Windows On Mac :: "please Insert Windows Installation Disk" Message While Trying To Install Windows XP
Feb 7, 2009
so i have a windows XP professional disk, SP2 and all. i am trying to install windows, i get as far as partitioning the disk, but once it says "please insert XP disk" i do that, and it will think for a few minutes, and make a loud noise [coming from the mac] then a message pops up and says 'please insert installation disk.' the disk is brand new, what am i doing wrong? should i be partitioning the windows side larger?
View 2 Replies
ADVERTISEMENT
Jul 31, 2009
I tryed to install windows xp on my mac and my disk was too scratched so the install failed. So i held down the power button on my mac until it turned off. Big mistake. Now whenever it boot up, it says press any button to boot from cd. I tryed installing rEFit, it installs but doesn'ty boot into the boot loader.
View 3 Replies
View Related
Sep 4, 2010
I want to clean install windows 7 after formatting disk. This doesn't sound like a great idea, but I need this for couple of engineering softwares to work. I don't want to spend my nights in computer cluster or at friends pc...
I have heard, I will encounter following issues:
- battery will drain faster
- graphics driver for x64-bit version
- camera
- iPhone backups and syncs (music, video, cal, contacts and apps)
- I would need a external mouse for right click.
I can live with all of the above problems except graphics card drivers. Can anyone provide feedback or useful links they have refered to installing Windows 7?
View 7 Replies
View Related
Oct 22, 2009
Is it possible to install Windows 7 on an internal disk via Boot Camp and then remove this disk and use it as an external drive? I have two drives for my mini, one in use and one in an external case; unfortunately, neither have room for everything plus Windows. If the answer to this question is no, then I'll buy a bigger drive. I'd just like to avoid this if possible (I already have a ton of external drives and not enough ports to plug them into).
View 4 Replies
View Related
Jun 1, 2010
I have a 2010 15" MacBook Pro 2.4 i5 that I am trying to install Windows 7 on using BootCamp. I have installed a partition using BootCamp of 45GB but once it prompts me to insert the Windows disk, I insert it but after a few seconds the machine ejects the disk without ever mounting or seemingly recognizing the disk.
I am trying to install Windows 7 Ultimate 64bit from a disk.
Can anyone offer any insight or help me figure out what the problem is? I have already tried rebooting and that doesn't work.
View 1 Replies
View Related
Sep 3, 2010
I am looking to install Adobe CS5 from a disk for a windows pc onto my macbook pro. Can this be done?
View 2 Replies
View Related
Aug 19, 2010
I have seen other posts and I'm concerned that I didn't have all the info that I need. I would like to install Windows Server 2003 R2 64-bit on my IMac at home using VirtualBox. VirtualBox is like Parallels or VMware and is free. Where is the best place to get a Windows Server install disk and is there anything that I should look out for when installing it on my IMac?
View 4 Replies
View Related
Sep 19, 2010
I am trying to follow the following guide to do a triple boot, but I am stuck in Windows 7 installation
triple boot snow leopard, windows 7, & ubuntu
I have done the following:
1. Did a clean installation of OS X Snow Leopard on hard drive (Not yet partitioned the hard drive)
2. Installed rEFIt
I am not sure what the poster means by making sure it works by pressing the option button. I am assuming it means that I will be able to see the options I can choose when I press option? (I do see options to pick either "Hard Drive" or whatever disc in the DVD)
3. Partitioned 30 GB (or was it 40 GB? x.x I forgot sorry) space in Boot Camp Assistant for Windows installation. Chose the option to install Windows later.
4. Inserted OS X Snow Leopard installation disc and boot from there.
5. Opened up the Disk Utility and partitioned a hard drive (called Hard Drive_2) via the Partition section as instructed by the guide. Formatted in MAc OS Extended (Journaled)
So now, in that area I see "Hard Drive", "Hard Drive_2" and "BOOT CAMP" (so I am assuming that is what the poster meant by "3 partitions".
6. Restarted the computer with Windows installation disc.
Problems occur right here:
Problem 1: I do not see anything called "C something" as the poster said. But I do see something called "Boot Camp"
Problem 2: All the partitions that are available says that "Windows 7 can't be installed". So my question is am I supposed to "delete" a specific partition to install it?
I have pictures of the screen which I will upload later if this isn't clear enough.
View 4 Replies
View Related
Nov 27, 2010
I always get this error when I try to boot up to my Windows on Bootcamp: No bootable device -- insert boot disk and press any key
I installed Windows 7 through Bootcamp and I got everything installed perfectly!
