IMac :: Monitor Just Suddenly Turned Bright Green?
May 21, 2007
Is something like this decumented? I can still see everything on the screen, it's just extremely tinted green, and it's like that since the moment it boots up, even the first grey startup screen is green. I've tried calibrating
I'm looking for a external monitor that is compairable in brightness as my iMac's screen. The brand needs to be Samsung, and the look of the Samsung moniter I would prefer to look like the examples below. Why? Because I want it to match my TV. I'm also looking for a small monitor because the space I have is pretty small and I dont want to have to move my iMac and look at it at a angle. I currently have a Samsung SyncMaster 906BW with a 1440 x 900 60hz resolution and its VERY dull compared to my iMac and its at 100% brightness and 85% contrast. Here are some of the screens I'm looking at so far, would they be close to as bright as my iMac's screen?
I have an iMac8,1 24". While working on the iMac, the screen turned complety green. After a restart, the screen was back to normal. What could cause this? Should I be concerned?Â
Like the title says; my dad's vision is getting progressively worse, so I'm looking to fix him up with a ridiculously bright, preferably very large monitor. He likes photography, so at least moderate color accuracy would be nice (video performance is completely irrelevant), but is secondary, since if he can't see it it doesn't much matter how good the color is. Not ridiculously expensive, also nice.
I can, of course, go sort monitors at Newegg by brightness and pick the highest one, but if some of the online tests are to be believed, the specced brightness isn't necessarily accurate, and that doesn't tell the story if it looks like complete crap otherwise.
On paper the Hanns�G HG-281DPB is ridiculous in brightness and size, but it's basically a TV (HDMI-only); I like ViewSonic and Samsung, but on paper most of their screens aren't notably bright.
Partition Map Scheme : Unformatted Disk Identifier : disk1 Media Name : WD Media Media Type : Generic Connection Bus : USB USB Serial Number : 202020202020202020202020 Device Tree : IODeviceTree:/PCI0@0/EHC2@6,1 Writable : Yes Ejectable : Yes Location : External Total Capacity : 2.2 TB (2,199,023,255,552 Bytes) S.M.A.R.T. Status : Not Supported Disk Number : 1 Partition Number : 0
I have stuff on it that I'd rather not lose, any advice
My MacBook suddenly turned off. There was a click sound and then nothing. I have tried to restart it but nothing happens. No sound no lights. It is plugged in and the power cord shows green. I have not damaged it in any way.....
I have been using the latest macbook pro 13.3" since April 2010. Over the last week the monitor suddenly goes completely white and the external monitor goes black. The laptop becomes unresponsive although the programmes opened continue running (e.g a skype voice call would continue without interruption although the monitor is all white).
The only solution at the moment is to press the turn off button for a few seconds then switch the laptop on again. It will then work normally until for no apparent reason this happens again.
My iMac desktop (purchased new in 2009) suddenly turned off this morning and won't respond to the power button even after the attempted SMH (right acronym?) reset.
My Mac is about year and half old, recently it would stop charging here and there, and I had booked in at mac store, they kinda fixed it and I had to buy a new adapter, and it worked like a week, this morning it just suddenly stop charging again! The light is not on, no green or red light, I don't know what to do..
i had the macbook Core 2 Duo for About 8 months and it was working great.yesterday i left a file download in firefox for 5 hours then went back to check on it , it was working FINE, Then i got Back after 2 minutes and the screen is suddenly white and not showing anything!i shut down the laptop and restarted , there was a chime and just white screen...i connected the laptop to an external monitor AND EVERYTHING IS WORKING on the external screen but the laptop screen is white!!!i tried resetting the PRAM and i tried resetting the SMC twice but nothing Changed
i have got my macbook pro with a Acer G245H HD LCD screen connected via DVI cable. Just this morning i woke up plugged my macbook in turn it all on and on my moniter there all lots of green dots flickering everywhere.
Have a late 09 i7 27" iMac with XP SP3 installed on Bootcamp partition. Even after turning down brightness in BootCamp control panel all the way down, I still feel like I'm staring at the sun. Screen is still way too bright. No such issue in OS X. Is there any Windows app (similar to Shades) that allows further brightness reduction? With brightness as is, Bootcamp is pretty much unusable to me.
