Windows On Mac :: Low Sound Quality In Vista Ultimate?
Jun 9, 2008
I'm running Windows Vista Ultimate using Bootcamp. It runs fine with just a couple of anomalies.
First is that the sound quality is quite poor...almost like AM radio...I've tried installing the latest Realtek drivers but it's made no difference. I've stuck it onto "Rock" preset and that has improved things slightly but I was wondering if there was a proper fix for this?
Also, even though Vista see's that I have dual processors and correctly reports them (and I get two CPU usage graphs under task manager) applications such as dBpoweramp don't see it and run in single processor mode? Aga
I'm running a 24" 2.8GHz iMac with 4GB Ram.
View 1 Replies
ADVERTISEMENT
Aug 28, 2010
I recently purchased a 2010 Mac Pro 2.8 quad and installed vista 64 via boot camp. It just doesn't seem to recognize any wireless connection as if the airport card isn't even installed. I checked device manager and it shows that the network controller does not have any drivers installed. I have never had any issues connecting wireless with the 2010 mac mini or previous macs.
View 12 Replies
View Related
Jun 7, 2009
Right now I'm running Vista Ultimate 32bit in bootcamp and am ready for a change. What I would ideally like to do is to switch over to Win7 64bit (in order to utilize my 4gb of ram) without having to reinstall all of my windows applications and games. Right now I'm really looking for the easiest and most efficient way of doing this (assuming it's possible to transfer between a 32 and 64bit operating system).
What I had planned was to do things in this order:
1) Clone my bootcamp partition to my external hard drive using winclone.
2) Erase my bootcamp partition
3) Install Win7 to the bootcamp parition
4) Use the Windows Easy Transfer tool to migrate all of my vista files from the external hard drive over to Win7
5) Hopefully enjoy a much improved OS with all my programs fully functional
Please tell me if I have neglected something or if there are any potential problems along the way. If it maters I have an early 2008 Macbook Pro, 2.5ghz, 4gb ram, 8600m 512mb.
View 6 Replies
View Related
Jun 30, 2009
I got this .iso folder of Windows Vista Ultimate and he needs me to burn it on to a dvd. I tried once before but it didnt work. This is what i did: Made a new burn folder. Opened the .iso Dragged everything into the burn folder. Burned. Didn't work. Does anyone have an idea on how to burn this .iso folder on to a Clean DVD?
View 4 Replies
View Related
Jan 23, 2010
I have Windows Vista Ultimate installed on my MacBook. For some reason, everything keeps freezing and the mouse pointer remain unresponsive for a few seconds. This happens again and again while I am using Windows and it's very annoying. Sometimes I have to press to power button for 5 seconds to restart the computer otherwise it remains completely blocked.
View 2 Replies
View Related
Mar 9, 2009
I've followed the Bootcamp procedure correctly, but when I load my Vista Ultimate disk all I get is a blank screen. I've left it for a while, but even after half an hour still nothing.
What could the problem be, any tips?
It is a MacBook and 32 bit Vista if that if of use.
View 3 Replies
View Related
Apr 10, 2009
I play Age of Empires iii on Mac OS X and it plays online perfectly with very little if any lag.
I installed winows vista ultimate (32 bit) and play Age of the Empires iii in windows. However, the game lags, usually when there is artillery or ships. Whenever I start the game, it displays the message --- you have a 32 mb video card, the game requires 64 mb to play -- attempt to run or cancel (i do not get this message in mac os x).
I have a 2.16 core duo, 2 gb ram and an intel GMA 950 -- VRAM 64 MB shared system memory video card. I do not understand why I get this message in Windows. Is windows not detecting the video card properly?
View 4 Replies
View Related
Nov 9, 2010
I have a 2010 13" MacBook Pro. I bought a FW800 enclosure for my 500GB Seagate 5400rpm HD. In OSX using Path Finder to test transfer speeds I get around 40MB/s. Pretty good. Not as fast as it should be given the drive and FW800's possible speeds, but acceptable. When I switch over to my boot camp partition with Vista Ultimate installed I get 4MB/s. I can't figure out why I'm getting such slower speeds with Vista. I did the tests using the exact same files. So what am I missing? How can I get the transfer speeds I should be getting in Vista?
