IMac PPC :: Can't Open A Webpage
May 25, 2012I use the webpage in question frequently - all other pages and email use ok. No problem with site - other sources confirm they can open it. Have cleared caches etc
Info:
iMac
I use the webpage in question frequently - all other pages and email use ok. No problem with site - other sources confirm they can open it. Have cleared caches etc
Info:
iMac
I can't see the address bar in safari....I am new to Mac and
Info:Mac Pro
After setting my Built-in Ethernet card to DHCP today, for some reason it all of a sudden got an ip adress and became green and stated that it was connected.
But i couldn't open any websites on either of my browsers (mozilla, safari) and when i used the diagnostic it said that the internet, isp and network were working but that the Internet and Server have failed.
Can anyone help me with nthis new perdicament? I read somewhere that maybe i should swap the eth0 and eth1? Make one internal while the other external? I'm not sure if this applies
I'm using a macbook and am connecting to a dormitory internet. I had to give them my Ethernet ID and they gave me a password and a login which i still am not too sure what to do with. When i use the PPPoE version my network settings/internet/server fail.
I was wondering if there was any simply way of setting a repetitive task of checking a certain page at certain times each day. (Like every hour or so).
View 3 Replies View Related my webpage often sticks around the end of the www's and does not open
Info:
MacBook Pro, Mac OS X (10.6.8)
When I start Safari in three of four accounts, the home page just blinks trying to open, but it never does. Safari works just fine in only one account.
Safari 5.1.4
iMac Intel
Mac OS X 10.7.3
Info:
iMac (24-inch Early 2009), Mac OS X (10.7.3)
cannot open a webpage that I have visited ok before. I know that the website has been updated in the last 2 days and has had GIS mapping improvements made to it.I can access the updated website fine on my windows laptop.
Info:
iMac, Mac OS X (10.6.8)
Safari and Chrome do not open web pages any more, even it is connected to internet. What can I do?, I have the FUSION installed in my Mac Book and I´m using it now, Chrome does get connected to internet from windows.
View 13 Replies View RelatedI heard about a software a few weeks ago where you could set it up so that a certain link always opens in a certain browser. I didn't need it at the time, but now I could really use it, and I can't remember what it was called!
View 3 Replies View RelatedAt the moment I have removed Acrobat Reader 10.3.1 because it conflicts with Safari. Preview is a perfectly fine pdf reader (and with lots of very nice features) but I don't see how I can make Preview open a pdf from a web page until it has been downloaded to file. And I have found at least one site that will not download to file before opening.
View 1 Replies View RelatedI don't get any error message, just a blank page showing nothing. I don't get no time-out message or anything. I have Mac OS 10.5.8 and Safari 5.0.2 and I have tried deleting the cookies and resetting the cache.
Besides I also noticed that while trying to load [URL] the page won't load but I can see the source code.
Everytime I go to the MLB page of ESPN, Safari loads the page, then beachballs. I then have to force quit the application.
This seems to happen on pages that have video.
Safari 4.0.3
OS X 10.6.1
MBA 1.86 SSD (2nd gen MBA)
Newest Flash Player downloaded and installed.
I am trying to access a website [URL] and in Safari I receive "Safari can't find the server" error message. In mozilla I am able to goto the home page but if I click on any of the links I receive "server not found" error message. I have not run into this problem with any other sites and was wondering why this is happening.
View 7 Replies View RelatedIts really irritating when i open webpages or click something suddenly one or two webpages open. How to stop this?
Info:
MacBook Pro (13-inch Mid 2012), iOS 8.1.2
I recently "upgraded" to Snow Leopard and Quicktime X. Since then, there has been one increasingly annoying problem: Anytime a webpage has a movie (more specifically, a movie with its own URL), it opens it up with QT in the browser and automatically starts playing the movie. Despite deleting QT X and reverting to QT 7, the problem persists, no matter the browser (I have 4).
So 2 questions:1. Why is it that this was NOT a problem at all in Tiger (simply disabled the autoplay in QT, worked for everything), but is a huge problem in Snow Leopard?
