I'm doing this for the nth time now but because it's been so long I've forgotten how long it's supposed to take.
I ran Bootcamp assistant, and installed the windows disc. Next up is a black screen, with a flashing cursor in the top left corner.
Been like that for 15 mins. Has it crashed or is it normal? It's on a brand new MBP so I'd expect it to be faster than when I used to do it on older MBPs
I am new to Mac and to forums. I am trying to install Win 7 with bootcamp. I have a new MacBook Pro and I have bought an OEM version of Win 7 Ultimate. I downloaded it and burnt it to a DVD. The DVD boots on a windows PC but I have the following when I try installing it with bootcamp 3 which came with the installed OSX 10.6: When clicking the "install windows" button the screen goes grey, the computer restarts and then the screen goes black and stays that way. The Windows installation screen never appears. I have tried many items listed in many forums but with no success. There seems to be many similar issues around but I have been unsuccessful using them.
View 7 Replies View RelatedI just tried installing ubuntu via bootcamp. I went through the whole installation process then it asked me to restart. Black Screen for 5min. Manually restarted and my system would only start to another black screen that said GRUB, with no other options. I took the hdd out that I installed ubuntu on and I would get the same problem. Did this somehow change my bios/mac equivalent. Finally was able to get into osx by holding down left mouse button on startup (nothing else would work).
View 3 Replies View RelatedImac has all the updates before I partitioned with bootcamp (52 GB) I inserted a Win 7 Pro 32 bit disc (OEM from newegg). It installed windows and auto rebooted, windows came up and auto booted again. All I got was a black screen, I think it just turned off. I tried powering the machine on and booted to windows, but a message asking if I wanted to boot normally or go into safe mode. Does anyone have an idea why I can't get past this step?
View 2 Replies View RelatedImac has all the updates before I partitioned with bootcamp (52 GB) I inserted a Win 7 Pro 32 bit disc (OEM from newegg). It installed windows and auto rebooted, windows came up and auto booted again. All I got was a black screen, I think it just turned off. I tried powering the machine on and booted to windows, but a message asking if I wanted to boot normally or go into safe mode. Does anyone have an idea why I can't get past this step?
View 1 Replies View RelatedI have a Mac Mini (2.55GHz intel duo core) and I trying to install windows xp with sp2 (downloaded from MSDN, burned to boot able disk). I created a 100GB partition with boot camp assistant, and started the installation. When I reboot the Mac Mini, and I select the windows CD icon, the screen goes black, and the Mac Mini just stops reading the disk, and stalls at the blank screen.
View 2 Replies View RelatedI have a 2009 27" iMac, running Windows 7 x64 with BootCamp, and I'm having a problem when running Windows for more then 5 minutes.
After running it for about 5 minutes, the fans go CRAZY, the system doesnt get too hot though, the LEFT side of my screen starts flickering brightness, while the RIGHT side starts flickering colors. After a few more minutes of this, my screen goes completely black, I know the computer is still running, because I hear my music and the zombie killing me in Minecraft, but my screen, keyboard, and mouse dont seem to respond. I have double checked all drivers, I have updated BootCamp, and my next step was to reformat the drive, but that is my LAST resort.
Info:
iMac 27" 2009, Mac OS X (10.6.6), Running Win 7 64x on Bootcamp
iMac 27" i7 with OS X v 10.6.x when I create the bootcamp partition for windows 7 and I install from my original DVD of Windows 7. I format the partition during the install of windows 7 and on the first reboot after windows 7 first part of the install, the screen shows the Windows 7 logo and says continuing installation and then a black screen and then nothing.
I have to hard power off the iMac and then it starts over says the thing about the system didn't shut down properly and gives me the option to start safe mode etc. and does the same thing each time.
I keep getting the following error 3 quarters of the way:
STOP: C000021A "Fatal system error. The windows subsystem process terminated un expectedly w/ a status of OX C000005. System shut down. It's a blue screen with white letter.
I'm using Office XP Service Pack 2 with imac OSX Install DVD version 10.6.3.
The steps I'm taking are:
Log onto my mac and use pre installed bootcamp to partition the drive. I'm using 32GB of space. Then I use my xp Prof w/ service pack 2 cd to install xp. At this time everything is working fine except for the missing drives. Then I put the bootcamp cd that came with my imac into the iMac and run bootcamp. It looks like everything is working perfectly. The imac is finding wireless internet and all the drives look like they are working fine until out of no where a blue screen pops up and states what I wrote below. There is nothing else on the screen. I'm using a 27 inch imac that i bought about 5 weeks ago new.
