IMac :: Black Screen After Bootcamp 3 Install?
Dec 1, 2009
I decided I was going to install XP on a bootcamp partition tonight and everything went fine until I installed the Bootcamp 3 software. After installing the Bootcamp drivers the machine rebooted and I ended up with a black screen in Windows. I did hear the XP welcome music so I figured it was a display driver issue. I rebooted into safe mode and deleted the ATI 4850 driver and restarted. After removing the bootcamp driver everything was normal again other than the fact that I only had the default Windows drivers running.
What am I doing wrong? I installed XP off of an XP disc with SP2 already on it and ran the Bootcamp install off the Snow Leopard disc. Finally, not sure if this matters, I am running one of the new i7 iMacs.
View 4 Replies
ADVERTISEMENT
Feb 1, 2010
iMac 27" i7 with OS X v 10.6.x when I create the bootcamp partition for windows 7 and I install from my original DVD of Windows 7. I format the partition during the install of windows 7 and on the first reboot after windows 7 first part of the install, the screen shows the Windows 7 logo and says continuing installation and then a black screen and then nothing.
I have to hard power off the iMac and then it starts over says the thing about the system didn't shut down properly and gives me the option to start safe mode etc. and does the same thing each time.
View 3 Replies
View Related
Mar 29, 2010
I have a Mac Mini (2.55GHz intel duo core) and I trying to install windows xp with sp2 (downloaded from MSDN, burned to boot able disk). I created a 100GB partition with boot camp assistant, and started the installation. When I reboot the Mac Mini, and I select the windows CD icon, the screen goes black, and the Mac Mini just stops reading the disk, and stalls at the blank screen.
View 2 Replies
View Related
Jul 24, 2009
I tried to install Windows 7 via Bootcamp a couple weeks back, but shortly after it failed, I deleted the Bootcamp partition in Bootcamp Assistant. However, whenever I want to boot my computer, it tries to go into the Windows Installation, but it gets stuck on the flashing underscore on the top left of the black screen. Henceforth, whenever I want to boot into OSX, I have to hold down both ALT keys. is there any way of fixing this so the iMac boots STRAIGHT into OSX (like normally)
View 2 Replies
View Related
Nov 20, 2009
what can I do about his to boot back into OS X again. Holding down buttons (eg option) will not do anything.
View 1 Replies
View Related
May 24, 2012
I came back from work to wake up my iMac. It made the noise but the screen stayed black. I tried restarting by holding the power button- I can hear it start and the chime but still have a black screen. I tried resetting the pram, and unplugging the cord but I still get a black screen. I can hear the chime though; I'm not sure if that means anything. I just had the hard drive replaced in February so I hope it's not that. just wanted to clarify that when I restart, I get the chime but the screen stays black- I don't get to the grey screen. So I'm assuming right now that my display may be shot?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.5.8)
View 1 Replies
View Related
Dec 26, 2009
I am new to Mac and to forums. I am trying to install Win 7 with bootcamp. I have a new MacBook Pro and I have bought an OEM version of Win 7 Ultimate. I downloaded it and burnt it to a DVD. The DVD boots on a windows PC but I have the following when I try installing it with bootcamp 3 which came with the installed OSX 10.6: When clicking the "install windows" button the screen goes grey, the computer restarts and then the screen goes black and stays that way. The Windows installation screen never appears. I have tried many items listed in many forums but with no success. There seems to be many similar issues around but I have been unsuccessful using them.
View 7 Replies
View Related
Mar 23, 2012
I have a 2009 27" iMac, running Windows 7 x64 with BootCamp, and I'm having a problem when running Windows for more then 5 minutes.
After running it for about 5 minutes, the fans go CRAZY, the system doesnt get too hot though, the LEFT side of my screen starts flickering brightness, while the RIGHT side starts flickering colors. After a few more minutes of this, my screen goes completely black, I know the computer is still running, because I hear my music and the zombie killing me in Minecraft, but my screen, keyboard, and mouse dont seem to respond. I have double checked all drivers, I have updated BootCamp, and my next step was to reformat the drive, but that is my LAST resort.
