I've swapped my iMac's optical drive twice since it originally failed three months out of warranty. My first replacement was a UJ-875. My latest replacement was a UJ-225 Blu-ray reader. Here's the thing:
When attempting to insert discs, both drives failed to "grab" it and pull it into the iMac. The bezel of the iMac is so thick that I would lose the disc inside without the optical drive actually taking hold and loading the disc. With the tip of a pen I was able to push the disc in another few millimeters and it would grab and load up without issue. Both drives functioned flawlessly once I got the disc in there.
So...What is Apple doing to customize their drives so that they "grab" earlier rather than later? Is this a mechanical adjustment that can be made on the optical drive? I'm rather surprised that I've been unable to find anything like this on the web.
I ordered a 2.93 i7 / 8Gb Ram / SSD + 2TB from the Apple Singapore online store and received it yesterday. Shipping info showed that it originated from Shanghai China.
As soon as I opened the box and took the imac out, this is what I found: on the lower left corner of the black glass (not on the screen but on the bezel that surrounds the screen) , was a small silver bubble like crack inside the glass. At first I thought it was a stain and tried to rub it off but quickly realized that it was inside the glass.
On further inspection, I found that the entire black glass at the bottom corner was protruding slightly out while on the right side the glass was slightly protruding in.
Obviously a manufacturing defect.
I was also very surprised to see the general condition of the unit that was supposed to be brand new and pristine - it looked like there were smudges on the glass in various places, dust on the outside and tiny black spots on the aluminum. Most disturbing was that the thin plastic that is stuck on and covers the pedestal for shipping was partially unstuck - like it had been peeled of earlier and then stuck back on.
It was really weird - this was supposed to be brand new but it seemed almost like it was a refurbished machine. I was wondering if it was caused by the factory since it is BTO - do they open up a new box and add in the SSD RAM etc then pack it back up - maybe not being careful when they do it and it causes the smudges and possible other damages?
I could not deal with the damaged glass as you could plainly see it on the black bezel, so I called and Apple said they would replace it. The box was picked up the same day and I am now waiting to get the email acknowledging that a new unit is being sent.
Kudos to Apple to send a replacement without fuss but the general condition of the supposedly new unit was really suspicious.
Has anyone else seen these issues with new 27 imacs? I am also wondering if folks are seeing these issues from just the Shanghai factory or from all factories?
Hope my new unit arrives soon without any new problems. Just in case you are wondering, I did not even turn it on - as soon as I saw that defect on the glass, I had to return it.
My iMac slipped out of my hands and kissed the ground while I was moving it from my car into my new house. The hardware is still intact but there are a lot of scratches and a big crack in the corner which I don't find aesthetically attractive.
I made some research and found a couple of auctions on front bezels for the iMac G5 17", with or without iSight. I myself have an Intel iMac (Imac 5,1) so my concern is if the front bezel for "iMac G5 17" with iSight" will fit my Intel iMac?
Does anyone know which 17" LCD panels from the G5 iMac can be swapped with the Early 2006 Duo Core 17" iMac? My "speculation" is that the 17" G5 iSight equiped iMacs are a likely candidate.
I have a 17" unibody MBP with the matte screen option. I've had it since last July and, although I'm extremely happy with it, I still wish it had the black bezel.
Does anyone know of an easy way to swap the bezel or if any company has made an alternative like a black vinyl sticker cover? I've searched high and low with no luck.
I know you can purchase the bezel/glass front mount for the mbp, but I don't need the glass and I don't know if you can separate the two?
I had a difficult time finding a guide on how to do this, so I just tried to figure it out the best I could. I originally had a 320 gig standard drive called "Macintosh HD". I ordered one of those new 640 gig WD drives, and put it in slot 2.
I went into Disk Utility, went to "restore", and put my 320 gig as the source drive and the new partition on the 640 (which I also named "Macintosh HD") as the destination, and clicked "restore".
