Windows On Mac :: "finalizing Installation" The Screen Blacks Out And The Crashes?
Jan 13, 2010
ok, yesterday, i installed windows 7, but at the end of the installation where it said "finallizing installation" the screen blacks out and the macbook crashes...
Then when i boot up in windows 7, there is a black screen with a tiny gray "_" flashing in the top left corner. The wierd thing is when i boot off the bootcamp partition in parallels, everything works fine... I am using a macbook 5,2 (may 2009) model running leopard.
I have been everywhere trying to resolve an issue. When I click on Quicken either from finder or in the windows dock, my screen blacks out and I must shut down manually and restart again. Then I get these nice little reports:
Interval Since Last Panic Report: 169589 sec Panics Since Last Report: 9 Anonymous UUID: 17BD3104-E583-4752-8B41-8E55B624FA7F
After windows is installed a Blue screen appears with cursor on screen but it freezes completely.I can fix this by restarting my mac , then once windows restarts i insert the Mac OS disc , select the disc within my computer but the following message appears "Package requires new version of installer"
I seem to almost complete the upgrade and then it does the final reboot to comlete installation and then I get the blue screen which appears due to a display device issue.. I have 1.1 MP with a 7300gt video card in it
Just installed windows 7 on my imac, the only problem is that at the lowest brightness (set via keyboard and boot camp utility) the screen is too far bright!! Is there a way to low brightness via software?
Just got the new iMac quad core i7, purchased Windows 7 Home Premium and having trouble getting it to install using Boot Camp it goes through all the steps I partitioned 350 gig then formatted went thorough the install steps, it reboots and finishes the install, then reboots but nothing happens its just a black screen
I have a 1st generation macbook pro running snow leopard 10.6. I've been trying to install windows xp, vista, or 7 using bootcamp but for some odd reason i cannot boot into the cd. I put the cd in and made sure the macbook is reading it (which it is because the icon shows up on the desktop) before i hit "start installation". the laptop would restart but it doesnt boot into the cd, it just goes right into the gray screen and stays there while i hear the cd spinning. I've installed windows xp using this method but that was about 4 years ago, for some reason the hard drive died on me so i have to do this whole process over again. I dont recall having this problem either.
I am trying to follow the following guide to do a triple boot, but I am stuck in Windows 7 installation triple boot snow leopard, windows 7, & ubuntu
I have done the following: 1. Did a clean installation of OS X Snow Leopard on hard drive (Not yet partitioned the hard drive)
2. Installed rEFIt I am not sure what the poster means by making sure it works by pressing the option button. I am assuming it means that I will be able to see the options I can choose when I press option? (I do see options to pick either "Hard Drive" or whatever disc in the DVD)
3. Partitioned 30 GB (or was it 40 GB? x.x I forgot sorry) space in Boot Camp Assistant for Windows installation. Chose the option to install Windows later.
4. Inserted OS X Snow Leopard installation disc and boot from there.
5. Opened up the Disk Utility and partitioned a hard drive (called Hard Drive_2) via the Partition section as instructed by the guide. Formatted in MAc OS Extended (Journaled)
So now, in that area I see "Hard Drive", "Hard Drive_2" and "BOOT CAMP" (so I am assuming that is what the poster meant by "3 partitions".
6. Restarted the computer with Windows installation disc.
Problems occur right here: Problem 1: I do not see anything called "C something" as the poster said. But I do see something called "Boot Camp"
Problem 2: All the partitions that are available says that "Windows 7 can't be installed". So my question is am I supposed to "delete" a specific partition to install it?
I have pictures of the screen which I will upload later if this isn't clear enough.
Everytime I start skype while in windows, the computer crashes and I get the blue screen... I think it has to do with the sound drivers, because when I'm using msn messenger also in windows suddenly the microphone mutes itself.
I tryed updating the realtek drivers with no help, updated skype, no help, I uninstalled the realtek drivers and the laptop did not crash anymore but I had no sound, any advice like for example how to get the microsoft drivers to work on the laptop without using realtek??
