Have a late 09 i7 27" iMac with XP SP3 installed on Bootcamp partition. Even after turning down brightness in BootCamp control panel all the way down, I still feel like I'm staring at the sun. Screen is still way too bright. No such issue in OS X. Is there any Windows app (similar to Shades) that allows further brightness reduction? With brightness as is, Bootcamp is pretty much unusable to me.
View 14 RepliesRight now I'm in a dark room and it's really hurting my eyes because of the brightness. Is there an app or something that can make the screen get even dimmer/brighter?
View 24 Replies View RelatedI'm looking for a external monitor that is compairable in brightness as my iMac's screen. The brand needs to be Samsung, and the look of the Samsung moniter I would prefer to look like the examples below. Why? Because I want it to match my TV. I'm also looking for a small monitor because the space I have is pretty small and I dont want to have to move my iMac and look at it at a angle. I currently have a Samsung SyncMaster 906BW with a 1440 x 900 60hz resolution and its VERY dull compared to my iMac and its at 100% brightness and 85% contrast. Here are some of the screens I'm looking at so far, would they be close to as bright as my iMac's screen?
View 1 Replies View RelatedI remove the boot camp partition by using the disk utility. Removing the partition resulted in a gray space, that couldn't be used by the Macintosh HD partition. I tried to merge them together, but after working a while the disk utility keeps giving me an error message. I'm not very good at explaining, so take a look at the pictures below. First off i start up the disk utility: Then i rezise the Macintosh HD partition: And then i try to partionate, and after about 5 min an error message pops up: I have no clue how to solve this one.
View 7 Replies View RelatedI Have a 17' iMac 2006 It has had lines in it for a while and i have called Apple Support and they have not helped me at all and no my entire screen has went out it makes it impossible to do anything I am having to try to use my dads Macbook to do my College homework?
Info:
iMac (17-inch Late 2006), Mac OS X (10.7.4), With crapy screen lines
I desperately seek help from the community as Apple itself doesn't seem to care much.After updating to 10.7.4 my Imac has become unusable. It goes into a loading state just about every 10 minutes at which i can do little more than move the mouse around. I know it is the new update causing this (and not the hardware) because i also have a Bootcamp partition which works totally fine. Does anyone have any advice or solutions? Unfortunately i am currently not in the position to reinstall my system. I have no more space on my external HD to back up everything and am not in the position to purchase a new hard drive. And in my opinion, i shouldn't have to resort to such drastic measures because Apple released such a terrible update.
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.4)
I have a macbook air in my household (it is not my laptop, but i bought it for my wife) and I am having a couple of issues.
1) occasionally, hard to reproduce, it looks like some of the LEDs at the bottom of the screen are going out. they alternate in a very specific dark light pattern. This started up a couple weeks ago
2) now the keyboard has now become unusable as the number keys are permanently shifted into !@#$% instead of 12345. The keys are not sticky or anything, and there does not appear to be any liquid damage, but then again, i am not the primary user of this laptop so who really knows.
Does any of this sound like something covered under warranty? Are there any water damage indicators i can check to see if damage was caused by this?
I have a new MBA, 13" which I'm loving so far. I like the screen bright - like almost all the way up all the time. Other than shortening my battery life, will this setting cause any damage to the screen?
View 5 Replies View RelatedFor me the screen is too bight even after dimming it all the way down. Is there a way to make it even dimmer?
View 24 Replies View RelatedI've had bright spots appear behind my LCD screen for the second time this last month.
They look like the LEDS from the backlight are pushed up too close to the LCD and sort of washout the LCD in that area. The have occurred on the left side and the right sides along the lower edges of the screen.
I'm fed up with all the repairs this laptop has needed and feeling that I paid 2000 dollars for a quality product I went to the apple store today and asked for a replacement unit.
I was told that the recurring bright spots (on top of 3 other minor repairs and 1 major repair) did not warrant a replacement unit. The manager even said that they shouldn't have fixed this problem last time because it is cosmetic and not covered by the warranty. The genius also repeated the phase "This doesn't happen by itself" (I nice way to say I did this and that they shouldn't cover it. )
The manager decided to make me feel special and say something along the lines "We'll fix it again this time because we did last time".
