IMac :: Clean Leopard Install Without Destroying BootCamp
May 11, 2009
I'm turning my old white imac into a bedroom plex viewer (it will eventually become a kitchen computer) and I want to do a clean install. This was my primary workstation for years before I got my Mac Pro and its just loaded with crap, all of which I've backed up to sort through later
It currently has Tiger and I want to upgrade to Leopard (I bought a family pack for it and my powerbook). I have a bootcamp XP partition which I would like to keep and not destroy. Can I do a clean install except for the windows partition? Or will doing a clean install destroy bootcamp.
The internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
I've been using it since day one with Tiger and Leopard (31 Gb for windows), now I just wanna uninstall (erase) the windows part as I don't need it anymore and I could use the extra storage. I would also like to know how to wipe all the data and do a Clean install for MAC OSX as well , might need that for a better performance after all .
I would like to clean install Lion into my Macintosh HD drive and leave the bootcamp drive without getting affected from it...is it possible or do i have to do the install on all the drive?
This is the first time i reinstalled(clean install) my snow leopard on my MBP. All went fine but then i inserted the disc for bundled application (which contains the ilife apps) but it keeps failing.
It says that "the installation failed. the installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance".
I've also done my research on this matter. I've gone thru a few steps i tried as below without success:
1)normal install - fail
2)repair permission - fail
3)install in safe mode - fail
4) install using another admin acc - fail
5) made an image out of the disc and install - fail
6) used a similar disc(my dad's since we have identical version) - fai
7)updated my system and install - fail
8) reinstall the mac - fail
i cant think of any other solution as im a bit noob when it comes to mac. is there any other things i could try before taking it Apple?
I purchased the new Mac Box Set with Leopard 10.5.6, iLife '09 and iWork '09.
I was 50/50 on which type of Leopard install I wanted to perform today.
Looks like the disc made the choice for me and performed, what I'm assuming, is the upgrade. All of my files, settings, etc. were intact after the reboot.
there is too much about clean installs now on this forum... and a lot of information conflicts with other information. can someone just have a step by step process of how to do a clean install for snow leopard below.PLEASE no guessing, and only people who have done it please comment.then we can just link people to this thread.
I thought this might be useful if you wanted do do a clean install with the Snow Leopard DVD. There have been a lot of threads asking about it. Apple designed Snow Leopard 10.6 so that you cannot select 'Erase Install' when booting from DVD like in Leopard 10.5. Apple states that you need Leopard 10.5 installed in order to 'Upgrade' or 'Install' Snow Leopard 10.6 - This is not true.
This guide shows you how to do a clean install of Snow Leopard 10.6. Extremely hand if you need to install a new hard drive. Please note this was performed off the 'Upgrade' disk - which shouldnt [according to Apple] be able to do a full install! I also outline how to migrate your data to the new install. Let me know what you think. YouTube - Guide: How To Do A Clean Fresh Full Install Of Apple Snow Leopard OS X 10.6.
I'm fairly new to the Mac OS. Switched from evil Windows. World is much more stable.
I want to upgrade via clean install to snow leopard. I have read mixed messages that this can and cannot be done. If it can, can someone please post some clear and definitive instructions in how to do this from the upgrade disc of snow leopard.
Since I have been running Leopard since december of 2007 I have accumilated a bunch of programs and files that i just don't use and don't need.
I have been running time machine for about a month now and I was thinking of just doing a clean install or Leopard to completely erase and clean up my disk and then do the SL upgrade.
My main concern- Can i plug in my time machine external and drag and drop the files and applications that I want and need and just leave all the other things on my external?
I've been trying to install and use BootCamp from Apple, so I can use Visual Basic for my classes. Obviously, I need Windows for this. Anyway, i downloaded BootCamp, installed it, and then Windows XP. After this I was told to insert my OSX disc to get the drivers. Well nothing happened at all. I suppose because this install of Leopard didn't include BC, it was a seperate download.I then read that BC Assistant should give me the option to burn a drivers disc. I looked at the provided screenshots, and right where the button should have been, there was nothing.
I want to do a clean install on my mac. It is starting to act up a little and I want to just clean it up and start over. I have parallels with windows 7 on the computer with office 2010.
I also have cs5. After I wipe and reload snowleopard can I reinstall my applications with the old serial numbers or are my serial numbers all used up? do i need to uninstall thm before the wipe?
I am going to be selling my old imac 20" ( 2007), How do I erase the memory and reinstall the OS? How long will it take? I assume I have to reinstall OPS 10.5 and 10.6 ?
The hard drive has been nuked and their is nothing on it, no operating system or anything.
I have bought a set of install disks for Mac Panther 10.3, however the computer will not read them. I hold "C" down as I turn the computer on but I get nothing except a flashing box with a question mark in it.
I have tried using the disks for my MacBook Pro but it tells me they are the wrong disks, however they at least load up to that point.
I have a 2.16G (black) macbook that I will be upgrading to Snow Leopard. Since I've had the computer for over three years, I want to perform a clean installation of 10.6. I don't have a ton of files on my macbook and--apart from some large Garageband files--what I do have are relatively small (Word documents, Excel spreadsheets, music, photos) so I've always backed up by saving things to CDs/DVDs. Not the best plan, I know, which is why I recently purchased a Lacie 1TB external drive so that I can have a clone.
