I get great wireless connectivity under Mac OS X, since the wireless base is in the room right next to the MacBook Pro, but under Windows XP Home Edition with the Mac drivers installed, I never get above two bars, and connection drops every 20 minutes or so. Windows is completely updated, all boot camp drivers are updated, everything.
View 3 Replies
Is there any point in mixing wired and wireless connectivity with a Mac Pro? Would this bump up/down speeds at all?
View 7 Replies View RelatedMy wife has an iBook G3 500mhz with 320mb of ram. She is having trouble with the airport card that is installed in it. I have a 2.4ghz wireless access point in the upstairs of my house (next to my main machine) which is sending the signal to a 2.4ghz bridge in the downstairs. House is wood frame. She is having problems connecting to the wireless network. When she can actually connect, she has to be right next to a wireless router and even then it doesn't work sometimes to connect. Is the airport card going bad in this? Is it possible that the antenna has gone bad or has a kink in it or something?
View 2 Replies View RelatedI have a PC laptop which also uses the wireless and has never had a problem.My Mac Pro loses access to the net every few minutes or so. I usually follow a sequence of "Turn AirPort Off" / "Turn Airport On" to cycle the connection, and this works but only for a temporary solution until it drops out a few minutes later.also link to pic here..[URL] It always shows full bars even though in the activity monitor it just flatlines or flutters near 0kB/sec. Like many others, my connection drops although the wireless signal icon remains full. I've noticed that as long as my system doesn't idle (ie - if I'm downloading something, or on a webpage which is always sending or recieving data) the wireless connection seems alright. But if I am on a webpage (for instance, this Apple website which is idle and not sending or recieving data) for a few minutes or am away from the computer for 5 minutes, the connectivity dies and I cant access the net. I then follow a sequence of "Turn AirPort Off" / "Turn Airport On" to cycle the connection, and this works but only for a temporary solution until it drops out a few minutes later. Also, can I ask that NO ONE suggest that I hook my computer up via the ethernet cable as there is no access points upstairs and I'm not going to pay a tonne of money to get one installed when I paid a tonne of money for my "AirPort Extreme" so I didnt have to (which was just over 2 years ago).
Its been a constant problem for the last 12 months and the short-fix of "Turn AirPort Off" / "Turn Airport On" to cycle the connection has driven me to madness (especially when I write a lot of information into a site for example this, and after 15 minutes I click the next button or send and dont realise the net is no longer connected and I LOOSE EVERYTHING I'VE JUST TYPED. It's happened 1000's of times.
[code]....
Info:
Mac Pro, Mac OS X (10.7.3), AirPort Extreme
So every so often after I open my laptop up my wireless will work initially but then all the sudden will stop working. All I have to do is turn off airport and turn it back on and it works again.
View 4 Replies View RelatedMy job requires me to be mobile, and I move from one office to the next frequently, to attend to various meetings etc. Every time I move from one office to the next, I have to turn WiFi OFF, and then back ON again, in order for it to re-establish connectivity. This is a major frustration, as quite often I am downloading or uploading work applications, and have to re-start the download / upload again from scratch. It's impractical to not move until these are complete.
Mac OS X Lion Version 10.7.3
Info:
MacBook Pro, Mac OS X (10.7.3)
I must admit that this posting is a last resort. However, remarkably, on narrowing the problem it seems it has to do with an unknown default setting on my Mac OS X Leopard on both my MacBook and iMac.
This week I invested in two new Wireless-N routers - Belkin and D-Link - and both fail to perform. The problem manifests itself as follows:
- When my Apple is wirelessly connected to the router, it takes a very long time to pull up any website. And unless I am imagining things, it seems to first pause when the blue progress indicator reaches just beyond "[URL]" each time. It is slow loading beyond this initial pause as well.
- When I change my security from WPA2 to WEP to None, it makes no difference whatsoever.
- When my Apple is connected to the router via ethernet, it performs very well. Each website appears very quickly and as expected i.e. no wireless connection.
- Very surprisingly, when I am using Windows via Boot Camp on my iMac, it performs very well when *wirelessly* connected. This threw me a little. This is what led me to suspect there's a default configuration with my Mac OS X that is causing the problem.
- In light of the above point, I have not yet checked to see whether wireless frequency or channel affect the download speed.
- For 2.5 years I had been using a Netgear Wireless-G router without any problem.
Might anyone know what the problem is? Or at the very least how better to diagnose it?
