Machine has always been setup on an external drive and when searching all files on the Macbook there is nothing for backup files so don't know where it is coming from.
Whenever I set my imessage picture it'll stay as long as I have the program up, but once I quit imessage and pull it back up, the picture has disappeared back to the default icon (of a blank person).
I was trying to set up my Time Machine to an external hard drive. I didn't continue because it asked to "initialize" the hard drive which I had a lot of important things on.
I have another external hard drive I'd like to use but, my Time Machine has this error code of -43. What is this and how can I use my Time Machine on another external hard drive?
I upgraded the stock 160GB 5400RPM HDD in my MBP to a WD 320GB 5400RPM drive, and I restored using Time Machine. Now it takes a while (around 10-20 seconds) to bring up an Apple logo when I boot the machine.
I have an external hard drive and use it for Time Machine. I have used 401GB out of 465 and want to clear out the 401GB so it will continue to save the latest and greatest on my Mac?
I am not too tech savvy....Am I supposed to keep the external HD plugged in 24/7 in order for Time Machine to work? Is it going to damage the HD if it's constantly being plugged in?
I have a MacBook and will be purchasing an external harddrive to backup all my info from OS X. I also have a partition on the drive in the MacBook for windows and would like to use the external as a backup for that as well. Do I have to format the external and partition to backup each OS? I am new to the whole backup of info with an external harddrive.
Right now I have an i5 MacBook Pro with a 320 GB hard drive. I want to move that hard drive to my Time Capsule via a USB enclosure and use a 60 GB OCZ SSD hard drive in my MacBook. Do you think this is a good idea speed-wise? Also, does anyone have any experience with using iTunes or viewing videos with a hard drive plugged into a Time Capsule that's a few rooms away? I'm probably only going to use the wireless hard drive to listen to music and maybe move files to it once in a while. Would that be too slow? I would unplug it from the Time Capsule and plug it into my Mac to transfer big files or install software that's on the external drive.