I partitioned my Mac's hard drive into 3 before the Windows installation:
-Mac OS
-Data For Windows
-System for Windows itself
It all worked fine and i could drag and drop anything into that Data Hard drive through Windows very easily. However, when I came back to my Mac OS and partitioned my Mac Hard Drive into 2 parts(Which makes 4 partition now) and tried booting back up to my Windows, it gave me that error. I then decided to re-partition it like before which was Mac, Data and Windows. Booted it back to Windows and it gives me the same error again. I have an attached Picture showing how my partitions look now. Does anyone know how to fix it? I think it's because what my Windows is booting from is the Data Hard Drive but not my Windows 7 Hard Drive with the OS on it. Is there a way to change it's place or to tell it which Hard Drive to boot from?
View 6 Replies
View Related
Jul 1, 2010
I seem to be rather confused after reading so many websites which say its possible to install windows 7 upgrade over xp by custom install in bootcamp.
I purchased a windows 7 upgrade which I have downloaded as a ".img" file.
However, bootcamp doesnt recognize my .img disc.
I have tried converting the .img to a .iso, and then burning the .iso as a iso disc, but still no luck. (Im not sure if its because of Active iso software Im using to burn the discs or if im doing something wrong.)
I have a legit version of XP already running via bootcamp.
View 13 Replies
View Related
Sep 20, 2009
I have a Macbook Air and I want to install Windows 7 in boot camp. however since I have a 128 SSD I definitely want to minimize the disk space it uses. I installed it on an imac and it took 14 Gigs!
Is there any way to do what we can do in OS X, remove print drivers etc? I couldn't see any option during the installation on the imac.
Dont like to allocate 24 gig for Windows since I need some space for any applications as well.
View 1 Replies
View Related
Nov 15, 2009
My problem is that when I try to boot to the XP installation disk, I get the very fast, flashing, gray apple, followed by a question mark folder, followed by the ghostbuster symbol, without the ghost.
The disc keeps spinning, but the windows installation screen never appears.
I'm new to installing windows with boot camp.
Anybody know what I'm doing wrong?
View 1 Replies
View Related
Nov 3, 2009
I've succesfully installed Windows 7 on my Macbook Pro mid-2009 with OS X 10.5.8 via Bootcamp 2.0. However, I have a problem:
When I insert my OS X Leopard install DVD into Windows 7 to install the Bootcamp drivers, the setup.exe only displays two options and both are apperantly related to the Macbook Air:
One of the options is to install OS X from an external source related to the Macbook Air and the other options is sharing of CD/DVD-drive for the Macbook Air.
I can't seem to locate the Bootcamp drivers. I've tried both my OS X Leopard and Snow Leopard installation DVD's but with the same result.
I've been thinking that the drivers could be located in a folder on the OS X installation DVD, but since I can't right-click in Windows the folder is hard to reach.
Have any of you guys experienced this?
View 3 Replies
View Related
Aug 21, 2010
I have a Macbook (from 2007) running Tiger OS X 10.4.11. I am trying to install BootCamp onto the computer, but Tiger did not come with Boot Camp installed. Because of this I had to download Boot Camp 1.3 Beta. This is old, and has expired, but I changed the system date to be 2006 and this has made it work. When I am partitioning the disk, this message comes up: Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again. I have already Backed Up and the computer is already formatted as Mac OS Extended (Journaled), but this message still comes up. Disk Utility has Greyed out the Erase section for Macintosh HD so I cant re-format it.
View 3 Replies
View Related
Nov 14, 2010
I'm trying to install W7 on my Mac, everything goes fine until I get to the actual windows set up, and it says "that's everything we need for now" then your pc will restart a few times. Which it does, but then just goes to a black screen, the Mac sounds like it's gone to sleep. I left it for about 30 minutes with no change so powered it down..tried it all again from scratch and still the same result. On the Mac partition I can see that the windows partition has been created, but is called "untitled"
View 3 Replies
View Related
Jun 9, 2010
So I just finished installing Windows 7 on my MPB and I need to install Mac drives but I realize my Mac OS X Disc is in my college storage (Illinois) I'm in NY. Is it possible to download files from a torrent (putting it on a DVD etc..) or should I just call apple to get new one?
