im having trouble installing bootcamp and drivers on vista for my macbook. i installed vista without problems but when i put my leopard disc in it doesnt not run the bootcamp installer instead it goes into a macbook air installer and asks for me to connect to a macbook air. what is wrong? i have done it before so i dont know why i cant do it now. should i do everything all over again?
View 2 Replies
I want to know if it is possible to install windows XP or Vista over Windows 7 that has been installed via Bootcamp. I am currently using OS X Lion 10.7.3.
View 5 Replies View RelatedI have a late 2008 (the brand new) Macbook Pro 2.53 C2D and I installed vista on a partition succesffuly. But once I try to install Boot Camp drivers, it doesn't work. I open up the leopard DVD, and it starts installing all the network cards and video cards, but then it gets to "KeyAgent" and it says it failed to install because I it couldn't access startup services. I pressed ignore, then it came to "MacHal" (i think, somehting like that) and it said the same thing. I looked under my account privelges, and I'm an administrator with access to everything, so I'm not sure what's going on.
View 13 Replies View RelatedSo i'm at work installing Vista via bootcamp on my newer Macbook Pro and I don't have my OSX disk. Where else can I get the drivers?
View 2 Replies View Relatedi am about to install windows vista via bootcamp on my new imac and i was just reading on apples install guide to only install windows 32bit... but the version i bought is 64bit cause in a previous thread i asked what u should install and someone said 64bit... is it ok to install it? what should i do... if i anyone can answer this quickly it would mean alot i want to install it asap!
View 12 Replies View RelatedI recently purchased a 2010 Mac Pro 2.8 quad and installed vista 64 via boot camp. It just doesn't seem to recognize any wireless connection as if the airport card isn't even installed. I checked device manager and it shows that the network controller does not have any drivers installed. I have never had any issues connecting wireless with the 2010 mac mini or previous macs.
View 12 Replies View RelatedI searched everywhere and didn't find an answer.
I currently have Vista Business installed in Bootcamp. Will I have problems if I try to install Windows 7 over the top of it, or should I delete Vista and the partition and start over clean?
realised that my previous post was in the wrong section, (sorry!) so i decided to re-post it in the correct place.
Ok, so i setup bootcamp and installed windows xp. installed the bootcamp drivers, and things worked fine for a couple of days.... than the bootcamp appeared to get corrupted. fn keys cant work, xp cant detect mac partition (cant access any files in there, though the reverse works), no bootcamp icon in system try. someone mentioned to search for the KbdMgr.exe or bootcamp and start the program, but i cant find both items.
re-installation of bootcamp with the cd doesnt seem to work for me. either the system restarts before installation is completed, or xp crashes during the installation process. EDIT: now all i get is xp crashing before installation is complete
downloaded the bootcamp 2.1 but absolutely nothing happens when i click on the exe file!
there are a bunch of apple drivers shown in the add/remove programs, but they dont seem to be working (tried to remove them all and re-install, but xp crashed halfway and i had to use the cd to repair it). seems to me all that the drivers are 'there' already, but not working.
short of completely starting over from scratch and re-installing the entire windows, is there anything else i can try?
I just got everything brand new again: a Macbook and Windows XP SP3 integrated CD.
I installed Windows and I am now struggling to install the bootcamp drivers.
I run the 2.1 installer and nothing happens at all. nada, no error messages etc.
I presume that this is some problem with SP3, but I have SP3 integrated so I can't install SP2 , install bootcamp and then install SP3, unfortunately..
I've tried three times to install Bootcamp drivers on my Windows 7 partition and all times have failed with a mini BSOD that says "A problem has been detected and windows has been shut down to prevent damage to your computer" a couple seconds after it's done installing the ATI drivers and it's just a green bar with no text above it. I couldn't read the rest of the BSOD because it goes away in 2 seconds. Any help/fix for this would be appreciated. I'm thinking of just reinstalling the 2.0 drivers but I really want access to my Mac side while in Windows.
View 2 Replies View RelatedI've bought and installed into my computer the NVidia GeForce GTX 285 1GB for Mac, it's a great card, I'm on Windows 7 at the moment, if I install the WHQL 186 drivers, will it affect anything on the Mac side? does it manipulate the card or do anything that would make it windows only or damage it etc..?