Info:
iMac 27" 2009, Mac OS X (10.6.6), Running Win 7 64x on Bootcamp
View 5 Replies
View Related
Aug 28, 2010
I'm doing this for the nth time now but because it's been so long I've forgotten how long it's supposed to take.
I ran Bootcamp assistant, and installed the windows disc. Next up is a black screen, with a flashing cursor in the top left corner.
Been like that for 15 mins. Has it crashed or is it normal? It's on a brand new MBP so I'd expect it to be faster than when I used to do it on older MBPs
View 2 Replies
View Related
Feb 15, 2010
Couple of weeks ago my Mac Pro died. Anyway it turned out that the mother board and graphics card had over heated and failed due to dust from building work. So I've got it back from the repair shop now, the mac side is working fine, no complaints at all but bootcamp isn't so happy. When I first tried to boot into vista after getting the comp back, I restarted, selected the bootcamp icon and then the screen just went black. The light on the monitor went dim like it does when the computer is asleep and that's it. I didn't have anything important on the partition so I just removed it and repartitioned, witch seemed to go fine. But then when I put the vista disk in to install the same thing happens again. Screen goes black the CD spins up really fast but nothing else.
View 7 Replies
View Related
Apr 1, 2012
I bought a MacBook Pro 17inch i7 in November 2010 and it was working fine under Snow Leopard and Lion since then. Yesterday I installed Bootcamp and it was workng also. Today when starting from Bootcamp to Lion I had a Kernel Panic (had this never before) and the screen turned black. I just have the energy cable connencted to it, the computer starts somehow (noise) but no Startsound and screen keeps black.Then I made a little mistake by inserting a LION installer DVD. Cannot get this out anymore, even when I press the trackpad when starting it. I changed the internal hard drive to be sure that the problem does not come from there. I reset the PRAM. I reset the SMC. No way to get the laptop back to work.
Info:MacBookPro, Mac OS X (10.7.3), 8 GB RAM, 30 ACD
View 5 Replies
View Related
Nov 17, 2009
I just tried installing ubuntu via bootcamp. I went through the whole installation process then it asked me to restart. Black Screen for 5min. Manually restarted and my system would only start to another black screen that said GRUB, with no other options. I took the hdd out that I installed ubuntu on and I would get the same problem. Did this somehow change my bios/mac equivalent. Finally was able to get into osx by holding down left mouse button on startup (nothing else would work).
View 3 Replies
View Related
Sep 13, 2009
For the last 5 hours i have been trying to install Windows 7 on my iMac
Specs:
24-inch : 2.66GHz
2.66GHz Intel Core 2 Duo
4GB memory
NVIDIA GeForce 9400M
Running with 10.5.8 version. This problem that I get, and can't pass beyond it, is that I get black screen with a little white line in the left-upper corner of the screen. I have tryed to let it hang for 20 min, but nothing happens.
What have i done:
1. Boot Camp 32GB space.
2. Disk Util -> inspect the memory, reparing the harddrive, analyzing alle the things I can in Disc Util.
3. Format the partation og make new.Nothing has halped me.. I'm stuck and can't do anyting.
View 5 Replies
View Related
Nov 10, 2006
my Boot Camp install of XP—I successfully partitioned the disk in my new Mac Pro to install XP, but my problem occurs when re-booting to install XP itself. When the machine rebooted the first time to install, it stopped at a black screen with a blinking white cursor, old-school DOS style. Second time when I rebooted and held down Option, it spit out the Windows CD. When I put it back in and it appeared and I tried to select it, it spun up, looked like it was going to work, and then spit it out again, whereupon I got a DOS prompt asking me to put in a bootable volume and press any key. When I inserted the CD, it spun up, but pressing keys on the keyboard did nothing. I tried rebooting again. This time holding option yielded both the Mac HD and the Windows CD (no spitting out!). Taking this as a good sign, I selected the CD and waited. Same black screen with blinking white cursor as last time, no other response, no prompts, never progesses to an installer, pressing keys didn't help.
Has anyone else run into this problem? This is a brand new Mac Pro with the Radeon in it, I have a USB keyboard and mouse hooked up, and it has the latest firmware update.
EDIT: Seems the CD was bad. Slipstreamed SP2 into my original CD and went. Now I just need to get those ATI drivers.
