Upon starting My Intel iMac, it stops at the Apple logo. I have restarted it several times and tried to hold down the "r" key while starting to enter the restore mode...nothing but the Apple logo. OSX 10.7.5
View 8 RepliesMy daughter's 3 year old MacBook Pro will not boot up. The grey screen with Apple logo comes up and it looks and sounds like it is going to boot up but after 30 seconds it goes black and turns off.Â
Info:
MacBook Pro (15-inch Early 2011), iOS 5.0.1
Pretty smooth sailing until I had to reboot my mac pro. It just stops at the point where you have the grey Apple logo and the spinner.
I have a G5 iMac - 2.1 ghz, 20", 250gb hd and 3gb ram, but it has been having problems starting up and it is also going to sleep midway through a task or at random times totally unprompted.
It now almost never starts up first time (I keep the iMac mains power lead always connected and the mains electricity supply turned on at all times now)- sometimes I will get the 'Start-up Chime' and then the cooling fans start spinning very loudly and then after a few seconds the iMac stops the start-up routine, but often when I try to start-up I don't even get the 'Start-up Chime' and I have to leave it for some time before trying again.
I can also now only get the iMac to run as a Firewire Target Disc by starting up with the T key held down and then using an old G4 (400mhz) Powerbook Titanium as the screen/keyboard by using the iMac HD as the startup disc for the Powerbook but this is obviously just a temporary work around.
I have also tried backing up all my data, and reinstalling the Mac OS X onto the iMac but the iMac still will not start-up normal and I still have to use it just as a Firewire HD.
I am fixing this 2007 iMac for free for an autistic child. Apparently, changing computers for someone that is autistic isn't ideal. I don't have the history with this iMac, just that it isn't working. They supposedly did have the hard drive replaced? It sounds like a dvd is inside it when it starts up, could be the installation dvd?Either way, I have not seen it before where the Apple logo refuses to show on the start up screen. It just stays gray. Â
1. I've tried zapping the PRAM. Didn't have any changes.Â
2. I tried starting up in safe mode, but getting passed the apple logo is required for thatÂ
3. I tried single user mode, but getting passed the apple logo is required for thatÂ
4. I tried holding the c key to start up off of the dvd, nothing happensÂ
5. I tried holding the mouse button (and cmd, opt, f, o) to manually eject the dvd during start-up.Â
Info:
iMac, Mac OS X (10.6.8)
iMac Intel G5 stuck at apple logo.
Info:
iMac, Mac OS X (10.6.8)
Today just woke up and turned on my iMac. It started with apple logo then I saw a cancel logo which shocked me..
View 10 Replies View RelatedUpon start up my screen goes to normal gray w/apple logo and spinner then goes black. Cursor is visible and still is moveable but nothing else. I safe booted and bar came up also but then back to black screen.Â
Info:
iMac, Mavericks upgrade
Why is my Snow Leopard OSX 10.6.8 IMac screen all white when I turn it on? There is no spiral and no Apple logo and the desktop does not appear. The screen is just white. Â
Prior to this, we had a wind storm in our area with some power glitches today. After one of them, the dock items disappeared and just the wallpaper was there. The colored spinner began going around when I clicked on the mouse but nothing was happening.  I unplugged it to try to reset it, but now the screen comes up all white, there's no apple logo that appears at start up and that's it. Now what should I do?
Info:
iMac, Mac OS X (10.6.8)
I purchased a new late 2013 27 inch iMac 3.4Ghz i5. The only thing I did after pulling it out of the box was restore Time Machine from my previous iMac. On startup the machine boots as expected, but gets interrupted by the screen turning a dark blue, and the apple logo turning bright red, for about a second or so, then boots as normal, and opens Mavericks. I've spoken to Applecare - they suggested I re-install Mavericks, which I did. The problem is still there. I've done a hardware diagnostics test - no problems. Though I wonder if it could be a faulty graphics card? As far as I'm aware there are no other issues with the iMac. The machine is under warranty but would love to solve this if possible.