I have to boot into bootcamp frequently and it seems that shutting down osx, restarting into win 7/bootcamp takes quite a while... 1 minute and 40 seconds...?
This especially considering my osx startup is on an intel gen 2 ssd, and the win 7 startup is on a seperate gen 2 ssd... shouldn't it be 30 seconds or so?
perhaps I am doing something wrong? I wanted to install Windows XP on my iMac. I previously had partitioned my Mac drives. I backed everything on these drives to my external and blew the partitions away creating my one Mac drive again.
I then ran Bootcamp, created a partition and installed XP. Everything was fine. I then partitioned my main drive and got the warning message about Bootcamp maybe not working afterwards. So I finished partitioning my Mac drive as I wanted and now I don't have the option of booting into XP through Bootcamp. When I try it just shows the Mac drive as my only boot option. I see the XP Bootcamp drive in the System Preferences startup disk area, but I assume I did something to the partition once I partitioned my Mac drives
I'm installing mac os x snow leopard onto my new hard drive that I installed into my computer. When I turn on the computer and start it up and tell the computer to boot from the disc I get the apple sign and the swirl at the bottom. Then the screen goes black and all I hear is the super drive working. It never moves past the black screen.
Info:
MacBook Pro, Mac OS X (10.7.2)
I installed 10.7.4 update and now my screen goes black. It is quiet random at times, but mostly goes black after a few seconds from wakeup. Pressing the space-bar restores the screen, then sometimes it goes black again almost immediately.
Anyone else having the same problem?
Info:
iMac, Mac OS X (10.7.4)
I'm having the late 2009 Macbook. Trying to find out if bootcamp with XP Black Editions will work.
I'm running tiger and I've found these instructions, will they work?
Back up your OS X partition.
Create new HFS and NTFS partitions with Disk Utility (or use iPartition $$$ to preserve data).
Insert Windows XP SP2 disc
Reboot Mac, holding down Option.
Boot from XP disc to install it on the NTFS partition.
I have a friend who has a leopard dvd, can I get the proper drivers from that (I'm using a mac pro tower).
can I create a new partition just by using disk utility and leave my existing one intact without modifying it?
also... do I have to backup my os X partition?
I just downloaded the RC of Windows 7 (64-bit) and am trying to install it on my 2 month old macbook pro. This is my first mac, so i'm still getting used to it. I have created a dvd with the w7 iso image on it, created a 20gb partition using bootcamp, and now at the step of installing w7 on that new partition. The problem i'm running into is when trying to install, it says the partition needs to be formatted as NTFS. After backtracking and not seeing an option to make this new partition in NTFS format, i'm at a dead end. What can I do now?
View 6 Replies View RelatedI use SL Bootcamp Assistance and installed Windows 7 RTM on my Mac mini, but after installation no Bootcamp in Windows.
My Mac Mini use an Apple mouse but a wireless PC keyboard.
My questions are:
1. Anyway to get the Bootcamp back so I can choose to boot in Mac OS X?
2. With the PC keyboard, how to "option-key" so I can select the boot device while power on?
BTW I purchased my Mac Mini in April 2009 and did a brand new install of SL. I noticed when used Bootcamp Assistance it said my machine cannot support x64, but I followed a post in this forum to "force run" BootCampx64 under /Bootcamp/Drivers/Apple of the SL DVD. Is it the reason why Bootcamp is
gone?
So I got windows 7 installed on my 2010 mbp but when I went to install my windows drivers via my Mac osx disc I realixed I couldnbt find it.
Is there anyway to install all the drivers/apple software without my OSX disc? If not, how do I go about getting a replacement disc from apple?
Is this possible?
The only copy of windows XP i have is pre SP2. I tried to install this last night via boot camp, but after spending hours installing and loading the drivers from the mac disc, not all were installed. Then I was hardwired to my router to run windows update to get SP2/SP3 I could not for the life of me get the 3 drivers to install.
Ethernet controller, although the ethernet port worked. Bluetooth driver, cannot find the driver on the Mac disc VGA driver, cannot find the driver on the Mac disc
I also don't seem to have a wireless connection or even an option to use my wifi card on my macbook with windows.
The macbook is a 2010 unibody, white.
realised that my previous post was in the wrong section, (sorry!) so i decided to re-post it in the correct place.