An hour or two goes by, and it says it's done. I turn off the mac, pull out the first drive (the 320) and it boots fine into the 640... I tested Mainstage, Safari, and basically everything seemed to be there. I changed the desktop background so I could tell them apart, put the 320 back in, and when I rebooted, it booted off the 320.
This time I went into System Preferences and changed the startup disk (I guess at this point I should have named the partition something different) and it booted up on the new 640 again.
I'd like to format the 320 but am terrified if I did this all correctly. I plan on using it for boot camp. None of the links I found suggested doing it this way, they all talked about third party utilities.
Anyone here care to help me out? Can I go and format that new drive safely? Is there something I can do to preserve the data (just in case) but take away the boot capability?
I was wondering if anyone had successfully installed and 2nd hard drive in their iMac?I have a 2 year old 2.8 24'' iMac and the performance just isn't cutting the mustard, it's all hard drive related and I already have a decent 1TB drive in there.I was thinking of perhaps swapping the optical drive with a second hard drive for RAID0, but not too sure if there will be space and was wondering if the optical drive is a standard SATA connector, or if there is some way I could run a SATA+power cables externally?
I want to know if there is some where i could purchase the part for the 15 inch unibody macbook pro's with the anti-glare option (aluminum bezel and matte lcd), to replace my glass/glossy lcd from my late 2008 unibody. I looked up the tech restore option but its looks crappy, id much rather pay for the parts and see if its swappable.
I am having difficulty removing the front bezel on my new 8X LG BD Burner. There seem to be 3 brackets holding onto it. Any ideas on how to get it off?
I have been reading and reading but I can't seem to find the answer. Im trying to figure out if the optical drive for the iMac has a slimline sata connector or a standart sata connector. Reason is I'd like to install an SSD and use an optibay adaptor.
Had a quick question. I'm on my third 27" stock 3.06Ghz imac that was replaced yesterday. The good news is that so far it doesn't seem to have any of the problems of my previous two 27" imac's. There is one thing though. A couple of seconds after pressing the power button to bootup there is a brief mechanical sound from the dvd drive like a quick ejecting sound even though there is no cd in the drive. My first 27" imac dvd drive made the sound but the second imac 27" Imac I had didn't. Is this sound normal? Would be curious to know why two out of the three 27" Imac's I had make that noise.
I'm using a 20" white intel iMac and cannot manage to remove a linux boot disc from the optical drive.At first, the only way that i managed to boot to the linux disc in the first place was from the Startup Disk menu in OSX. I could not even get to the Startup Manager ('opt' at boot) or boot straight to the disc ('C').Now i'm in a position where no matter what i do, the system boots to the linux disc. I cannot even force the startup into OSX to try to eject the disc from there. I've tried holding all of these keys/combinations at startup
My intel 2006 iMac recently died, and I'm wondering if I could one of the 1GB RAM sticks into the a G3 iMac I own. And more importantly: If I could put the hard drive from the intel iMac into the iMac G3.
The intel iMac was made in late 2006 and the iMac G3 was made in 1999, 1998 or 2000.
So i have the new I7 Imac. I have a Duet and a Powered G drive. The Duet takes firewire 400 and the GDrive takes fire wire 800. But my imac only has one firewire 800 port.am i able to run my duet daisy chain off my g drive?
it would be like this Duet--(FW400)-->Gdrive--(FW800)--> Imac. Is this going to cause any issues for my duet or my imac?(power and performance wise)???
I have ordered a new imac with 2TB hd option. I wanted to know what people are using for a backup drive. I dont intend to partition the internal drive and have a lot of content and thats why i ordered a 2TB drive. To backup i am assuming at least 4TB external drive would be required.
ie. can the GPU in the iMac 27" basically drive it's 27" + a 30" ACD.Can anyone confirm. Thanks. Also. can the iMac's screen be turned off while hooked to a 30 ACD, so effectively used as a workstation
I've been looking at a number of different Firewire 800 enclosures to use with my new Mac Mini and I have seen lots of complaints with almost all the enclosures that I have investigated, including the Newertech MiniStack v3 which I thought should be a good one. A recent enclosure I came across that I haven't seen any bad reviews about is the Icy Dock (MB559UEB-1S). I'd like to know if others are using this and what they think about it. The next question has to do with the type of hard drive to put into the enclosure. Is it worth getting a high performance drive, or will the Firewire 800 interface be the bottleneck even with an average speed drive?