View 1 Replies View RelatedI own a 17" iMac Core 2 Duo. It has been crashing more and more lately. Now when I turn it on, it sits at the apple logo. The spinner does not appear. I tried new sticks of ram, and same thing. I can boot off a windows or Linux cd with the c key, but they freeze halfway through bootup. I ran a hard disk check also.
I shut the computer off like i normally do. It was fine and well. Went to turn it on, and saw a bar. Whats it for? Its been moving, but very slowly. It never does this. Is there malware or something causing it? I had a movie on the DVD slot, it that caused it. It wasn't spinning though.
View 8 Replies View RelatedMy circa 2006 Intel-processor iMac does not get beyond the white screen with the Apple logo and the spinning wheel when I power it on. As per other support documents (Article: HT1533; discussion "Mac doesn't boot") I have tried and SMC reset, all of the keyboard controlled reboot options (with no response - and now a disc is stuck in the optical drive), reset the RAM, etc. Apart from taking it to my trusty local Apple store
Info:
iMac, Mac OS X (10.6.8), Part of an Apple home/business net.
my iMac doesn't startup, it stops in the grey apple and the spinning gear !!!
Info:
iMac, Mac OS X (10.6.8)
my Imac will not start - When I try to start it I just get to see the apple and the wheel that goes around and around
Info:
iMac, iOS 4.3
I have Time Capsule and everything is backed up on there. My data is on a separate USB HD + Drobo, but for now I need my iMac to boot but it won't. It won't even get into the Desktop. all the guides online says double click the Install Icon this and that...I would if I can get into the Desktop !
It is just stuck on the Apple Logo screen with the spinny thing, that stops spinning!
when i start my imac it shows the apple logo, then the circle starts spinning and after a couple minutes it just shuts off. BTW i have windows on it as well so when i hold option it lets me open windows but not os
View 8 Replies View RelatedI was working in my iMac - OSX 10.5.8 and i believe i did something wrong. I started seeing 2 restart / shutdown/ force quit links on the apple menu.
View 4 Replies View RelatedHoping someone can help - my imac (approx 15-18 months old , intel) won't start.
Last night on shutting down DPP (canon Digital image software) was hanging and system asked me if I wanted to force quit it...sadly I had switched off my bluetooth mouse and , as usually once mouse turned off switching it back on it never re connects - why did I buy the bletooth mouse and keyboard ?, so I could not confirm yes force quit - is there no way of selecting with keyboard like there is in windows ?
So I switched off at power switch. Tried to re switch on - grey screen came up, apple logo, the little timer circle but after a while timer circle stopped and nothing further happened.
have tried several more times and now don't even get timer.
I had been using my iMac all night, when all of a sudden the bouncing beach ball appeared and everything became unresponsive, apart from the mouse cursor itself. It might be worth noting that a few hours prior to this, I plugged in an external hard drive to burn off a DVD. This external hard drive has two partitions, the first being a restored image of Leopard; and the second, my out of date backup ("yes, I know").
I subsequently restarted my machine, enjoyed the chime, pondered the excessively long start up and looked bemused at the Leopard Setup wizard. I realised that the restored Leopard partition had booted up instead of the internal disc. So, I unplugged the external drive, pressed reset on the iMac and was immediately greeted first by the reassuring chime, then by the Apple logo and a lingering grey screen and finally by a flashing dark folder icon with a question mark in the centre for eternity.
I tried rebooting a few more times. Same. I've been frantically Googling but only found the PRAM reset and a very frightening iMac disassembly guide. I've tried plugging the external drive back it, but it refuses to boot Leopard from that now. What can I do? I feel so helpless on a Mac, on a PC I'd at least be able to open the sucker up before panicking! I've been working on a client's flash web dev project for months, and not made a back up in about half that time. The website is supposed to be going live tomorrow! Luckily I have the site uploaded, but the entire source code is potentially lost, so in the long term this is a major catastrophe!
Came home from work the other day and my iMac (20" iMac from '07 / Snow Leopard) was frozen, did a hard restart and it booted up fine without much of a problem. Everything was running very sluggish so I began to verify the disc through utilities at which point it froze again, now whenever I restart I get stuck at a white screen with apple logo and something spinning underneath it. The longest I've let it sit at that screen is about an hour or so, it gets extremely hot though so I'm hesitant to leave it any longer.