Right now I'm in a dark room and it's really hurting my eyes because of the brightness. Is there an app or something that can make the screen get even dimmer/brighter?
i had the macbook Core 2 Duo for About 8 months and it was working great. yesterday i left a file download in firefox for 5 hours then went back to check on it , it was working FINE, Then i got Back after 2 minutes and the screen is suddenly white and not showing anything i shut down the laptop and restarted , there was a chime and just white screen...i connected the laptop to an external monitor AND EVERYTHING IS WORKING on the external screen but the laptop screen is white!
I've got a 2006 17" iMac (serial # starts with QP) and it's developed several bright, vertical lines on the display. Been reading around and it appears that this is not an uncommon problem. Whether this is something that can be repaired.
My father owns one of the original G5s, so its power pc not intel. Today while browsing an excel spreadsheet he says part of the screen turned black, then the monitor shut off, then the monitor came back on but not video. Mean while the fans started spinning out of control. Now when he tries to turn it on, he gets power, but all that happens is the fans spinning faster and faster and faster until he turns it off. No video or anything. Just speeding fans. He fears the CPUs died since they control the fans. Any suggestions? He also says the fans were spinning unusually fast these last few days.
I just bought a Samsung XL2370 monitor to hook onto my MBP 15".
Problem: the image is pixelated and blurry green. I can slightly see the background though. Screen works fine on a Windows pc. Before I hooked up a 19" on my MBP and that also worked.
I tried the menu but no luck. And when I choose the auto adjustment a message appears 'not available'.
I have the early 2008 Mac Pro, standard configuration. I run a 30" ACD and recently added a second monitor. Ever since then I have been hearing this faint whirring sound, as if something in the machine is starting/reving up and then whirring down. It's audible to me because I have my machine sitting on top of a pedestal desk right beside my table. Does running two monitors make something inside, maybe a fan, run wierd? Could it be the fan of the video card? I am just curious, as I had not heard the sound before when I was running just one monitor. Oh, and the second monitor in question is a Wacom Cintiq. Video card is the stock ATI Radeon HD 2600 XT. I dare not open the side panel when the machine is running to check what's causing it lest I mess something up. It's like, rrrrrrrrrrrrr, rrrrrrr, rrrrrrrrrrr, like a miniature reving sound. LOL, that's the best I can do to imitate the sound. It's as audible as the sound of the regular fans.
Very suddenly my dock has disappeared, (and occasionally reappears), and is now completely non-useable. Why..?
I have created other accounts on my computer previously and the dock on those is fine...I have looked in Activity monitor and it flashes on and then disappears in there. I tried using terminal to 'killall Dock', but this did nothing...Am using Leopard on Alu iMac.
I have a 27" iMac and I'm using Samsung SyncMaster SA850 as a second monitor (connected via a display Port cable with a mini Display Port adapter). Everything worked fine until yesterday - the Samsung screen turned black and now it only works with max resolution 1280 x 1024 (native is 2440x1440). I think I upgraded Lion 10.7.2 to 10.7.3 (I don't remember for sure though). When I connect the monitor to an iMac with 10.7.2 everything works fine. And another iMac with 10.7.3 has the same problem as me.
Just got a refurbished 27" Imac I5 with the Radeon 4850 yesterday.This happened twice yesterday, so today, when I powered on I had my blackberry ready to record.As you can see theres a large green band (yesterday it was accompanied with a red one) that spans the vertical aspect of the screen. The bars disappear after 30-1min.I've tried searching and haven't found anyone with a similar problem. http://www.youtube.com/watch?v=mGK3LYb23mc
I have my laptop hooked to my TV so I can watch shows on the internet. The screens were independent until my cat walked on the keyboard and now the two are showing the same screen.  How do I change it back?
I was surprised one day to find an inch of white line running from top to bottom on my screen. Then after a week it expanded to two inches white line, then suddenly it turned all black and I can't see two inches of my screen from the right edge. I was reading some forums and found out that I can use a dell monitor as a secondary monitor, but is it possible to use the dell monitor as the primary monitor in case the black line will spread throughout the entire iMac screen? so the iMac would serve as a stand alone processor like a regular desktop?
I have a 2007 imac and my esc button does not work. I was watching a video on full screen but the vid had no option to exit full screen so i jus kinda went crazzzzzy on the keyboard and my screen turned FLUORESCENT..wtf? i restarted, rebooted, shut down but still having the issue.
A couple of nights ago, my iMac randomly turned on in the middle of the night, so I held the back power button to shut it off. Later that morning, I tried to turn it on and was left with this screen (see attachment). I was very confused. After trying to boot into target mode, safe mode, the assorted...I restored the computer. It seems to work fine now, but I'm still wondering...what the happened?