View 9 Replies
View Related
Aug 3, 2010
I have installed Windows 7 Ultimate on iEmulator V (Virtual Machine) and everything is fast and awesome but there is no sound! I think it's a driver issue as Ubuntu on iEmulator V works fine but I don't know how to get drivers! I have tried some realtek stuff but that hasn't worked!
View 1 Replies
View Related
Nov 29, 2009
I searched the forums and came up with nada, so I thought I'd ask. Has anyone taken advantage of Microsoft Ultimate Steal to buy Office 2007 Ultimate? If so, it is the full version and not the upgrades correct? I just want to make sure before I invest. I have iWork, but need to be able to work w/Office in my Windows 7 Bootcamp partition.
View 1 Replies
View Related
Sep 23, 2010
I recently got my new iMac 27" i7 and I have successfully installed Windows XP via Boot Camp. I have everything up and running except I believe there's a sound quality issue. When I play music on the Mac OS side it seems very clear and precise. However, when music is played via Windows the sound seems to have deteriorated, almost hollow or more muffled?
Has anybody else experienced this? Is this normal for Windows or this a driver issue?
View 1 Replies
View Related
Sep 24, 2009
Last night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
View 1 Replies
View Related
Jul 29, 2008
Just bought a Mac Pro and tried to install Vista64 Ultimate. But after partitioning BootCamp won't recognize the Vista64 CD.
View 12 Replies
View Related
Nov 13, 2009
i recently installed a copy of windows vista basic and noticed that i couldn't get sound even after i installed all the drivers on the boot camp cd, i also tried installing the realtek drivers but that doesnt seem to have helped, when i go to the control panel it says that i have a week sound coming out of the speakers but i cant even here that.
View 2 Replies
View Related
Nov 18, 2008
Been using my new iMac now for a while, very impressed. Only problem i have had so far is the terrible sound quality experienced when using Windows via Bootcamp. The sound sounds very muffled or flat.
Have searched in numerous locations and the only answer found has been to install new realtek drivers. Even after doing this and fiddling with the EQ settings not much changes.
So my question is, has anybody had this problem and managed to fix it. After searching, there never seems to be a straight answer with a solution of what works and what doesn't. Any help would be greatly appreciated.
BTW im using a 24" iMac, 3.06, with Windows XP SP3 fully updated.
View 3 Replies
View Related
Feb 4, 2009
I installed vista on my macbook used Parallels, but my problem is the sound not active in the windows vista. Could anyone help me to activate the sound in my windows vista?
View 2 Replies
View Related
Feb 6, 2010
there i have a macbook pro and i have recently installed windows vista 32 on it using boot camp. also recently i have updated boot camp to 3.1 and my sound seems to have stopped working.
Although the red light in my headphone jack is gone my speaker icon on the right hand corner has a x on it and i cannot hear anyhting now. i have cheaked my sound driver and it is up to date cirrus logic cirrus logic cs4206a
View 11 Replies
View Related
May 9, 2009
I'm trying to get full 5.1 surround out of my Quad 2.93 when playing games in 64-bit Vista Ultimate. I want to send the multichannel audio from e.g. Left 4 Dead over optical TOSLINK to my Logitech Z-5500 speakers. Currently when I try this the computer only outputs stereo sound. I haven't encountered any definitive answers on how to get real time surround to work, but I have found the following information.
The onboard sound chip is some sort of Realtek HD Audio. I don't know exactly which chipset. The Z-5500 is capable of decoding DTS 5.1 and Dolby Digital 5.1 input streams over the optical cable. This works fine for movies which are already encoded, but apparently to get games to work in surround I need either Dolby Digital Live or DTS Connect to encode the audio from the game in real time.However, I haven't seen any way to enable this in the Realtek HD Audio Manager (Boot Camp driver) or the Windows sound control panel.Is the 2009 Mac Pro's motherboard compatible with Dolby Digital Live or DTS connect in Vista x64 on Boot Camp? If so, how do I enable it?If it's not, can I bypass the problem anyway using third party drivers or plugins?
View 10 Replies
View Related
Aug 14, 2009
Everything seems to be working well except there is no sound from speakers on the Vista side. Still OK on Mac (of course).
I have iMac 3.06gHz
Checked that sound is not muted etc.
It does seem to have two volume controls (Vista) in the dock? One Realtek and one Mixer. Neither are muted. Device Manager says all is ok and running latest software.