I did a search but couldn't find any specific info as related to the 20" (late 2006) iMac. Basically, I do a lot of audio work with Logic and DP and I'm interested in replacing my 20" iMac's optical drive with a second internal hard drive. If anyone has any experience or insight regarding this, I would greatly appreciate your input. About 6 months ago, I did a DIY replacement of my iMac's internal hard drive (upgrade to 1 tb), so I'm pretty sure I'd like to DIY an optical drive / hard drive swap - that is, if it's 1) Proven to work stably (thermally and otherwise) 2) Not going to require the iMac's fan to be running faster/louder than normal Looking at my iMac's system profiler, the DVD drive is on an ATA bus (which, as I remember it, is slower than S-ATA). What kind of transfer rates do you think one could realistically expect with a hard drive on this ATA bus? Also, would I have to be careful about new hard drive compatibility, or are S-ATA and S-ATA II backwards compatible with ATA?
Lately I've been using my external hard drive as the main drive of my imac I5 and every day it freezes when I open 3 or 4 apps or more or while doing several stuff at the same time. This, obviously, doesnt happen when using the internal hard drive of the imac, so I suppose is due to using firewire 800 or usb 2.0. Is it normal for every external hard drive to freeze when using it as the main drive or maybe is it that my external hard drive is bad?
I'm planning on buying a more quieter external hard drive to use as the main drive of my imac, but I wont do so if it also keeps freezing every day. Any suggestions? Is it normal even when using firewire 800? When using the external hard drive I umount the internal drive of the imac. Maybe this is the reason? Its a Lacie Big Disk 500GB. Would an external SSD make a difference or would it still freeze?
Still waiting on my new 27" i7 imac. Trying to figure out if current desk is suitable. Can someone tell me the dimension in inches of the imac 27 from top of desk to the top of the imac
I'm curious what people use for external storage on their iMacs. I have a Mac Pro which is getting a little long in the tooth. I'm debating whether to get a new Mac Pro or to get an iMac, which would be a pretty good speed bump from my Mac Pro 1,1. I'd get the ssd drive, and the 2TB harddrive and get aftermarket RAM. But what I like about the Mac Pro is the upgrades you can do. And I like the four hard drive bays, for storage and backup. I've got over 3 TB of photos and music/tv/movies, so I'm going to need an external drive. In addition, I'd like to be able to backup everything. Is there an elegant way to do this on an iMac with an external drive that isn't super loud and hot?
My son's asked me to fix the CD drive on his G4 iMac. It very rarely opens when you press the 'eject' button. I'm wondering if it's just a build up of dust, so I was wondering if anyone's had experience of this, and how easy it is to access the drive.
I'm about a year into the Mac platform after switching from pc. My first Mac was a 17" MBP and I'm looking to get a Mac Pro. Like most I'm waiting to see when the new ones will come out. I have always been curious and just wanted to know can the processors be swapped out like on a pc? I realize this involves mother board issues and whatnot but the processors we're waiting for are the same ones that can be purchased by anyone. I always wondered why someone with say a 2008 Mac Pro could not just simply swap out the processors since the tower itself is still the same. Again, I'm fairly new but just was wondering if anyone knew the answer (s). Thanks again for any insight as I'm trying to really learn and understand the Mac system under the hood so to speak.
I have the possibility to purchase a Macbook Air 1.8 80GB HDD, awaiting a 128GB SSD to be released down the road. Can I have these drives swapped in the future?
So I had 4GB 15" MBP that I'm going to sell and bought a 2GB 13" MBP. I put the "old" hard drive from the 15" into the 13" and it works like a charm. Except it doesn't recognize my admin password as correct. I know I'm entering the correct password - is there any way to resolve this short of re-installing the OS?