For whatever reason with the microsoft drivers,I think the sound is trying to come out of the digital outlet, I can see the ligth inside the jack, but nothing comes out of the laptop's speakers...
I am unable to install Windows XP using Boot Camp Assistant. On multiple attempts, the install process crashes in the middle with an error message that reads:
Press any key to boot from CD .. Disk Error Press any key to restart
The installer script for OS X 10.5 crashed during the last part of a clean installation on my G5 (see sig.) and left some folders and aliases to folders visible, that I am sure should be invisible. Updated to 10.5.8 same situation. Running DU to repair permissions does not fix this, nor can I set the folders to invisible using Cmnd+I. The system runs just fine, but the folders and aliases listed below should not be visible. Folders Aliases (the folders these point to are also visible). bin etc cores tmp private var sbin usr Volumes
I have a 95 minute film in the timeline. There are auditions scattered throughout. In FCP 7 you could select a track with an arrow pointing to the right and perform a command that affected all the clips in that track. My question is, as the title indicates, is there a way to finalize ALL the auditions across the entire timeline? Or do I have to scroll through and finalize each audition separately?
Info: Final Cut Pro X, OS X Mavericks (10.9.4), 3.5Ghz intel Quad-core i7, 16 GB RM
Basically this would create a big 4 gig array that I could split into multiple partitions. I'd have mirroring and fast performance. I was wondering what the performance difference would be between the Greens and Blacks - Greens are known for worse performance, but I was wondering if in RAID 10 it would even matter.
I seem to be rather confused after reading so many websites which say its possible to install windows 7 upgrade over xp by custom install in bootcamp.
I purchased a windows 7 upgrade which I have downloaded as a ".img" file.
However, bootcamp doesnt recognize my .img disc.
I have tried converting the .img to a .iso, and then burning the .iso as a iso disc, but still no luck. (Im not sure if its because of Active iso software Im using to burn the discs or if im doing something wrong.)
I have a legit version of XP already running via bootcamp.
At the moment I am testing with my 2010 Macbook Pro with a 330M hooked up to a Denon AVR-3806 receiver via HDMI. The Denon is hooked up to a plasma via HDMI.
I assume that the 320M in the Mini and the 330M are very similar, which is why I am posting here in the Mini forums, since I think I will get more visibility in here where people hook up their Macs to TV sets.
When I plug in the HDMI to the Macbook Pro using a mini displayPort to HDMI adapter, it automatically creates some generic DENON_AVR color profile or something like that. Things look ok, but everything is too dark for my liking. All shadow detail is lost.
It seems like I am getting better results when using the s-RGB color profile or even the Adobe RGB 1998 color profile, but i'm still not happy.
How do I get this video card, the 320M or the 330M, output just 'raw' or default, without having to calibrate the color profile? I tried calibrating using the Color menu on the Macbook Pro, but it just didn't work out. I would like it to just output the default or something so that I can just use the TV to control the final result. I have a few Popcorn Hour boxes that I currently use and I don't have to mess with any sort of color profile on those boxes. It just outputs a great picture. And I can leave the HDMI input on my TV with the same picture settings that I use for my DVR. Since I am using the AV receiver to do the HDMI switching, only one HDMI input on the TV is being used, so I have to leave the picture settings alone. The HDMI input is set on the Pioneer 6070 to accept RGB.
so i have a windows XP professional disk, SP2 and all. i am trying to install windows, i get as far as partitioning the disk, but once it says "please insert XP disk" i do that, and it will think for a few minutes, and make a loud noise [coming from the mac] then a message pops up and says 'please insert installation disk.' the disk is brand new, what am i doing wrong? should i be partitioning the windows side larger?
