I was wondering if you can install a version of Windows Vista without the service pack one built into it. I am planning on getting the old Windows Vista Home Basic without the sp1 because it is cheaper to buy. Can I install that on the mac using bootcamp and then upgrade to sp1 after the installation?
View 1 RepliesDoes anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done;
1.Open up bootcamp assistant
2.Partition, divide equally(116GB each)
3.Insert Vista disk and start installation
4.Install Vista and insert CD key
5.custom installation
6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
i am about to install windows vista via bootcamp on my new imac and i was just reading on apples install guide to only install windows 32bit... but the version i bought is 64bit cause in a previous thread i asked what u should install and someone said 64bit... is it ok to install it? what should i do... if i anyone can answer this quickly it would mean alot i want to install it asap!
View 12 Replies View RelatedI recently purchased a 2010 Mac Pro 2.8 quad and installed vista 64 via boot camp. It just doesn't seem to recognize any wireless connection as if the airport card isn't even installed. I checked device manager and it shows that the network controller does not have any drivers installed. I have never had any issues connecting wireless with the 2010 mac mini or previous macs.
View 12 Replies View RelatedI searched everywhere and didn't find an answer.
I currently have Vista Business installed in Bootcamp. Will I have problems if I try to install Windows 7 over the top of it, or should I delete Vista and the partition and start over clean?
I just bought a 4GB macbook pro and need to install Windows Vista Business for school because I am an engineering Student starting this fall and my school requires it. how much space to partition for windows. I will be using Windows for school related purposes including Microsoft office and engineering programs such as Matlab but everything else i.e. my photos, music, etc. will be be on the Mac OS. How much space would you recommend I partition for Windows?
View 2 Replies View RelatedI want to install windows vista on my macbook pro 4,1, I bought it second hand and the seller didn't have the 2 install discs. I need these after installation of windows to install the drivers, but as I don't have them is there another way of installing them?
View 2 Replies View RelatedI want to know if it is possible to install windows XP or Vista over Windows 7 that has been installed via Bootcamp. I am currently using OS X Lion 10.7.3.
View 5 Replies View Relatedim having trouble installing bootcamp and drivers on vista for my macbook. i installed vista without problems but when i put my leopard disc in it doesnt not run the bootcamp installer instead it goes into a macbook air installer and asks for me to connect to a macbook air. what is wrong? i have done it before so i dont know why i cant do it now. should i do everything all over again?
View 2 Replies View RelatedI have successfully installed Windows Vista Home Premium on my MBA through Boot Camp. I have tried to install the MBA drives from the OS X install disk repeatedly, but without success. The "setup.exe" seems to be working fine, but after restart, Windows does not seem to recognize the Mac drives. Updating the drives manually did not improve the situation. Does anyone know how to install the drives correctly?
View 1 Replies View RelatedThis is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
I want to install 64-bit Vista on a 1st Generation Mac Pro. Should I expect any roadblocks as far as drivers go?
My video card is the 7300 GT and I am working with a standard aluminum Apple keyboard and a Microsoft mouse. The only thing I expect to have trouble with is my external iSight, but I don't really need that on the Windows side.
I am planning on putting Vista on the new 13 inch white Macbook, and I wanted to know if it fulfills all the system requirements. Here are the requirements:
2.0 GHz Intel Core 2 Duo
4GB 667MHz DDR2 SDRAM - 2x2GB
320GB Serial ATA Drive @ 5400 rpm
SuperDrive 8x (DVD-R DL/DVD-RW/CD-RW)
Having a problem installing a 64bit version of Vista via bootcamp on my 2006 Mac Pro. I can partition the drive just fine, but when I go to install the software, the computer reboots and seemingly attempts to boot of of the CD. I get a black screen with the following prompt:
1.
2.
Select CD-ROM Boot Type:
However I am unable to type either 1 or 2 in.
i just installed vista home premium. everything seems to work fine except for my internal speakers it says that they are installed but they don't work. the name that shows up is high definition audio device.
