I recently purchased a 2010 Mac Pro 2.8 quad and installed vista 64 via boot camp. It just doesn't seem to recognize any wireless connection as if the airport card isn't even installed. I checked device manager and it shows that the network controller does not have any drivers installed. I have never had any issues connecting wireless with the 2010 mac mini or previous macs.
View 12 Replies
I play Age of Empires iii on Mac OS X and it plays online perfectly with very little if any lag.
I installed winows vista ultimate (32 bit) and play Age of the Empires iii in windows. However, the game lags, usually when there is artillery or ships. Whenever I start the game, it displays the message --- you have a 32 mb video card, the game requires 64 mb to play -- attempt to run or cancel (i do not get this message in mac os x).
I have a 2.16 core duo, 2 gb ram and an intel GMA 950 -- VRAM 64 MB shared system memory video card. I do not understand why I get this message in Windows. Is windows not detecting the video card properly?
Just bought a Mac Pro and tried to install Vista64 Ultimate. But after partitioning BootCamp won't recognize the Vista64 CD.
View 12 Replies View Relatedi am about to install windows vista via bootcamp on my new imac and i was just reading on apples install guide to only install windows 32bit... but the version i bought is 64bit cause in a previous thread i asked what u should install and someone said 64bit... is it ok to install it? what should i do... if i anyone can answer this quickly it would mean alot i want to install it asap!
View 12 Replies View RelatedI searched everywhere and didn't find an answer.
I currently have Vista Business installed in Bootcamp. Will I have problems if I try to install Windows 7 over the top of it, or should I delete Vista and the partition and start over clean?
I want to know if it is possible to install windows XP or Vista over Windows 7 that has been installed via Bootcamp. I am currently using OS X Lion 10.7.3.
View 5 Replies View Relatedim having trouble installing bootcamp and drivers on vista for my macbook. i installed vista without problems but when i put my leopard disc in it doesnt not run the bootcamp installer instead it goes into a macbook air installer and asks for me to connect to a macbook air. what is wrong? i have done it before so i dont know why i cant do it now. should i do everything all over again?
View 2 Replies View RelatedI'm running Windows Vista Ultimate using Bootcamp. It runs fine with just a couple of anomalies.
First is that the sound quality is quite poor...almost like AM radio...I've tried installing the latest Realtek drivers but it's made no difference. I've stuck it onto "Rock" preset and that has improved things slightly but I was wondering if there was a proper fix for this?
Also, even though Vista see's that I have dual processors and correctly reports them (and I get two CPU usage graphs under task manager) applications such as dBpoweramp don't see it and run in single processor mode? Aga
I'm running a 24" 2.8GHz iMac with 4GB Ram.
Right now I'm running Vista Ultimate 32bit in bootcamp and am ready for a change. What I would ideally like to do is to switch over to Win7 64bit (in order to utilize my 4gb of ram) without having to reinstall all of my windows applications and games. Right now I'm really looking for the easiest and most efficient way of doing this (assuming it's possible to transfer between a 32 and 64bit operating system).
What I had planned was to do things in this order:
1) Clone my bootcamp partition to my external hard drive using winclone.
2) Erase my bootcamp partition
3) Install Win7 to the bootcamp parition
4) Use the Windows Easy Transfer tool to migrate all of my vista files from the external hard drive over to Win7
5) Hopefully enjoy a much improved OS with all my programs fully functional
Please tell me if I have neglected something or if there are any potential problems along the way. If it maters I have an early 2008 Macbook Pro, 2.5ghz, 4gb ram, 8600m 512mb.
I got this .iso folder of Windows Vista Ultimate and he needs me to burn it on to a dvd. I tried once before but it didnt work. This is what i did: Made a new burn folder. Opened the .iso Dragged everything into the burn folder. Burned. Didn't work. Does anyone have an idea on how to burn this .iso folder on to a Clean DVD?
View 4 Replies View RelatedI have Windows Vista Ultimate installed on my MacBook. For some reason, everything keeps freezing and the mouse pointer remain unresponsive for a few seconds. This happens again and again while I am using Windows and it's very annoying. Sometimes I have to press to power button for 5 seconds to restart the computer otherwise it remains completely blocked.
View 2 Replies View RelatedI've followed the Bootcamp procedure correctly, but when I load my Vista Ultimate disk all I get is a blank screen. I've left it for a while, but even after half an hour still nothing.
What could the problem be, any tips?
It is a MacBook and 32 bit Vista if that if of use.
I have a 2010 13" MacBook Pro. I bought a FW800 enclosure for my 500GB Seagate 5400rpm HD. In OSX using Path Finder to test transfer speeds I get around 40MB/s. Pretty good. Not as fast as it should be given the drive and FW800's possible speeds, but acceptable. When I switch over to my boot camp partition with Vista Ultimate installed I get 4MB/s. I can't figure out why I'm getting such slower speeds with Vista. I did the tests using the exact same files. So what am I missing? How can I get the transfer speeds I should be getting in Vista?
