IMac :: 2008 24inch - ESATA SSD Boot
Nov 25, 2010
I purchased and installed the Commell MPX-3132 in place of my Airport Card. Installation was very easy and the RAID drivers work perfectly. I cloned my HD to my SSD using CCC and everything shows up fine via ESATA and USB. When I try to boot from it via ESATA it is not recognized, but it boots perfectly from USB. I Booted to it via USB and installed the RAID drivers onto the SSD then tried to boot via ESATA again with no luck. The SSD I bought is the Corsair Force 120 and the enclosure is a Hornettek usb/esata [URL:...] I haven't had a chance to test another enclosure.
View 13 Replies
ADVERTISEMENT
May 31, 2012
I have a late 2008 12" MacBook with a FireWire 400 slot (only). I am hooking up an 8TB Raid hard drive to it for digitizing, backup and editing on FCP 6 and would like to have a higher speed available than the laptop's FireWire 400 provides. Is there a way to augment/build out the MacBook to utilize either a FireWire 800 slot or an eSATA EC2 card? I don't think this version of the MacBook (MacBook4,1) has a PCI or PCIe card slot. Although I believe it may have a mini-PCIe card somewhere, as the last page of the Users Guide says (under Europe—EU Declaration of Conformity):
"Hereby, Apple Inc. declares that this 802.11a/b/g/n Mini-PCIe card is in compliance with the R&TTE Directive."
Info:
MacBook, Mac OS X (10.5.8), 2.4 GHz Intel Core 2 Dup
View 3 Replies
View Related
Apr 17, 2012
my imac g5 wont boot up. I get the folder with the question mark coming up.I have reset the smu & pram. Still not booting. I have tried to restart with option key, but only the two arrow keys displays. No hardrive icon displaying. I have tried to re-install with original disk os 10.3.5 but device keeps on spitting out the dvd's( I also have tried Tiger OS 10.4 and Leppard 10.5same issue) . I notice also that the fan runs loud after a few minutes. I checked the Hard drive via another device and found it unallocated. I reformatted and re-installed. No go after rebootinng.
Info:
iMac
View 9 Replies
View Related
Sep 10, 2010
My grandparents broke their 24in Imac's monitor and it needs a replacement, costing around 800+ dollars. I was wondering if it was possible to operate it with a second monitor and have that one be the main computers display. Is it as simple as connecting the second display or do I have to disconnect the internal monitor? I'm not worried of opening up the computer, its not like I can damage the screen edit: The Imac is out of warranty and is a 2007 or 2008 model. 2.4GHZ C2D 4GB Ram. If you need any more info just let me know
View 1 Replies
View Related
Mar 4, 2009
I plan to use it for basic home stuff such as photos, video editing (basic), t'internet etc. I dont plan to play any games on it (i have a ps3 and a wii which do a much better jobs me thinks). The question is this: will the low end 24in imac be good enough? there seems to be a lot of negative comments round here on the graphic card. also on a not less serious note, do you find the screen too big on your desk. Is it overwhelmingly big?
View 5 Replies
View Related
Aug 18, 2009
My imac made louder then usual sound for awhile. At first i thought it might be my HD, so i replaced it. But the sound came back. After few days however, it resided. But now, it's too damn quite. So, using few software utilities, to check up on the temp of the fan, it was only registering 2 out of 3.
View 1 Replies
View Related
Aug 27, 2009
This appears to be a really informative forum for existing and potential mac owners. I'd like to start, as a "Mac noob" by asking the following please. Thinking seriously of getting an Imac 24" but I would like to be able to edit HD (1080) video on it down the track. Would an Imac cope with this or would a Mac Pro be better (or overkill)and which would be most efficient, the 2.66GHz, 2.93GHz or a 3.06GHz, if I went with an Imac Video card NVIDIA GeForce GT 130 512MB or a # ATI Radeon HD 4850 512MB. Having trawled through the threads, from the beginning of August(I'll go back further later), it's clear that 4 Gb of RAM is certainly enough.
View 10 Replies
View Related
Jan 14, 2009
dread going to work and use pc all day. anyway the only issue i have is every so often i will be working away and my whole screen goes blank for a second,,freezes. I have to tap the mouse to get it to come back,
View 5 Replies
View Related
May 25, 2012
I have a problem with my iMac 24inch Graphic card. Actually I decided to install windows7 on my iMac 24inch early 2009. After the installation of its graphic card (Geforce GT120), the iMac turns off suddenly after a while. I tried to find the solution but I was unable to recognise it. A friend told me that the problem goes back to the bios(firmware) update and I have to update it, but as I'm currently using windows7 I have no idea how to do that.
Info:
iMac, Windows
7
View 3 Replies
View Related
Mar 3, 2009
I have an Imac 24in that I purchased last June with the upgraded video card, NVIDIA GEFORCE 8800 GS W/512MB. Anyone know if it might be possible to upgrade it to one of the newer cards just released with the new imacs?