2. More importantly, how do I fix it without writing a Terminal script that is the length of War and Peace?
I am using Firefox for my web browsing on my 27' iMAC. Why do some webpages (like this one) stretch/fit across the entire width of the monitor screen and some only use 1/3 of the page?
Is it how the web page maker designed the page?
here's the issue, when i open a new tab and go to a website, i then wait for it to load, while it does load, i go onto the other tabs, but then when i go back to the tab that was loading, i get this message/error saying that the website cannot be found etc. as if there is no internet connection. i then click on refresh and it loads up the page just fine. this only happens when i go onto the other websites and don't wait for the new tab to load. why does this happen? it is very frustrating. i already reseted safari numerous times and im still having the same issue.
View 3 Replies View RelatedWhen i open safari, several other web sites open at the same time...
View 1 Replies View RelatedI have a PPC iMac G4 running 10.5.8. Both in Safari and Firefox, some sites open right away (mail.yahoo.com, wellsfargo.com, apple.com). But others will not open or will take minutes to open (yahoo.com, mail.google.com, wunderground.com). Bizare for sure. Set up static IP address to find this mac on my network. No settings have changed since this system was set up a few years ago. Other PCs on my network work fiine. Also rebooted DSL modem, and router.
Info:
iMac, Mac OS X (10.5.8), Also HP Notebook Win 7 SP2
I don't know what the deal is. I'm trying to install 2 sticks of 2GB into my 7,1 iMac, and the screw just won't turn. I'm using a standard Phillips head, and nothin' doin'. The screw is now starting to strip, so I guess I'm going to have to take this into the friggin' Apple Store just to have them open the thing.
I have recently switched most of the company I work for from PC to Mac. I have been having reports that [URL] will not load most of the time and when it does there are no graphics.
I have checked this on three different machines all with 10.6.4 using Safari, Chrome, and FireFox (one 27" iMac, one new mini, and one 15" MBP). They all act the same. Either the site times out and is not loaded at all or it loads in really large blue fonts that are all squished to the left of the browser window. The main thing these machines have in common is that they all have Parallels installed with Windows 7 installed. Two have Parallels v5 and the iMac has v6.
Initially I thought it was our ISP, BUT if you try it on any other mac that does not have parallels installed the site works fine in all three browsers. Also if you launch a browser in windows inside Parallels the site loads up correctly.
All other sites that are visited seem to be working fine on these same machines.
I have checked DNS and all seems well. All machines on the network (PC and Mac) are using the same DNS servers. All PC's work fine regardless of the browser used.
How to I refresh a webpage? I know in Windows it is one of the F keys.
View 5 Replies View RelatedI have just started using Rapidweaver and it seems quite good, but I am trying to widen the web page as the default setting is 500 and I would prefer it to be almost full screen?
I have tried doing to the page editor and changing the settings but when you look at the preview half the site just disappears. The actual size of the border does not seem to change.
I am trying to save some information from a webpage as a pdf. Usually this works for me but i am having problems. When i open the pdf file the sides are cut off. How can this be avoided?
View 6 Replies View RelatedI came across this site [URL] and thought it'd be nice as a christmas wallpaper. You have to click on "Let it Snow" to start the animation.
I'm guessing I need extra software.
This may sound like a newbie question but I've searched all over and couldn't find a thing. I'm starting to think it isn't possible to do so? Maybe someone here will come along and prove me wrong.
View 4 Replies View RelatedHow do I remove a webpage (not a widget) from dashboard? I accidently added/saved a webpage to dashboard awhile ago, and don't remember what I did or how to undo it.
View 3 Replies View RelatedAbout 70 percent of the links I go to on google redirect me to myspace, which I don't even use or have a account.It has a message that says:"Oops, we couldn?t locate the page you are looking for.Here are a few things you can try:Search for what you're looking for in the box to the rightCheck out the links listed below
Login to MySpace to take advantages of special features"
I am wanting to create a web site on my computer. I heard it is so easy on a mac! I can't find the app needed for this.
Info:
iMac, Mac OS X (10.7.4)
For some reason only fire fox browser is working on my mac... Safari will not load a webpage
View 14 Replies View Related