View 1 Replies
View Related
Oct 13, 2009
I have an alu iMac, the kind that apple says could not support x64 bootcamp 2.
Having done a bit of research, I followed the instructions on installing the x64 mac pro bootcamp drivers on this computer, and since then have been using Vista x64.
Now, with snow leopard, I'd like to upgrade to bootcamp 3, and once again I am faced with apple's "this machine isn't supported".
Can someone point me in the right direction to get bootcamp 3 x64 drivers installed?
Would I have to dig up the first gen mac pro x64 drivers?
Is apple supporting x64 on the first gen mac pro?
Should I just install every single x64 driver off of the snow leopard installation disc?
View 2 Replies
View Related
Jan 2, 2011
Got me a Second Hand iMac g5 with OSX 10.6 on Screen is black. I changed Power Cable = no Result seen i opened and a thinny Cable from hard drive were not connected. I had to remove the Ram to do that,but no Result i opened again and found another thinny Cable from Broadband Socked comming out. I connected it but nothing happening i opened again with all Leads removed. I removed the Battery inside,pushed after 2 Hour such small Button inside,put Battery in Place,switched on and nothing happened. i pressed the power-Button twice,and on second Time the Screen went White and Fan blow as Hell,but stuck on that. I switched off and on and it was Black again. I disconnected the Lead and switched on after 5 Hour and nothing happens I removed Battery again,pushed after 2 Hour thinny black button inside and nothing when started With nothing happened i always mean "The screen is black",but the Start sound is and i hear a little Fan,and Keyboard reactes with Light on keyboard and with Ping on Computer if i push some Buttons.Mouse has light on Well. seems Screen works. I did not get the Software. It is Snow leopard on but i don't know if re-installing would help or if i need the Pack for 3150.- or what it cost. I also don't know if not Video-Card or logic board fails
View 5 Replies
View Related
May 14, 2009
I just purchased a new iMac and used Boot Camp 2.0 to install Windows XP on a partition. Unfortunately, when I went to use the OS X disk that came with the iMac to install the drivers, the disk was damaged. I am already in the process of getting a replacement disk.
My question is: I have a new Macbook and the OS X disk that came with it. Can I use this OS X disk to install Boot Camp 2.0 on my iMac?
View 8 Replies
View Related
Aug 4, 2009
Let me start by saying I have swapped the ram in the computer and the problem persists. I've also tried resetting the PRAM. I have unplugged all devices except the keyboard and mouse. I have reformatted and installed OS X Leopard, Tiger and Snow Leopard. I have even encountered this issue while the computer was running from the install disk. I'm pretty sure software, ram and third party devices can be eliminated from the possible causes. The computer continues to run after the screen goes black. I am connected to it right now using screen sharing, so I know the computer is still working. Putting the computer to sleep and then waking it up temporarily brings the screen back until its next random blackout. I have opened the computer to replace a dead HD, so I suppose it is possible that I knocked something in the process, but I did that back in December and the problem is a relatively recent development. I would really prefer to fix this myself, if I could only figure out what the problem is.
View 6 Replies
View Related
Mar 31, 2010
I have been experiencing some unusual problems with my imac. While on the internet today my computer crashed on me twice, the first time the screen just showed a bunch of vertical lines, the second it flashed some random colors then went black. After the screen change the computer was unresponsive. I have a bad feeling, is it due to overheating, a bad logic board or something else. This is the first time I have ever experienced this on a mac. Has anyone had any simiar issues? Or am I up **** creek? I can't really afford a new computer seeing that I just bought an iPad (it comes Saturday). I am not sure if my computer is still under apple care and even if it was I won't get it back by the time I have to go back to college. I attached a screen shot of my computer temps.
View 3 Replies
View Related
Apr 26, 2010
When I turn my Imac, it goes from the white screen to a black screen, then blue and then desktop. The whole process is fast, but is not normal. (at least is not like my previous MBP or the videos that I have seen on youtube) At the black screen stage, I can see some boot up information, etc, It is fast so I am not able to read it all. It looks like when booting an old windows or dos machine How can I change this? Is this normal? It also shows the screen when I shut down.
View 1 Replies
View Related
Mar 14, 2012
When I try to type an uppercase letter using the left hand shift key, the screen background turns black and no letter appears.