View 1 Replies
View Related
Mar 12, 2008
I've got a 2008 Mac Pro with 4 internal hard drives that are in a 0+1 software raid. Unfortunately, this prevents me from using Boot camp on any of these drives.
I'm curious, is there a PCIe card that adds eSata ports that would allow me to put Windows XP on an external enclosure that is bootable?
I've been scouring the message boards and forums and have found cards by CalDigit, FirmTek and Sonnet, but I have no idea if any of these will support with Boot Camp/Windows.
I'm not interested in using the on mobo SATA ports because A) they aren't recognized in Windows, and B) I don't want to put a drive up in the CD drive bays (because of the bad airflow).
View 1 Replies
View Related
Jul 4, 2010
Does anyone know if the Mac Pro will run bootcamp via
NewerTech MAXPower eSATA 6G PCIe 2.0 Controller Card
on startup
(using windows 7)
View 4 Replies
View Related
Jun 24, 2007
I've read some reviews of eSata external drives and it seems to be better than FW800. What are the odds Apple is gonna include an eSata port on its next-gen iMac?
View 21 Replies
View Related
Dec 10, 2007
Does anyone have a clue if it is possible to connect an esata device to an iMac? I've seen usb to esata adapter but are they as fast? Is it worth it compared to firewire 800?I do hd video on my portable hdd, so i need something fast.
View 18 Replies
View Related
Jul 31, 2010
[URL]For $170, you can finally have an eSATA port!
View 2 Replies
View Related
Jun 2, 2009
How do you plug an Esata cable from an ext hd to an imac? Or is this even possible. If not how many firewire cables can you plug into an imac?
View 4 Replies
View Related
Jul 30, 2010
Like the title says, OWC aka Macsales.com is offering to drill an eSATA in your 2010 27" iMac for $169.
Awesome but Apple should have done this for $1
Blog.macsales.com
http://eshop.macsales.com/shop/turnkey/iMac_2010_27
View 24 Replies
View Related
Aug 1, 2010
Does anyone know if esata is as fast as the Internal version? If so I would be very interested in replacing my optical drive with a ssd and adding a esata for an external optical drive or another ssd. Would this work?
View 2 Replies
View Related
Mar 26, 2010
I have taken out the optical drive of my imac 7 and use its sata port on the motherboard to connect with the sata-esata cable. And then I connected the external hard disk to the esata.But neither the OS nor the Disk Utility saw the external harddisk. anyone here successfully done this before? Have I missed something?
View 2 Replies
View Related
Dec 9, 2007
I am kind of a newb to eSata technology. Is it possible to install a eSata port on am AL iMac? Has anyone done it?
View 24 Replies
View Related
Nov 19, 2010
My buddy and I just finished swapping the airport card for a mini pci-e sata card in his 2008 Imac and all is well. Unfortunately, we could not get it to show or mount anywhere on mine (2010). We tried everything. We loaded the raid drivers and the none raid. We tried both cards (his and mine) in my machine and still nothing. His Imac mounted his ssd immediately after installing the drivers. Could it be that the new logic boards do not support this type of card? Is there a special driver that I need for the i7? I was hoping this would add 2 more sata ports.
View 4 Replies
View Related
Feb 3, 2009
I would like to be able to boot to a ghost 2003 (dos environment basically) to be able to clone NTFS disks without having to go to a pc, but for some reason on the mac pro I can only boot into Windows PE environments or Linux environments boot disks. The ghost 2003 bootable cd just hangs and never loads.
View 5 Replies
View Related
Jun 1, 2012
I recently got this Mac Pro (Model number A1186, EMC 2113) with two Quad Core 2.66 GHz Intel Xeon 5150 processors, 16GB of RAM (both RAM riser slots completely filled with 4x2GB sticks of 667MHz DDR2 ECC FB-DIMM each), 2x1TB clean HDDs, and an ATI Radeon HD4870 (512MB DDR5 memory) video card with 2 DVI ports and an S-video port. (I bought the HD4870 later after I found that the one that came with it, an ATI X1900 XT, was part of a recall [sadly this recall ended in 2011.] Plus, the fans on the X1900 were revving up REALLY loud.)The reason I'm posting here is because the darn thing will not "boot." The machine starts up fine (HDDs spin up, lights on the RAM risers illuminate momentarily, etc.), but there is no output out of either of the DVI ports. Not even a gray Apple screen. I have tried the DVI cord and the monitor on two different machines and they both work perfectly fine, and now I have no other Mac available to test the video card on. I'll just have to assume for now that it works. The video card, after the machine is turned on, has three of the four diagnostic LEDs lighted.