View 9 Replies View RelatedI have a 2010 15" MacBook Pro 2.4 i5 that I am trying to install Windows 7 on using BootCamp. I have installed a partition using BootCamp of 45GB but once it prompts me to insert the Windows disk, I insert it but after a few seconds the machine ejects the disk without ever mounting or seemingly recognizing the disk.
I am trying to install Windows 7 Ultimate 64bit from a disk.
Can anyone offer any insight or help me figure out what the problem is? I have already tried rebooting and that doesn't work.
Just updated to 3.2 and now my trackpad won't work like it used to. I used to be able to tap with one finger and drag the cursor with the other to select multiple items, now it won't let me do this anymore. Was the update intended for some other Win OS or what?
View 9 Replies View RelatedI have a new Macbook Pro. I installed Windows 7 Ultimate and Microsoft Office Pro with Bootcamp. I run these with Parallels desktop. Since I am using Parallels, 7, and Office, do I need an antivirus? If yes, which is the best route to go?
Info:
MacBook
Pro, Mac OS X (10.7.4), Windows 7 Ultimate, Office 2010 Pro
Having a problem installing a 64bit version of Vista via bootcamp on my 2006 Mac Pro. I can partition the drive just fine, but when I go to install the software, the computer reboots and seemingly attempts to boot of of the CD. I get a black screen with the following prompt:
1.
2.
Select CD-ROM Boot Type:
However I am unable to type either 1 or 2 in.
Question - how do I get started? I currently have Vista loaded on my BootCamp partition. Do I launch Vista, and run the Windows7 upgrade installation from Windows? Or do I do this from BootCamp?Note that this is an upgrade disc, not a full/initial install version.
View 1 Replies View RelatedI searched the forums and came up with nada, so I thought I'd ask. Has anyone taken advantage of Microsoft Ultimate Steal to buy Office 2007 Ultimate? If so, it is the full version and not the upgrades correct? I just want to make sure before I invest. I have iWork, but need to be able to work w/Office in my Windows 7 Bootcamp partition.
View 1 Replies View RelatedDoes anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done;
1.Open up bootcamp assistant
2.Partition, divide equally(116GB each)
3.Insert Vista disk and start installation
4.Install Vista and insert CD key
5.custom installation
6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
I was wondering if you can install a version of Windows Vista without the service pack one built into it. I am planning on getting the old Windows Vista Home Basic without the sp1 because it is cheaper to buy. Can I install that on the mac using bootcamp and then upgrade to sp1 after the installation?
View 1 Replies View RelatedLast night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
I just bought a 4GB macbook pro and need to install Windows Vista Business for school because I am an engineering Student starting this fall and my school requires it. how much space to partition for windows. I will be using Windows for school related purposes including Microsoft office and engineering programs such as Matlab but everything else i.e. my photos, music, etc. will be be on the Mac OS. How much space would you recommend I partition for Windows?
View 2 Replies View RelatedI want to install windows vista on my macbook pro 4,1, I bought it second hand and the seller didn't have the 2 install discs. I need these after installation of windows to install the drivers, but as I don't have them is there another way of installing them?
View 2 Replies View RelatedI installed Vista into my mac pro without going through bootcamp so i don't have have an mac OS installed but now my question is..
do i just need to load a mac OS cd and boot from that and i would be able to installed over my Vista installation and install the mac OS?
Is it possible to install Windows on its own hard drive or with Boot Camp are we forced to install it on a partition on the startup OS X disk? I tried to install it on an empty 250GB HD with Boot Camp, but when the system restarted to install Windows, it asked me to choose a CD ROM and gave me the option of 1 or 2. When I pressed either 1 or 2 nothing happens. It remains stuck on that prompt. By the way, I only have 1 CD/DVD ROM drive in my MacPro.
View 5 Replies View RelatedWhat Windows OS is best? I want something that works give me long (as possible) battery life and doesn't take too much space.
View 15 Replies View RelatedI installed Windows Vista on Bootcamp and left it running overnight last night in Windows and it appears the computer had restarted. I turned on the monitor and saw the login prompt for Mac OS. Any ideas on why it might be restarting? I'm guessing the computer went to sleep while I was in bed and had some issue there.
View 4 Replies View RelatedDoes smcFanControl would able to control the fan at same rpm before boot up into vista? When I changed the rpm of fan to higher (3,000 rpm) under Mac OS X then boot up into Vista then it would be same rpm (3,000 rpm) what I was set or force back to default (back to 1,200 rpm)?
View 19 Replies View RelatedI have a late 2008 (the brand new) Macbook Pro 2.53 C2D and I installed vista on a partition succesffuly. But once I try to install Boot Camp drivers, it doesn't work. I open up the leopard DVD, and it starts installing all the network cards and video cards, but then it gets to "KeyAgent" and it says it failed to install because I it couldn't access startup services. I pressed ignore, then it came to "MacHal" (i think, somehting like that) and it said the same thing. I looked under my account privelges, and I'm an administrator with access to everything, so I'm not sure what's going on.
View 13 Replies View Related