View 1 Replies View RelatedQuestion - how do I get started? I currently have Vista loaded on my BootCamp partition. Do I launch Vista, and run the Windows7 upgrade installation from Windows? Or do I do this from BootCamp?Note that this is an upgrade disc, not a full/initial install version.
View 1 Replies View RelatedIs it possible to install the Windows Vista home premium Lite OS on a MacBook? Think it would be nice to save some precious HD space for other purposes.
View 2 Replies View RelatedI have successfully striped two SSDs in Vista Business-64 on my MacPro1,1. I have used Vista's data carrier administration program for this. As expected the array isn't recognized in OS X. So I cannot just dump a Winclone image on the array. That would have been much to nice!
My next strategy was a total backup with Vista's own backup program on another HDD. That went without a hitch. I then hoped that booting the Vista install DVD with the backup drive present and the RAID0 array would allow me to restore the backup on the RAID array. Unfortunately Vista will not recognize the array running of the install DVD. Loading AHCI or IMSM drivers will not change this situation.
It appears that you have to make the dynamic data carrier active if you want to install Vista on it. Unfortunately the data carrier admin program will not let me do this. I would do it in DISKPART if I knew it was possible and how to do it.
So the question is does anybody know how to install Vista Business to a dynamic data carrier? If I cannot figure out this soft RAID0 I will ave to buy a RAID controller which I thought I might avoid at this point.
Is it better for me to buy the upgrade for windows 7, from vista to windows 7 or to buy the full copy? If i buy the fully version, should i get rid of my pardon, and re-do it with bootcamp, or should i just do it over my current pardon? (Vista) I just want the best way, less pain, less anger. Im willing to pay more for full IF IT IS THE BEST way to do it.
View 1 Replies View RelatedI'm running Windows vista ultimate on my Imac and lately the mouse started acting weird on Vista, it's jumping around and moving unpredictable,and also i use windows in spaces, and i can't switch to spaces anymore until i click control + command, please let me know what the problem is, ohh i'm running a USB G9 Logitech mouse.
View 1 Replies View RelatedI have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
I installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista.
On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
I recently installed Windows vista using going through parallels because my bootcamp failed a while ago. This partition also acts as my bootcamp. Well The internet on parallels works fine because it is using osx network, but when i boot into bootcamp the network drivers seem to be missing. I cant figure it out, but it says the ethernet and network drivers are not there. I cant find the drivers on the internet anywhere and when i use the vista disk i have it still does not want to install them.
View 2 Replies View RelatedI just bought a new MacBook pro 1 week old. I partioned my hard drive and installed a clean copy of Windows Vista Ultimate on one side. I then downloaded skype, but my internal microphone will not work. I tried everything. Can someone help me out with this issue.
View 3 Replies View RelatedLast night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
I've installed the drivers, and when I start up in Windows, neither the internet or the wireless pick up.
Using Windows Vista Home Premium. The little wireless icon in the tray just has the big X, so it's literally picking up nothing. I also can't connect via ethernet.
I just finished up a fresh install of Windows 7 and downloaded and installed the NVidia driver from their site directly since the one in the Boot Camp files is pretty old and technically the Vista driver anyway.
But I still need the Brightness, Sound, etc key functionality. Is there a way to selectively install Boot Camp drivers? That's the only one I need. The wireless, chipset, video and everything else works just fine (and in some cases better) than the ones included in Apple's setup.
im about to install windows on my macbook via bootcamp. However, i will use the same partition for parallels, which means that my ram is goign to be damaged. I wanted to know which os did u recomment me to install. Does windows 7 hog more cpu and ram than vista?
View 13 Replies View RelatedI'd appreciate it if anyone could offer me some advice on whether to go with the 32bit or 64bit version of Vista on a 4-core 'Nehalem' Mac Pro. I've read that some drivers will fail to work under this version of the operating system - is this the case for the hardware in the Mac Pro (particularly the HD 4870)?
View 6 Replies View Related