Upon receiving the monitor, I immediately plugged it in to my Macbook, using the Mini-DV to VGA adaptor I already had, for use with projectors. The monitor was good, but a bit blurry and not too sharp, due to the analog signal. So I ordered a Mini-DVI to DVI adaptor. When it arrived, the improved picture quality was immediately apparent.
However, as time went on, I noticed my wireless connectivity was getting terrible. Extremely slow Safari page load times, and upon going to Terminal and pinging my router, I would often get response times of 21000 milliseconds, or worse! I did a lot of research, on router firmware, on wireless connectivity, etc., but to no prevail. Then, on a whim, while continually pinging my router, I removed the DVI adaptor from my monitor. The ping instantly dropped from tens of full seconds to just a stable 0.4 milliseconds! Using my VGA connection resulted in no worse wireless connectivity than without it, but upon plugging in DVI and stressing the connection a bit (i.e. downloading a large file), the connection went bonkers. The pings also immediately jump from 0.4 milliseconds to a range of 1-4 milliseconds, regardless of any "stressing".
I am new to the IMac experience which I have to say so far I love it but I am having 2 problems.
1) Every time my computer goes to sleep I lose wireless connectivity and I have to log back in where as my other computers I dont have to do this it signs back in automatically
2) Some how I lost Spaces from the icon bar at the bottom of the screen and can not figure how to get it back down there.
I've been using a wireless adapter to connect a PC and a laser printer to my Apple based network. The laser printer is always available but the PC only shows up occasionally. I am not making any changes to cause it to show up when it decides to.
View 1 Replies View RelatedI just installed the Airport extreme wireless card on my emac, but I have run into some problems:
1)after installing the card, the mac took a very long time to start up, I tested to make sure it was the card: everytime I started it up without the card, it did the normal thing, but with the card, it took a long time
2)after finally starting up, nowhere can i find where/how to configure the wireless. When I go to configure the network, it has all options, but the airport card option is not usable.
On a 1st generation Time Capsule will an iPod Touch automatically connect to my wireless network via TC or do I have to manually toggle the 2.4GHz/5.0GHz options in preferences?
View 2 Replies View RelatedImac and iphone lost internet connectivity via Linksys wireless router. Ehternet works fine. Keep getting note about "self-assigned" ip. Ideas? I have tried everything I have found and read.
Info:
iMac, Mac OS X (10.6.8)
I've successfully installed XP on my Macbook (Late 2009) and now need to install the drivers to get Network connectivity etc. However I don't have my mac disc at hand as I am away travelling at the moment. Can I download the drivers either from my mac or from the internet to USB, then transfer and install them into XP? I have the latest version of OSX and am up-to-date with everything afaik. Running XP Pro SP 3.
View 15 Replies View RelatedI have windows xp sp3 and while playing my game, the internet keeps disconnecting about every 5 minutes. Then a bubble comes up and says, "Limited or no connectivity" and I have no internet. So I have to disconnect and connect again to get another 5 minutes before it does it again. The modem I have is this: Verizon GT704WG Wireless DSL Modem/Router To narrow the problem down I went to another house with another wireless and it worked without any problem there.
View 1 Replies View RelatedTeaching in Netherlands. When connected to wireless, signal bars are full but Macbook does not display any page just a blank page. Itunes and App store both work fine.
My windows notebook and Android phone both connect to wireless.No proxy options are ticked.Ran the Assistant Diagnostics: Selected Wireless, Network settings, ISP, Internet, Server went green/red then back to green with messafe saying Network Change detectedRestarted routerRemoved wifi network and reconnectedRan wireless diagnostics, nothing shows up Renewed DHCP LeaseChecked the Ipv4 and Router address - both begin 192.168.178.xThere are two DNS Server numbers - checked both and they are related to the ISP
Dont have ethernet cable to check wired connection
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
Is there any way to get the wireless mighty mouse to work in windows 7 running via bootcamp tried to pair it but no luck.
View 7 Replies View RelatedHaving problems with the Audio, Brightness and eject button keys after windows xp automatic update. Buttons sometimes work after a shutdown and restart, sometimes not. Tried the Bootcamp 2.1 reinstall but didnt help much. Where the heck can i get drivers for the bloody thing?
Apologies for the lingo but im quite frustrated. it takes apple yrs to fix one problem but only for another to appear.
I already gave up on Realtek doing something about their crappy sound quality (despite releasing a new driver every two weeks) and the mighty mouse freezing after hibernation unless u press the left button like a man possesed!!