This is the link: [URL]
I just finished with the installation of windows XP SP2 on my MacBook Air, it all went fine.. but at the moment when I inserted my Leopard disk in order to install the drivers, the screen turned blue and the computer rebooted by itself in a matter of seconds. I've tried 3 times by now and keep doing the same.
View 6 Replies View RelatedI just installed Windows XP SP2 on my iMac and when I tried installing the Boot Camp disk my computer crashes in a blue screen then immediately restarts.
View 5 Replies View Relatedso i just installed bootcamp windows 7 ultimate 7600 x86 retail on 100gb partition and for some reason when i try to install the bootcamp drivers off the install OSX cd it brings up a installer assistant for remote macOSX install and macbook air cd/dvd sharing (it looks like as if its recognizing my mbp as a mba). so that didnt work. im trying to install boot camp update 2.1 for windows vista 32 bit and thats not opening up to install....the only things ive installed so far are the nvidia 9M series drivers.
View 2 Replies View RelatedSo I got windows 7 installed on my 2010 mbp but when I went to install my windows drivers via my Mac osx disc I realixed I couldnbt find it.
Is there anyway to install all the drivers/apple software without my OSX disc? If not, how do I go about getting a replacement disc from apple?
I searched for a while trying to find the answer but did not find it. I just installed Vista Business via Bootcamp. I am not able to access the internet or anything. If I read the help stuff right I need to use the OSX install disk to install the drivers. The problem is, I don't have the install disk. Is there any other way to get the drivers? Or am I just missing something easier?
View 5 Replies View RelatedI left my Leopard Discs at home and will be away for about a month. I installed Vista but do not have the correct Boot Camp drivers. I was wondering if anyone knows where to find the newest drivers. I need the ones from the disc that came with the computer if anyone can put a link or upload them. Tried Boot Camp 2.0 and update from April to 2.1. Does not have the correct display drivers, trackpad, and network drivers.
View 6 Replies View RelatedI have a Macbook plastic, 2.4 GHz intel core 2 Duo with 2 GB of ram.My Mac is currently running on OS X, i used to have a 40 gig partition Windows XP, a couple of friends of mine where talking about how much they liked Windows 7 and finally i had had enough blue screens to say, sure ill switch, why not?... assuming it would not take longer then lets say a day at most, i set off on my quest.
FWI, im running an older model Macbook that was bought refurbished (not sure if that has anything to do with my problem). anyway i removed my previous partition, then using Boot Camp Assistant i repartitioned a 40 gig section for Windows 7. Then ran the installer. I have a copy of Windows 7 ultimate 86x. The Windows boot screen turned up, i had to reformat the partition so that i could install, no problems there. after all said and done the installation worked perfectly, up to a point... First problem that appeared was the lack of sound. i fixed that by downloading Realtek's High Def sound drivers.
Then it was the rest of the drivers for the macbook. heres where i run into my problem, i have the Mac OSX install discs 1 and 2. inserting the first disc the option of the auto run of the setup popped up i clicked run. and instead of the same old install drivers option all i have is the option to install the software that lets macbook airs share cd/dvd drives... needless to say i got frustrated and to put it lightly pissed off...
unsure of wtf was going on i looked it up online and really couldnt find anyone with the same problem, i found a web page saying that i should have the windows auto update itself and that should fix the problem. it did not. i dont know what the hell is going on. and im about this close to reinstalling windows xp and telling windows 7 to go **** itself...
I recently installed the 64 bit Windows 7 Ultimate operating system onto my MacBook Pro 13 inch. I have the most basic Macbook Pro 13 inch with nothing fancy added. Whenever I load up the Windows 7 OS on my Macbook, it never utilizes or even realizes that I have the NVIDIA graphics card in my laptop. It instead believes I have some integrated graphics card that cannot even run the most basic of PC games. I know my laptop can run these games because on OSX it runs multiple games with higher requirements than these games I am trying to run on Windows.
Basic question: How do I get bootcamp or whatever else to make Windows 7 realize I have a NVIDIA card and drivers. Sorry if I am coming off as stupid or confusing.