I would like to install OSX onto the external drive but I'm not sure how things should be sequenced. I've never partitioned a HD before; should this be performed first? How's this for a sequence:
1) partition the external HD first 2) install Snow Leopard onto the external HD 3) make the clone of my system and 4) do a clean install of Snow Leopard on my internal macbook HD
Does this make sense or is there a better way for me to approach this? Also, is there anything different I'd have to do to install the 10.6 on the external drive?
Does anyone know if the current version of the Cisco VPN Client runs on Leopard? I know when Tiger came out many people had trouble getting it to work, and the Cisco VPN Client always appears as an issue in 10.4.X seeds.
Also, if it does work, would performing an Archive and Install mess it up? I know its install is a little nasty, and I'm just wondering if it installs some files in weird places. Would I be better off doing a clean install figuring I need the VPN Client to work?
I'm so annoyed regarding the broken Entourage <-> Exchange SSL root cert situation that I feel I must let others know of the following...
To perform a fresh / clean installation of Mac OS X 10.5 Leopard to a totally blank/formatted hard drive using nothing but the upgrade DVD, do the following:
1. Boot from the Mac OS X Leopard Upgrade DVD (hold 'c' while booting).
2. Notice that the check for previous will fail (and "Continue" button is grayed out).
3. Choose the option of restoring from a Time Machine backup and go as far as you can (note: if you do actually have a Time Machine backup, pretend that you don't - making sure you've already removed any backup drives you may have plugged in).
4. Now go back to (almost) the initial screen.
5. Notice the "Continue" button is no longer grayed out...
I assume that when I get my mac, a snow leopard drop in disc will be inside.
1. As soon as I finish the setup, and am presented with the desktop, I will immediately put in the snow leopard disc. In this scenario, is it ok to just do a normal upgrade since the system is pretty much untouched? 2. My understanding is that if I do a clean install, I will lose iLife, and will have to reinstall it using the discs that came with my machine, is this correct? 3. I'm confused about archive and install. Will all my applications (iLife, etc) be left alone? Is this sort of like a clean install, except you have a copy of your old system files? Is it ok to delete the old system files afterwards? 4. From the scenario I described in #1 which of the 3 installation methods is the best to do?
I'll be upgrading to Snow Leopard when it comes out (hopefully the 28th). I've decided to do a "clean install" because I'm working off a Time Machine backup that originally came from a PowerBook.
So I need some help coming up with a checklist of things I haven't thought of to backup. I've thought of lots of the obvious things:
-iPhoto Library (does backing up just the library preserve albums?) -Music/ Movies + playlists -Documents -iPhone backup (where is this located?)
I currently have my itunes pretty much the way I like - I have used the rating system and the play count feature etc., a lot. But I am planning on doing a clean install of Snow Leopard when I get it. Is there a way to copy this data over on a HDD and then copy and paste it?
If i go out and buy Snow Leopard for �25 can you do a clean install or is it an upgrade only meaning to do a clean install you have to install leopard first then snow leopard afterwards
I want to do a clean install on my macbook pro with snow leopard, and already have all of my applications and files backed up. But I was wondering, If I restore the apps onto the newly wiped hard drive, will I have to reactivate them? Like with final cut, will I need to re-enter the serial number for it to work? or will it run just like it used to?
My MacBook is almost three years old and is getting very sluggish. I will be upgrading to a MacBook Pro next year but in the meantime, would a clean install improve the speed? I have all my files backed up on an external hard drive. I'm not necessarily looking at restoring from backup, as I think it would be nice starting out "new" and only copying over things I need need from my external. What do you think? What are the pros and cons of a clean install?
I just got a Mac Mini with Snow Leopard. The guy I bought it from took out the 80GB HDD that was in it and put my old MacBook 160GB HDD in it so it's like my old laptop on a mini. I want to start over with the system fresh and new as it'll be serving a new, re: family computer, purpose now. I don't have the SL upgrade/install disc right now and not sure if/when I'll get them back. Is there a way to wipe it back to new and keep it on snow leopard? This HDD was initially a Leopard drive when I first purchased it FYI.
Just wanted to find out if any one will do a clean install of SL on their new imac? I hear there is a lot of bloatware ie Printer Drivers, Asian Language Fonts etc that take up a lot of unnecessary HD space.
I'm getting an i7 very soon waiting for possible iLife update, but will pull trigger what ever happens before July 7th for educational discount.
am thinking about doing a clean install of Snow Leopard, but was wondering about the use of Time Machine in the Migration Assistant after it's re-installed. I have a lot of music, documents,apps etc (probably around 70-80gb) on my Time Machine backup that I would need to re-install. When you choose Time Machine in the migration assistant, does it let you choose what to pull off the Time Machine, or does it just take everything?
I made a clean install of Snow Leopard and now I'm slowly installing all my apps. I had Undercover running on Leopard and I installed it again. After the reboot, a pop up asked my the same question as an iPhone asks"uc" would like to use your current location.
