Mac Pro :: Mixing Wireless And Wired Connectivity?
Jan 11, 2011Is there any point in mixing wired and wireless connectivity with a Mac Pro? Would this bump up/down speeds at all?
View 7 RepliesIs there any point in mixing wired and wireless connectivity with a Mac Pro? Would this bump up/down speeds at all?
View 7 RepliesI have a MacBook running wirelessly from a 3 year old Airport wired to a DSL modem. I want to add a desktop PC hardwired to the internet. Do I run an ethernet from the Airport (the input with the little circle of dots icon?) WHat do I need to configure so I can run the PC hardwired and the MacBook wirelessly. Sharing the printer would be nice too.
View 1 Replies View RelatedMy wife has an iBook G3 500mhz with 320mb of ram. She is having trouble with the airport card that is installed in it. I have a 2.4ghz wireless access point in the upstairs of my house (next to my main machine) which is sending the signal to a 2.4ghz bridge in the downstairs. House is wood frame. She is having problems connecting to the wireless network. When she can actually connect, she has to be right next to a wireless router and even then it doesn't work sometimes to connect. Is the airport card going bad in this? Is it possible that the antenna has gone bad or has a kink in it or something?
View 2 Replies View RelatedI get great wireless connectivity under Mac OS X, since the wireless base is in the room right next to the MacBook Pro, but under Windows XP Home Edition with the Mac drivers installed, I never get above two bars, and connection drops every 20 minutes or so. Windows is completely updated, all boot camp drivers are updated, everything.
View 3 Replies View RelatedI have a PC laptop which also uses the wireless and has never had a problem.My Mac Pro loses access to the net every few minutes or so. I usually follow a sequence of "Turn AirPort Off" / "Turn Airport On" to cycle the connection, and this works but only for a temporary solution until it drops out a few minutes later.also link to pic here..[URL] It always shows full bars even though in the activity monitor it just flatlines or flutters near 0kB/sec. Like many others, my connection drops although the wireless signal icon remains full. I've noticed that as long as my system doesn't idle (ie - if I'm downloading something, or on a webpage which is always sending or recieving data) the wireless connection seems alright. But if I am on a webpage (for instance, this Apple website which is idle and not sending or recieving data) for a few minutes or am away from the computer for 5 minutes, the connectivity dies and I cant access the net. I then follow a sequence of "Turn AirPort Off" / "Turn Airport On" to cycle the connection, and this works but only for a temporary solution until it drops out a few minutes later. Also, can I ask that NO ONE suggest that I hook my computer up via the ethernet cable as there is no access points upstairs and I'm not going to pay a tonne of money to get one installed when I paid a tonne of money for my "AirPort Extreme" so I didnt have to (which was just over 2 years ago).
Its been a constant problem for the last 12 months and the short-fix of "Turn AirPort Off" / "Turn Airport On" to cycle the connection has driven me to madness (especially when I write a lot of information into a site for example this, and after 15 minutes I click the next button or send and dont realise the net is no longer connected and I LOOSE EVERYTHING I'VE JUST TYPED. It's happened 1000's of times.
[code]....
Info:
Mac Pro, Mac OS X (10.7.3), AirPort Extreme
So every so often after I open my laptop up my wireless will work initially but then all the sudden will stop working. All I have to do is turn off airport and turn it back on and it works again.
View 4 Replies View RelatedMy job requires me to be mobile, and I move from one office to the next frequently, to attend to various meetings etc. Every time I move from one office to the next, I have to turn WiFi OFF, and then back ON again, in order for it to re-establish connectivity. This is a major frustration, as quite often I am downloading or uploading work applications, and have to re-start the download / upload again from scratch. It's impractical to not move until these are complete.
Mac OS X Lion Version 10.7.3
Info:
MacBook Pro, Mac OS X (10.7.3)
I must admit that this posting is a last resort. However, remarkably, on narrowing the problem it seems it has to do with an unknown default setting on my Mac OS X Leopard on both my MacBook and iMac.
This week I invested in two new Wireless-N routers - Belkin and D-Link - and both fail to perform. The problem manifests itself as follows:
- When my Apple is wirelessly connected to the router, it takes a very long time to pull up any website. And unless I am imagining things, it seems to first pause when the blue progress indicator reaches just beyond "[URL]" each time. It is slow loading beyond this initial pause as well.