Well I finally got the drivers off of the MBA install DVD (URL). Just dumped them on to a USB stick. I installed XP Pro again using bootcamp assistant without a hitch. Rebooted into XP, put the USB stick in and ran the setup.exe off of it. XP blue screened when installing Broadcam drivers it appears.
View 10 Replies View RelatedHaving a problem installing a 64bit version of Vista via bootcamp on my 2006 Mac Pro. I can partition the drive just fine, but when I go to install the software, the computer reboots and seemingly attempts to boot of of the CD. I get a black screen with the following prompt:
1.
2.
Select CD-ROM Boot Type:
However I am unable to type either 1 or 2 in.
I just finished up a fresh install of Windows 7 and downloaded and installed the NVidia driver from their site directly since the one in the Boot Camp files is pretty old and technically the Vista driver anyway.
But I still need the Brightness, Sound, etc key functionality. Is there a way to selectively install Boot Camp drivers? That's the only one I need. The wireless, chipset, video and everything else works just fine (and in some cases better) than the ones included in Apple's setup.
I recently installed Windows vista using going through parallels because my bootcamp failed a while ago. This partition also acts as my bootcamp. Well The internet on parallels works fine because it is using osx network, but when i boot into bootcamp the network drivers seem to be missing. I cant figure it out, but it says the ethernet and network drivers are not there. I cant find the drivers on the internet anywhere and when i use the vista disk i have it still does not want to install them.
View 2 Replies View RelatedQuestion - how do I get started? I currently have Vista loaded on my BootCamp partition. Do I launch Vista, and run the Windows7 upgrade installation from Windows? Or do I do this from BootCamp?Note that this is an upgrade disc, not a full/initial install version.
View 1 Replies View RelatedWhat Windows OS is best? I want something that works give me long (as possible) battery life and doesn't take too much space.
View 15 Replies View RelatedI have a few issues with device support I thought I ping this community about:
1) Wireless Adapater doesn't show up in Device Manager (and doesn't work of course)
2) iSight, Network Controller and Performance counters all have (i) issues in Device Manager (update driver online doesn't work)
3) Resolution maxes out at 1280x800 (me thinks this is because it thinks the monitor is a generic PnP monitor)
Any ideas on where to get the proper drivers? I did the bootcamp stuff using the latest and greatest with the new MacOS.
I tried to install Vista business edition 32-bit (without SP1) on my Unibody Macbook Pro (late 2008 model). After that, I installed
1) Bootcamp 2.0 from a retail Leopard DVD and its upgraded version (2.1)
2) nForce 730i driver (from NVIDIA web site)
3) Geforce 9000M series graphics card driver (from NVIDIA web site)
Currently there are still several driver issues:
1) "Network Controller" driver is not working.
2) "Apple iSight" driver is not working.
3) No wireless device shown up in my device manager.
4) No sound.
I don't have my original MacOSX DVD with me. Does anybody know how to fix those problems?
So I installed Vista and then popped in the OS X Disc 1 to install the drivers, like I did with Win XP before. All I get on screen is the window where I get to choose whether to install OS X on my MBAir or install disc sharing....no drivers.
Do i need a specific version of Vista to be able to install boot camp drivers ? SP1 or SP2 maybe ?
I remember I had the same issue with Win XP SP3, which seemed weird since it's supposed to be even more complete then the previous version, right ?
I just installed Windows Vista x64 on my 2.4Ghz Unibody Macbook this morning for some software development, and I accidently left my install DVD at home - I'm at college right now. Is there any site I can download the drivers for from? Or could somebody possibly send me a link to a download? I tried the 2.1 download on Apple's website, but it doesn't start up.
View 8 Replies View RelatedI play Age of Empires iii on Mac OS X and it plays online perfectly with very little if any lag.
I installed winows vista ultimate (32 bit) and play Age of the Empires iii in windows. However, the game lags, usually when there is artillery or ships. Whenever I start the game, it displays the message --- you have a 32 mb video card, the game requires 64 mb to play -- attempt to run or cancel (i do not get this message in mac os x).
I have a 2.16 core duo, 2 gb ram and an intel GMA 950 -- VRAM 64 MB shared system memory video card. I do not understand why I get this message in Windows. Is windows not detecting the video card properly?