I've succesfully installed Windows 7 on my Macbook Pro mid-2009 with OS X 10.5.8 via Bootcamp 2.0. However, I have a problem:
When I insert my OS X Leopard install DVD into Windows 7 to install the Bootcamp drivers, the setup.exe only displays two options and both are apperantly related to the Macbook Air:
One of the options is to install OS X from an external source related to the Macbook Air and the other options is sharing of CD/DVD-drive for the Macbook Air.
I can't seem to locate the Bootcamp drivers. I've tried both my OS X Leopard and Snow Leopard installation DVD's but with the same result.
I've been thinking that the drivers could be located in a folder on the OS X installation DVD, but since I can't right-click in Windows the folder is hard to reach.
I occasionally get the BSOD sometimes on the Windows XP side of things in Boot Camp. I always use a mouse on the Windows side, as the trackpad is very glitchy and buggy. Sometimes, when I use the mouse for a prolonged period of time, I accidently touch the trackpad forgetting all of the sudden that i had the mouse (or i use it to scroll down) and the whole thing blue screens on me. It has happened 8 times already, each time blue screening after touching the mouse. I don't know why, but I find out that the mouse drivers are the one that is messing up my Windows XP SP3.
Will the speed be comparable between a RAID setup that uses 2 x 1TB 64MB cache Blacks, vs 1 SSD (Intel X25-M for example)? Will the difference be noticeable at all (during application launches etc). I would like to know soon because I just ordered the 2 Blacks
I'm trying to install W7 on my Mac, everything goes fine until I get to the actual windows set up, and it says "that's everything we need for now" then your pc will restart a few times. Which it does, but then just goes to a black screen, the Mac sounds like it's gone to sleep. I left it for about 30 minutes with no change so powered it down..tried it all again from scratch and still the same result. On the Mac partition I can see that the windows partition has been created, but is called "untitled"
So I just finished installing Windows 7 on my MPB and I need to install Mac drives but I realize my Mac OS X Disc is in my college storage (Illinois) I'm in NY. Is it possible to download files from a torrent (putting it on a DVD etc..) or should I just call apple to get new one?
On my iMac I have been trying to install bootcamp so I can get some of my favorite games.
I have partitioned the hard drive, I put in the windows xp disc to install, but when it restarts to install windows, it cannot get past the grey screen.
I'm not sure what the problem is, and I have followed the bootcamp assistant in doing everything it asks.
After trying to install windows, the only way I can even get it to reboot using mac is to do command-p-r. Anyone have any idea as to what the problem could be?
I currently have a MacBook Pro and I am trying to put Windows OS on it using the Boot Camp option. I can download Windows 7 using my university's website, but all instructions for installing Windows using Boot Camp require using a CD. Is it possible to do it with it downloaded on the desktop, or do I need to put it on a CD/DVD somehow and then use that? I'm not sure if I can put it on a CD (with the stipulations of the University share program).
I was going to install Windows xp on my Mac OS X but uner the installation it interrupted because the guy that owned the cd had to go home. So after that I started my computer and it won't work. It's a black screen with a white flashing icon an it looks like this: I am trying to reinstall my computer but i can't beacuse it seems like I have no Machintosh HD thing [URL]. And this is how it looks like in the Disk Utility [URL]. Under the 250 GB hiatchi harddrive so should it be a thing called Machintosh HD but it's not there.
As of this minute I'm in the process of installing Windows XP via Boot Camp on a Mac Pro. The problem I ran into is that the install CD I have is for an upgrade to Win XP. Since the installer can't find a previous version of Window, it's asking for a install CD for the previous version. I do have a Win 2K Pro install CD, but I can't eject the Win XP CD from the Mac Pro drive to put it in.
I used BootCamp to partition my iMac's HD and install Vista. After doing so, I remembered I have a USB 2.0 80 gig hard drive with nothing on it. Would it be possible to put Vista on that? I'd prefer to just move the partition if possible, if not, I'd reinstall Vista. I know the Intel Macs can boot from USB, I just don't know if they'll boot Windows from USB.