View 6 Replies
View Related
Aug 29, 2009
I set up a 32g partition for windows xp pro. Loaded the disk and formated the partition to FAT. Hold option at startup and load windows. Upon loading windows i get the following message "There is no disk in the drive. Please insert a disk into drive." I have tried leaving the xp disk in, I have tried taking it out before loading windows and putting it in afterwords, nothing works. I can not eject disk while in windows.
View 1 Replies
View Related
Jan 3, 2011
I have a macpro with OSX on one drive and windows 7 on a partition of another drive. Both systems work fine and I boot into windows by holding the option key down. What is odd is if I go to the system preferences startup disk my windows install does not show up. I did move my windows partition a while ago to a new drive. I used bootcamp to create the partition and winclone to move the data. It's not a big deal not having the option in the preference pain but would be nice. If I am in windows and go to the bootcamp control panel both OS X and Windows are there.
View 3 Replies
View Related
Mar 30, 2009
Ok, Here is the scoop. I am trying to get Wifi to work on my macbook while on XP. When I put in the disk and it says "The package requires a newer version of Windows Installer. Would you like to update?" I say yes and it says "The requires resoruce update is missing." and if I click no it says "The operation is aborted." or something.
View 10 Replies
View Related
Dec 15, 2009
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
View 8 Replies
View Related
May 22, 2010
I have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
View 4 Replies
View Related
Nov 23, 2010
I have just installed Windows 7 via bootcamp and everything went smoothly, the only problem is that i have lost my DVD of snow leopard and want to install the 3.2 drivers on windows 7, however it is to my understanding that i need to install 3.0 from the DVD first. Is there any way around this without ordering another copy of snow leopard? ?25 might not seem a lot but on a student budget i would rather not shell out.
View 1 Replies
View Related
May 13, 2009
I have parallels 4 installed and I want to install windows XP. My school gives us legal copies of windows 98 and a windows xp upgrade. However, neither of these comes in the form of a CD image. They are both .exe files. Parellels asks for a CD or CD image. Is there a way to install windows 98 from an .exe in parallels?
And if so will I be able to use the windows xp upgrade once i have windows 98 installed? I haven't yet tried creating a CD image with the exe file on it. I don't know if this would work because it's all in one file and not a typical windows install disk.
View 3 Replies
View Related
Aug 31, 2010
I am trying to install Windows 7 on my 24" iMac. But the DVD drive it playing up and is not accepting the CD. I am wondering if there was a way I could use my Macbook to install it over Firewire or something similar ? Even USB ?
View 3 Replies
View Related
Aug 27, 2009
So has anyone tried the new Bootcamp 3.0 drives off the Leopard disk with Windows yet? Do they support Windows 7 now? Any improvements to battery life, heat, etc?
View 9 Replies
View Related
Mar 16, 2010
I have a Stardom Decktank filled with two WD 1.5tb drives formatted as concatenated (JBOD). Raid version is AppleRaid 2.0.
I chose to format the disks as ntfs the first time but when I had to defragment the disks waaaaaay to often to get full speed with torrents and usenet I figured HFS+ would work better.
The only problem is now that I can't get the JBOD disk to work in Windows 7 via Boot Camp. Is there any drivers i need to install to get it to work? I have googled but found nothing.
View 4 Replies
View Related
Apr 10, 2009
I searched for a while trying to find the answer but did not find it. I just installed Vista Business via Bootcamp. I am not able to access the internet or anything. If I read the help stuff right I need to use the OSX install disk to install the drivers. The problem is, I don't have the install disk. Is there any other way to get the drivers? Or am I just missing something easier?
View 5 Replies
View Related
Aug 28, 2010
I got a copy of Win7 from school and started installing it on my wife's computer (I have my own Win7 copy). I need to uninstall it...don't ask. I just need to know how to get a partially installed copy of Windows uninstalled. Each time I put the disc in and launch Parallels it wants to continue the install, which I can't do (faulty product key). Anyone know how to uninstall at this point??
View 8 Replies
View Related
Oct 3, 2010
my parents iMac 20" Core Duo is having issues. After bootcamp restarts the system I get an error on start up, a folder with a question mark shows up aswell as that prohibition logo How can I install Windows 7 on that machine?
View 7 Replies
View Related
Feb 22, 2009
you cant use a windows xp sp1 disk to install windows xp onto your mac using bootcamp.What i wanted to know is if i partition my HD then format it to a recognizable format for windows installation disks, would i be able to install windows xp sp1 that way?or would the same principle apply as bootcamp and sp1 versions of xp are incapable of being installed on macs?
View 6 Replies
View Related