Ok, so i setup bootcamp and installed windows xp. installed the bootcamp drivers, and things worked fine for a couple of days.... than the bootcamp appeared to get corrupted. fn keys cant work, xp cant detect mac partition (cant access any files in there, though the reverse works), no bootcamp icon in system try. someone mentioned to search for the KbdMgr.exe or bootcamp and start the program, but i cant find both items.
re-installation of bootcamp with the cd doesnt seem to work for me. either the system restarts before installation is completed, or xp crashes during the installation process. EDIT: now all i get is xp crashing before installation is complete
downloaded the bootcamp 2.1 but absolutely nothing happens when i click on the exe file!
there are a bunch of apple drivers shown in the add/remove programs, but they dont seem to be working (tried to remove them all and re-install, but xp crashed halfway and i had to use the cd to repair it). seems to me all that the drivers are 'there' already, but not working.
short of completely starting over from scratch and re-installing the entire windows, is there anything else i can try?
[URL]
how exactly is that achieved?
anyone tried it, and any benefits of bypassing bootcamp?
and doing it without bootcamp, will rEFIt still work?
I just purchased my new Mac 2 days ago, Its a Macbook pro 2.53ghz model. I'm a big gamer so I want to instal Winxp to play games like fallout 3, crysis, cod 5 etc. How much space should I create for my windows partition? If its more than 32Gigs, what is the procedure after?
View 11 Replies View RelatedI've been trying on and off to get bootcamp working on my mbp but it has issues I can't fix so I'm giving up with bootcamp. Is it possible for me to install windows on another partition using a program such as parallels, then natively boot up. I say this because I assume running games inside parallels would be slow. (I've tried crossover games and it is buggy with steam for me)
View 8 Replies View Relatedi am about to install windows vista via bootcamp on my new imac and i was just reading on apples install guide to only install windows 32bit... but the version i bought is 64bit cause in a previous thread i asked what u should install and someone said 64bit... is it ok to install it? what should i do... if i anyone can answer this quickly it would mean alot i want to install it asap!
View 12 Replies View RelatedI just got everything brand new again: a Macbook and Windows XP SP3 integrated CD.
I installed Windows and I am now struggling to install the bootcamp drivers.
I run the 2.1 installer and nothing happens at all. nada, no error messages etc.
I presume that this is some problem with SP3, but I have SP3 integrated so I can't install SP2 , install bootcamp and then install SP3, unfortunately..
I've tried three times to install Bootcamp drivers on my Windows 7 partition and all times have failed with a mini BSOD that says "A problem has been detected and windows has been shut down to prevent damage to your computer" a couple seconds after it's done installing the ATI drivers and it's just a green bar with no text above it. I couldn't read the rest of the BSOD because it goes away in 2 seconds. Any help/fix for this would be appreciated. I'm thinking of just reinstalling the 2.0 drivers but I really want access to my Mac side while in Windows.
View 2 Replies View RelatedJust got my copy of Windows 7 Home Premium and decided to install it via bootcamp to try out Aion! but when the mac restarts to install Windows 7 I always get the flashing _ I left for an hour or so but it stays like that! I have the full final copy of Windows 7!
View 5 Replies View RelatedI tried to install wondows xp SP3 using bootcamp on my macbook pro (new) and it goes fine up to the point of the actual installing. It goes to 28% and then freezes. I was using the FAT system with 32gb partitioned space, however I also tried it on all of the other modes but it doesn't work either and always stops at 28%.
View 4 Replies View RelatedI own an unused copy of Windows XP professional and i want to add a new partition on my Macbook Pro so i can install Windows XP on it and have OSX and Windows on one machine. But with the new version of Bootcamp that comes with OSX Lion, i cant install XP because its not supported. When i put the Windows XP Installation disc and click the 'Install" button on Bootcamp, it doesn't recognize the disc because Windows XP isn't supported on this version of Bootcamp. I am also unable to downgrade back to Snow Leopard. Is there anyway i can get Windows XP to work on my Lion based machine without downgrading my Mac OS or using a VM?
Info:
MacBook Pro, Mac OS X (10.7.4)
I decided I was going to install XP on a bootcamp partition tonight and everything went fine until I installed the Bootcamp 3 software. After installing the Bootcamp drivers the machine rebooted and I ended up with a black screen in Windows. I did hear the XP welcome music so I figured it was a display driver issue. I rebooted into safe mode and deleted the ATI 4850 driver and restarted. After removing the bootcamp driver everything was normal again other than the fact that I only had the default Windows drivers running.
What am I doing wrong? I installed XP off of an XP disc with SP2 already on it and ran the Bootcamp install off the Snow Leopard disc. Finally, not sure if this matters, I am running one of the new i7 iMacs.