I just installed Windows XP on my MacBook Pro yesterday. It's a 15 inch with a 2.80 Ghz Core 2 Duo processor so I can't see any reason why it should be slow. The weirdest part about it being slow is that my other computer, a 4 year old MacBook, with a 2.16 Ghz, runs it unbelievably easy. If I try to move around a window on the old MacBook it moves smoothly, very easily. If I try to move a window on my MBP it has unbelievable lag and refreshes every millimeter that I move and moves really really slowly. Any reason why it's THAT slow on the MBP and fast on the MB?And then the other problem, the Wifi. Windows appears to not be recognizing my wireless card and I've read some other stuff where you need to find the drivers for your card and then go install those on the Windows side, and I thought I did that. My card is a Broadcom BCM43xx 1.0
View 2 Replies View Relatedi was wondering if it is possible to connect wireless mighty mouse to Windows XP! If so, how?
View 15 Replies View RelatedI installed windows 7 in boot camp, and the drivers that were necessary for my wireless mighty mouse to work. But i have noticed that after not using the mouse for about 5 seconds, it sort of falls asleep. I have to click the mouse and wait a second for it to be active again. I have looked in settings and not found a solution.
View 6 Replies View RelatedAs far as I understand there is a bug that stops Windows 7 or Vista from showing up in the Start Up disk options in the preference settings.
So the only option is to go through the boot menu selection but unfortunately I am using the Apple wireless keyboard and holding the option key down doesn't bring up the boot selection screen. Is there anything I can do ... or am I forced to use a USB keyboard for now ?
For the record I have the Wireless Keyboard and Mighty mouse paired and working in Windows 7 ( The keyboard has occasional lag from the first keystroke input but is fine from then ) Its just that I get no response from keystrokes during boot up.
I've recently installed windows xp on my macbook pro (leopard). When I ran windows xp, i got connected to the wireless network (the one i use to connect while running mac os as well); however, it seems to me that now whenever i run my windows xp, it can't find the wireless network. it just shows other wireless networks which are considerably slower than my preference.
View 1 Replies View Relatedthis phone only comes with p.c.software. I am going round in circles trying to get it connected to my mac. Sony say apple wont let sony give the software away with the phone! Can this be true?! Can someone point me in the right direction
View 9 Replies View RelatedThis was AT&T's recommendation after I complained about spotty wifi access to my g4 powerbook. I'm using a 2wire 2701HGB and am getting the worst connection via airport.
The wireless connection works fine on my HP dv2 -1010ea and the g4 works fine in other locations, (coffee shop, other houses with wifi, hotels, etc.) but not at home. I've tried all manner of WEP, WPA 2, and $password shenanigans, but it the airport signal is woefully unreliable.
My iMac, OS X ver 10.7.3 continually loses conectivity if I go awaya for 10-15 min. Each time I have to reconnect.
Info:
iMac
I am starting a new thread. I was having connectivity to the internet issues earlier. I have an IPAD an IMAC and a PC. I had to unplug my router to move it. Now it seems that I can only get internet access on one device. Earlier in the day my PC internet worked and the IPAD and IMAC did not. After shutting down my PC the IMAC began to work. Is there a setting somewhere for multiple devices?
Info:
iMac
My recent MacBook Pro is losing router connectivity based on its location every few seconds. I need to be in close proximity and direct view of the router for it to stay on. The problem is not with the router, because other machines are fine.
Info:
MacBook Pro, Mac OS X (10.7.4)
I have a MacBook Pro 4,1 (early 2008, pre-unibody model) which has an ExpressCard slot.recommend a USB 3 to ExpressCard adapter for it, ideally one that I can source in the UK? I have looked at several via internet searches though one of the key issues seems to be having a driver that works with 10.6.8. The aim is to connect a Sony XQD card reader to the MacBook Pro via USB 3/ExpressCard to take advantage of the USB 3 speed. Sony's own XQD ExpressCard adapter does not work with OS 10.6.8 (I've emailed Sony requesting 10.6.8 driver support.)
Info:
MacBook Pro, Mac OS X (10.6.8), MBP4,1 2.5 GHz Core 2 Duo 4GB
My macbook pro is connected to the internet via WiFi router, and it very often it happens that my macbook loses connectivity with it. WiFi logo shows the same signal strength, but all browsers (Safari & Chrome) can't load webpages.
This issue can be solved by turning WiFi on and off, but it happens again and again. It looks like connectivity loses when Macbook goes in sleep mode and get's back from it, but sometimes connectivity issues happen even without sleep mode switching. I found in the internet that this issue can be solved by turning off Bluetooth.