Info:
iMac, Mac OS X (10.5.8), power pc
View 2 Replies
View Related
Mar 19, 2012
I have been limping along for quite some time with a recurring problem with my PPC Flat Panel iMac G4.Sometimes when starting up I would get a black screen. The unit chimes at startup but the screen would stay black.I found that I was able to fix (temporary) the problem by removing the bottom plate and pushing the reset button under the base.(After shutting down and unplugging the unit.) after the startup chime, the screen turned gray with a folder icon in the center with a blinking question mark.After shutting down and restarting, this happened again 3 times.On the 4th shutdown/startup it went back to the black screen.Repeated shutdown/restarts have no effect.Shutting down, unplugging the unit and pushing the reset button is also having no effect.I hear the startup chime every time. Black screen every time as well now.Â
Info:
iMac, Mac OS X (10.4.11)
View 2 Replies
View Related
May 1, 2012
my iMac(mid-2010) screen goes black soon after startup.i did notice some flickering about a week ago.i tried shutting it down,removing the power cord and all peripherals but it didn't help.i had done a software update a few days before the flickering started.
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.7.3)
View 1 Replies
View Related
May 11, 2009
I'm turning my old white imac into a bedroom plex viewer (it will eventually become a kitchen computer) and I want to do a clean install. This was my primary workstation for years before I got my Mac Pro and its just loaded with crap, all of which I've backed up to sort through later
It currently has Tiger and I want to upgrade to Leopard (I bought a family pack for it and my powerbook). I have a bootcamp XP partition which I would like to keep and not destroy. Can I do a clean install except for the windows partition? Or will doing a clean install destroy bootcamp.
View 4 Replies
View Related
Sep 24, 2010
The screen randomly turns black without any major reasons. It doesn't seem to be a sleep mode/screen saver thing as the music continues to play on. I can adjust the volume or pause the music with the keyboard but the screen just won't turn back on. I have to shut it down using the power button and it happened several time the last couple days. Anyone else experience the same thing and got a solution?
View 4 Replies
View Related
Apr 18, 2010
See the pictures. They look almost like ink but no ink has been near the screen.Tried cleaning the screen but with no luck. It lies on top of any open window.
View 3 Replies
View Related
Jun 22, 2014
My imac boots up and then the screen goes black, i have made a short video to show the error...i have also run disk utility and it comes back with no errors. URL....
View 3 Replies
View Related
Jun 1, 2014
This just started yesterday (May 31st). I keep everything updated as it comes out and nothing new has been installed in the last couple of days.
When I need I wake up my iMac (now requiring a keystroke or mouse press instead of just moving the mouse), the screen comes up black, but the cursor is there and moves around fine.Â
It stays black for a while (15 seconds or longer, but it feels like forever) and then it finally comes up completely.Â
Info:
iMac (27-inch Mid 2011), OS X Mavericks (10.9.3)
View 1 Replies
View Related
Aug 11, 2009
The screen/crt of the imac that I have been using since about '98 went black - this actually happened a couple times previously but I was able to get back in (no idea - one of those things where out of frustration you just start pushing everything at once and it suddenly pops back on). I have tried everything - the internal battery, that little button on the motherboard (not sure if that is what it is called) that resets everything, the connection of the main power button on the front, etc. I am fairly sure it is stuck in sleep-mode or something (no beeps, hard drive doesn't make the usual booting-up sounds but you can tell that it is receiving power) but after months of wasted effort I finally gave up. I bought another slot-loading G3 and would like to swap hard-drives between the two - I have taken my old G3 completely apart so many times that I am totally comfortable with that aspect but have hesitated because if I somehow blow this one I will be left with nothing.
View 7 Replies
View Related
Dec 21, 2010
For the past few weeks it has been going to a black screen when trying to wake it up from sleep. Either I've put it through too much work lately editing all these photos and its really tired. So, often it wakes up normally and functions fine, well, not really. It is seemingly very slow. It requires a lot of time (more than before) to open up a program or it gives me the "spinning wheel of death" when trying to go to a different page on the internet or open up a folder on my desktop. Amongst other things that require it to think. So It's just a lot slower in general than before.
View 3 Replies
View Related