The ones that light up are D1601, D1602, and D1603; the other one, D603, does not light up. After some searching around on Google for a little while and sifting through forum after forum, they all seemed to agree upon the fact that these lights were from the two internal power cables (D1602 and D1603) not being plugged in and that there was a critical temperature error (D1601). Note that a) both power cables are in both power slots and hooked in securely and b) these lights turn on immediately after pressing the power button. A light tug from both ends on both cables assures that these cables are not going anywhere soon, and I doubt that there would be such a heating issue as soon as I press the power button, especially since all the fans are running fine. My first thought was that maybe the logic board wasn't getting enough power, but I have no idea on how to check this as almost everything besides the RAM risers and the extension slots are covered by something.Another problem I found is that some of the diagnostic LEDs that should be lighting up, aren't. Out of all the lights, the ones that do light up are the TRICKLE light and the EFI light. I guess it's good that the CPU lights aren't lighting up, but what about the the GPU and POWER lights? Shouldn't those be lighting up too?I also tried booting up from a Snow Leopard disc (there isn't any internal CD/DVD drive [the previous owner removed it for whatever reason], so I've been using an external CD/DVD drive).
When I plugged in my Apple USB keyboard, I decided to press the caps lock key and see if it would light up green. No dice. I tried all 5 USB ports on the machine and none of them worked. But how did the CD/DVD drive work? It spun up when I turned the machine on. So since the keyboard can't be recognized I am unable to boot from a CD, or anything else for that matter.One more issue: there is no startup chime! Tried turning it off and on many different times trying some potential solutions out and not once was there a startup chime. I know for sure this is a huge issue.reconfiguring the RAM (which I inserted per Apple's instructions), resetting the SMC, resetting the PRAM (which wouldn't have worked anyways since the keyboard isn't recognized), and resetting the NVRAM (which, again, probably wouldn't have worked since the keyboard isn't recognized.)So here are my problems.
Info:
Mac Pro
View 14 Replies
View Related
May 27, 2012
My MacBook Pro just gave out the other day. When I turn it on, the optical drive spins and the light sensor adjusts the power light's brightness, but nothing else happens.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Feb 16, 2012
This is my first post here I hope somone can help me. I have a MBP from 2008 I upgraded to Lion about a month ago and had some minor issues right away, but now I can't get past the boot screen without a kernel panic. I did a time machine restore to one of my external drives and it boots up fine. I figured my internal drive was going bad so I installed a new one yesterday and the exact same Kernel Panic happens. I don't live in a city with an apple store so that isn't an option for me. I am contemplating going all the way back to leopard because the was the last os I can remember that was completely stable for me.
Info:MacBookPro, Mac OS X (10.7.3)
View 1 Replies
View Related
Mar 11, 2009
I'm currently saving my pennies for a new Mac Pro and a 24inch ACD.
For owners who game, is the ACD's 14-second response time a problem? Is there a lot of noticeable ghosting? I play mostly fps's (CS:S, Day of Defeat, CoD, etc...) so this is a big issue for me. I'm dead set on the LED ACD so this is the only potential issue that's might hold me back
View 2 Replies
View Related
Jan 2, 2010
I have a problem: when I restart my Early 2008 MacBook Pro there is no "chime" and the screen remains black. The keyboard doesn't light up or respond to any input, and worse still, the "lid button" light on the front of the notebook remains illuminated, it doesn't blink, it just stays on, shining in my face. I loaded a CD into the optical drive to see if I could use the keyboard to eject it, but this test failed. Now, when I turn on my MBP, I hear the optical drive spinning and the quiet whirr of the fan inside.
I looked on Apple's support website about what to do when a Mac refuses to boot. I tried all of the methods they listed, but since my Mac doesn't respond to keyboard input, all of the techniques failed. Having exhausted everything I could think of, I decided to post here hoping someone could suggest something. I was just on the verge of completing my portfolio website and I would like to salvage my data at least.
View 12 Replies
View Related
Jan 16, 2009
I have a new unibody Mac Book Pro and I'm waiting for the New Mac Pros to come out, I'm looking to purchase one of the new 24in LED Cinema for my MacBook Pro but I was wondering do you guys think that the new graphic Cards in the upcoming Mac Pros will have a Mini Display port on them so I may use the 24in with the Mac Pro also?
View 6 Replies
View Related
Apr 13, 2012
I get a grey-white vertical lines screen. Happens a lot when playing flash games online. Updated flash player already.
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Feb 11, 2010
Desperate to replace my now too old G5 power Mac, I decided to order a new 27in i mac. I was cheerfully informed by the assistant in my local mac shop that I would have to wait six weeks or so and he would put me on a waiting list. I felt this was unreasonable and thought I had found a clever plan to get something better.So I bought a new 24in display, attached it to my newish laptop and away we went. After a short while I found the whole experience a little lumpywith six connections every time I wanted to take the laptop home. I bought a used power Mac instead, an intel duel 2.66 power mac. I have found out today that according to Apple that there is no connection to be made from the mac to the display, I am gutted and fed up. The display has a bunch of cables coming out, only one choice, mini DV1. The computer has DVI. No adapter is available apparently. Anyone have any suggestions apart from spending nearly ?300 on a Radeon 4870
View 11 Replies
View Related