My warranty is running out in 6 months and I need to know what's causing this. I always transport my laptop in an incase sleeve with a shoulder strap. There have never been any external marks on my casing when these dots appear. If I put too much pressure on the screen wouldn't the middle bend in more and I would get problems there? There weren't even marks on the screen from the keyboard keys yet I put enough pressure on it to cause this without even knowing it?
The best part is I asked the man who gave me my repaired laptop back how to prevent what the manager called 'LCD bruising'. When I mentioned bright spots he said 'Oh that's a defect we cover under warranty'.
Im going to contact apple's customer relations on monday regarding the repeated repair trips. I have no confidence this laptop can go a long period of time without needing repairs.
It's not the keyboard sticking.
Info:
iMac, Mac OS X (10.5.8)
Why does my screen look dull? It's not dull like when you stop charging it, nor is it as bright as when it is charging, it's about in between. I have it plugged in and the battery constantly reads 95% never 100%. The little green dot is on the charger input and the battery symbol shows that it is being charged so I know it's charging. What reason would be why my screen is not as bright as before?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
I bought a MBP last weekend, and noticed in the last few days a few bright "spots" on the screen in the top left hand area of the screen. It's like the complete opposite of a dead pixel - it's just bright and whitish. It's almost like a speck of glitter on the screen! It's only visable from certain angles, but is one of those annoying little things!
View 1 Replies View RelatedMy laptop screen keeps intermittently and frequently getting brighter and dimmer and my manual buttons to alter the screen brightness aren't working. What can I do?
Info:
MacBook Pro
I have some serious problems with my iMac that I've been experiencing for a long time now, but they're really getting on my nerves now!
I have a 2006 20" iMac (the last revision of the white ones before the aluminum redesign), 2.16 GHz, 2 GB ram, 250 gig hard, 128MB ATI X1600 Mobility.
I have an aluminum macbook 2.0 if it helps but I have a question. I have my macbook at full screen brightness but aren't you suppose to get even more brightness like another level when you connect the ac and my birghtness doesn't even move. Also I feel my macbook screen is not as bright as it used to be any way to make it brighter or may I have just get used to my macbook?
View 15 Replies View RelatedJust installed windows 7 on my imac, the only problem is that at the lowest brightness (set via keyboard and boot camp utility) the screen is too far bright!! Is there a way to low brightness via software?
View 4 Replies View RelatedI just got a new MBP 15 i5 2010 with a high-res anti-glare screen.
Manufacturer: 00000610
Model: 00009CBB
Serial Number: 00000000
Manufacture Date: 00000000
Unfortunately the display doesn't show very light colors. (compared to my old MBP15 2007) If you look at the attached image [URL]
- at section 5 I can only see the Grey boxes from 235 to 247, and I CAN'T see any Grey box from 249 to 253.
- at section 3 I can't see the Grey box at 5 all the other from 10 to 50 are fine.
Changing the brightness, playing around with different color profiles and resetting the system didn't solve this problem. I called Apple support and after some resets I was asked to compare my screen with the same make/year. Does anybody has the same 2010 MBP15 high-res anti-glare display and experiencing the same issue? Does your display work fine and is showing all the different Grey boxes?Other MBP owners: Can you see all Grey boxes on your MBP screen? My brothers 2009 MBP15 is showing all light Grey boxes from 235 to 251. 253 can't be seen
My IMac screen keeps changing brightness as I use it, currently the LHS of the screen is not as bright as the right. Â
Does this sound like an adjustment or a fault? The sytem is about 6 months old from new.
Info:
iMac, Mac OS X (10.7.3)
My iMac's screen brightness started to fluctuate a few days ago, dimming / getting brighter. There's no ambient light sensor (as far as I can tell) on the iMac.
Info:
iMac, Mac OS X (10.7.2)
Has anybody seen this on their Macbook Air? A very bright, fading line of 6-8 mm at the top of the screen? I just returned my MBA because of this a couple of day ago. Then today I go to the local apple dealer (in Denmark) and I see the exact same bright line on the MBA screen in the shop. I also checked a unibody Macbook, a white Macbook, and an 24" iMac. None of these screens had the problem - it was only the Air. So now I wonder: is this a feature of the MBA, or was I right in returning it because of this.