I've tried a few suggestions already, safe mode with no luck, disc target onto my macbook with no luck and I've tried "/sbin/fsck/ -fy" at the command prompt which returns something along the lines of Harddrive can not be repaired. The most important thing to me right now is being able to access some of the files on there if it is not a total loss. I've back up about 2 months ago, so it wont be a total loss, but like I said, would prefer to salvage anything I can.
My 3-month old iMac was responding very slowly when I used the latest version of Safari. So I forced quit the program. From then on, whenever I turned on the iMac, it would get stuck at the Apple logo start up screen. I had to unplug the power since the machine is getting very hot after 15 mins.
View 3 Replies View Relatedi need some help regarding my iMac. I was busy installing combo update 10.5.8 on my iMac when the power in the entire house went down due to the snow. When I started my iMac back up it got stuck on the apple logo with the spinning wheel below it. I can leave it there for as long as i like nothing happens. I had the idea to reboot using the CD's i got with the iMac but there is already a disc in the discloader so i can't put the reboot CD's in. anybody know how i can get my iMac to work again? There aren't any files on the computer that i neccesarely need but if i would be able to save my photo's etc. it would be great.
This situation began when I put my Imac on sleep. After, the screen turned on in black whit the cursor but I couldn't do anything.
Then to rebooted the machine, the apple logo and sound began fine but the screen turned off, so moving the mouse the screen turned on in black with cursor.Â
I'd tried many ways, resetting the PRAM, SMC, repairing the disk and permission, analyzing hardware, repairing fsck files.
Suddenly, when I entered in Verbose mode, mi imac brought into user choose screen and worked fine, but when I shut down and tried to start my mac in the next day, it didn´t work again.Â
Info:
iMac, OS X Mavericks (10.9.3)
My iMac will not start up, the apple comes up and the wheel goes round but then I am left with a blank white screen.
Info:
iMac, Mac OS X (10.6.8)
My 24 inch iMac is not getting pass the apple logo. It acts like it's loading, but then the little progress spinner (not sure of the name) stops spinning after 2-3 minutes. It never wants to get pass that. I'm running the latest version of Lion.
Here's the specs:
3.06GHZ
4GB
500GB
NVIDIA GeForce 8800 GS
So far I've tried using disc utility on my snow leopard disc....it doesn't load. I've tried to start in safe mode...it loads about half way and stops. Oddly enough windows xp works in bootcamp. It runs okay besides when I try to move windows. I'm guessing it's the graphics card. No idea really. Here is a video I made to show you what I mean: [URL]. I've also tried installing a new 1TB HD and it still won't boot from a disc for some reason. I tried install snow leopard through the internal superdrive and with an external superdrive. No dice.
Info:
iMac, Mac OS X (10.1.x)
IT does this every time, but when I do command and r or other such keyboard commands, it goes I the recovery pahe with no problem. Whenever I tried erasing the iMac to reset it, it said the disk was locked.
Info:
iMac, OS X Mountain Lion (10.8.5), April 2008 model
I just tried to upgrade my iMac to snow leopard (10.6.3) from cd.It remains stuck on the start page since hours : white page with grey apple logo and no spinning wheel or progression bar.Â
Info:
iMac
did a quick search on Apple, and here but didn't turn up much of anything useful. I've got a friend with an iMac that won't boot up. Pressing the power button doesn't seem to do much of anything. I've tried unplugging the power cord, and re-plugging it, but alas, I got the fan to rev up for a second and then blahh, nothing again. It's a 20" model with the black bezel. Not entirely sure of the system specs, I only got a couple minutes with it last night. Do these machines have any common problems like this?
View 10 Replies View RelatedMy iMac (27", late 2013, Yosemite) starts using the power button. A black screen, white Apple logo and progress bar appear. When progress is at ca. 50% the computer powers off.
Info:
iMac, OS X Yosemite (10.10.1)