One other small matter is that I can't seem to load a network adapter. It finds new hardware everytime I open but can't find any software and as I don't know what I'm looking for I am sort of stuck.
View 6 Replies
View Related
May 21, 2010
I recently installed Windows Vista Home Basic through BootCamp on my MacBook Pro. Everything works fine, except for the one thing that there's no sound... At the moment if i start something with sound, you'll see "the green bar jump up and down" But no sound... Tried to search for an audio driver, and installed one, (not sure which one it has to be though) But it didn't help...
Have tried uninstalling the whole lot and reinstalling it again, same thing happened, when i put in the Max OS x for the driver installation i recall it saying removing Realtek Audio or something, so search for that, but didn't help :/
Any ideas to would i could try to do?
View 7 Replies
View Related
Jan 15, 2010
I recently installed windows vista (home edition) via bootcamp on my macbook pro.
Everything is running perfectly apart from the sound. I think it might an issue with the computers sound card. When I plug my headphones into the audio output jack, no sound comes through... it still plays out of the speakers. The sound is audible, but just barely.
What may be causing this? Are there any specific drivers I need to install?
View 3 Replies
View Related
Jul 18, 2010
I'm trying to run vista via bootcamp. all seems fine except I got no sound (red light coming from 3.5mm jack)
I have no yellow !!!
Am I using a wrong driver?
View 1 Replies
View Related
May 30, 2012
Sound may not automatically switch to headphones using Microsoft Windows Vista on some Mac computers
Info:MacBookPro, Mac OS X (10.7.4)
View 2 Replies
View Related
Jun 1, 2010
I have a 2010 15" MacBook Pro 2.4 i5 that I am trying to install Windows 7 on using BootCamp. I have installed a partition using BootCamp of 45GB but once it prompts me to insert the Windows disk, I insert it but after a few seconds the machine ejects the disk without ever mounting or seemingly recognizing the disk.
I am trying to install Windows 7 Ultimate 64bit from a disk.
Can anyone offer any insight or help me figure out what the problem is? I have already tried rebooting and that doesn't work.
View 1 Replies
View Related
Dec 1, 2009
I just installed a copy of window 7 x64 ultimate on my uMBP 15", 2.66, 4GB ram, 9600 GT.
everything went well using the bootcamp that comes with my snow leopard dvd and also using the bootcamp driver on that dvd too.
anyway i have a few question regarding this.
-after i installed the windows, now everytime i perform disk utillity, verify disk permissions, it takes considerable longer time compared to when the machine is Mac OS only.
previously , after i hit the "verify disk permissions button" it will says straight away like estimated time 28 minutes, then drop to 8 minutes and then to 1 and finaally done.
now after i install window 7 on my mac using boot camp. when i hit the "verify disk permissions" it it says estimated time 1hour 40 minutes !!!
of course it will finissh eventually in less than that , but still it considerably took longer compared to prior window 7 installattion, does anyone experience this as well ?
-the performance benchmark on win 7 ultimate x64 on my mbp is 5.6 score.
is this normal ?
View 1 Replies
View Related
Apr 24, 2009
I have a question about installing Windows 7 Ultimate on my MacBook is the same as when I installed Windows Vista, just use the same drivers from the Bootcamp disc or is it different all together? if so could someone explain what is different.
View 4 Replies
View Related
Jul 6, 2010
just wondering if this is possible to install on my mac. specs of mac or in sig.
View 5 Replies
View Related
Nov 19, 2010
Just updated to 3.2 and now my trackpad won't work like it used to. I used to be able to tap with one finger and drag the cursor with the other to select multiple items, now it won't let me do this anymore. Was the update intended for some other Win OS or what?
View 9 Replies
View Related
Jun 24, 2010
I have a Magic Mouse, which worked perfectly on Snow Leopard and Vista Ultimate. Then, I updated to Windows 7 Ultimate and it appears that the system keeps trying to connect to the Magic Mouse. By the way, it still works on Snow Leopard, so the problem is isolated to Windows 7.
View 1 Replies
View Related
Sep 19, 2010
I have a Windows Ultimate DVD. I want to make a back up of it and use this DVD when I need to install Windows on my machine. If I make a disk image of this DVD and then burn the image back to a DVD will it function or do I need another tools? ( like toast )
View 1 Replies
View Related