View 1 Replies View RelatedI just bought a 12" powerbook from craigslist. The guy I bought it from powered it up outside in the sunlight so I didn't notice until I drove an hour home and booted it up. The bottom of the screen towards the very center is extremely bright compared to the rest of the screen. I discovered that if I push on the bezel right below the LCD, the screen normalizes. However, I can't see anything that looks bent, dented, or cracked anywhere on the screen, bezel, or back of the LCD.
View 7 Replies View RelatedI just noticed that on a black background, my 17" i7 MacBook Pro has two areas in the lower middle area of the screen, where the backlight is too bright compared to the rest of the screen. It is very noticeable on a black background and grey.. Is anyone else having this problem?
Other things I noticed:
- there was dust on the plastic cover that you take off the case when you use it for the first time
- the aluminium enclosure was slightly dirty, could be rubbed off though..
- there are two minor 'impurities' in the aluminium (?!).. two tiny grey spots/blemishes basically
- there were a few minor scratches on the aluminium casing.
- the apple logo at the back glows in a much warmer (yellow-ish) colour than the previous generation mbp (?!)
- the screen seems not as bright as the previous generation
- the keyboard backlight seems not as bright as the previous generation
I have just upgraded my iMac from snow leopard to Lion and now it is running incredibly slowly to the point of almost unusable.
Info:
iMac, Mac OS X (10.7.4)
Is something like this decumented? I can still see everything on the screen, it's just extremely tinted green, and it's like that since the moment it boots up, even the first grey startup screen is green. I've tried calibrating
View 24 Replies View RelatedI've got a 2006 17" iMac (serial # starts with QP) and it's developed several bright, vertical lines on the display. Been reading around and it appears that this is not an uncommon problem. Whether this is something that can be repaired.
Info:
iMac, 17" - Manufactured August 2006
I decided I was going to install XP on a bootcamp partition tonight and everything went fine until I installed the Bootcamp 3 software. After installing the Bootcamp drivers the machine rebooted and I ended up with a black screen in Windows. I did hear the XP welcome music so I figured it was a display driver issue. I rebooted into safe mode and deleted the ATI 4850 driver and restarted. After removing the bootcamp driver everything was normal again other than the fact that I only had the default Windows drivers running.
What am I doing wrong? I installed XP off of an XP disc with SP2 already on it and ran the Bootcamp install off the Snow Leopard disc. Finally, not sure if this matters, I am running one of the new i7 iMacs.
I tried to install Windows 7 via Bootcamp a couple weeks back, but shortly after it failed, I deleted the Bootcamp partition in Bootcamp Assistant. However, whenever I want to boot my computer, it tries to go into the Windows Installation, but it gets stuck on the flashing underscore on the top left of the black screen. Henceforth, whenever I want to boot into OSX, I have to hold down both ALT keys. is there any way of fixing this so the iMac boots STRAIGHT into OSX (like normally)
View 2 Replies View RelatediMac 27" i7 with OS X v 10.6.x when I create the bootcamp partition for windows 7 and I install from my original DVD of Windows 7. I format the partition during the install of windows 7 and on the first reboot after windows 7 first part of the install, the screen shows the Windows 7 logo and says continuing installation and then a black screen and then nothing.
I have to hard power off the iMac and then it starts over says the thing about the system didn't shut down properly and gives me the option to start safe mode etc. and does the same thing each time.
im on a goal to resize my bootcamp partition... im running 10.6.4 with Win7 in Bootcamp... i made a mistake of only making a 80GB partition for windows 7.... now i want to make it bigger, i have read up on a number of methods but most are outdated and users report issues with windows 7 and SL so i'm a lil stuck... this is my idea
I have 120GB unused HDD space atm so could i.. back up my 80GB partition to a DMG with disk utility then delete the old partition making the whole 200GB unallocated space... then use the bootcamp utility to re occupy the space then use disk utilities restore option to restore the image of the 80GB to the new 200GB partition... would this work? if not has anyone got any other methods to use with 10.6.4 SL and Win7?