- When I change my security from WPA2 to WEP to None, it makes no difference whatsoever.
- When my Apple is connected to the router via ethernet, it performs very well. Each website appears very quickly and as expected i.e. no wireless connection.
- Very surprisingly, when I am using Windows via Boot Camp on my iMac, it performs very well when *wirelessly* connected. This threw me a little. This is what led me to suspect there's a default configuration with my Mac OS X that is causing the problem.
- In light of the above point, I have not yet checked to see whether wireless frequency or channel affect the download speed.
- For 2.5 years I had been using a Netgear Wireless-G router without any problem.
Might anyone know what the problem is? Or at the very least how better to diagnose it?
Upon receiving the monitor, I immediately plugged it in to my Macbook, using the Mini-DV to VGA adaptor I already had, for use with projectors. The monitor was good, but a bit blurry and not too sharp, due to the analog signal. So I ordered a Mini-DVI to DVI adaptor. When it arrived, the improved picture quality was immediately apparent.
However, as time went on, I noticed my wireless connectivity was getting terrible. Extremely slow Safari page load times, and upon going to Terminal and pinging my router, I would often get response times of 21000 milliseconds, or worse! I did a lot of research, on router firmware, on wireless connectivity, etc., but to no prevail. Then, on a whim, while continually pinging my router, I removed the DVI adaptor from my monitor. The ping instantly dropped from tens of full seconds to just a stable 0.4 milliseconds! Using my VGA connection resulted in no worse wireless connectivity than without it, but upon plugging in DVI and stressing the connection a bit (i.e. downloading a large file), the connection went bonkers. The pings also immediately jump from 0.4 milliseconds to a range of 1-4 milliseconds, regardless of any "stressing".
I am new to the IMac experience which I have to say so far I love it but I am having 2 problems.
1) Every time my computer goes to sleep I lose wireless connectivity and I have to log back in where as my other computers I dont have to do this it signs back in automatically
2) Some how I lost Spaces from the icon bar at the bottom of the screen and can not figure how to get it back down there.
I've been using a wireless adapter to connect a PC and a laser printer to my Apple based network. The laser printer is always available but the PC only shows up occasionally. I am not making any changes to cause it to show up when it decides to.
View 1 Replies View RelatedMacpro, Apple extreme, Comcast cable modem.
it's right next to my mac pro (soon to be repaired mac pro)
is it better to just wire it to the modem? or is wireless the same speed?
what am i missing out for using wired? why wouldn't i just wire it?
I just installed the Airport extreme wireless card on my emac, but I have run into some problems:
1)after installing the card, the mac took a very long time to start up, I tested to make sure it was the card: everytime I started it up without the card, it did the normal thing, but with the card, it took a long time
2)after finally starting up, nowhere can i find where/how to configure the wireless. When I go to configure the network, it has all options, but the airport card option is not usable.
On a 1st generation Time Capsule will an iPod Touch automatically connect to my wireless network via TC or do I have to manually toggle the 2.4GHz/5.0GHz options in preferences?
View 2 Replies View RelatedImac and iphone lost internet connectivity via Linksys wireless router. Ehternet works fine. Keep getting note about "self-assigned" ip. Ideas? I have tried everything I have found and read.
Info:
iMac, Mac OS X (10.6.8)
Just wondering what type of network connection you use (if you have a choice). Do you run wireless or wired?
View 3 Replies View RelatedAlong with a first mac mouse, I am also looking to buy a keyboard for my MBP for use at home when connected to the 24" screen.
The big question is however, the small wireless or the fullsized wired apple keyboard?
Are therer any issues with the bluetooth connection? Like, does the MPB need to have booted completely before it is "active" or will it be active from the boot chime? (this could be usefull when needing to boot into bootcamp )
I have a wireless network (n) created by an Airport Extreme.
I also have an Airport Express and another Airport Extreme.
My computers work fine with the wireless. But the PS3 is very slow, and is 'G' only.
I was hoping to figure out a way to use one of my extra devices (the express or extreme) to connect to the 'n' network - and output a wired connection to the PS3 (and old xbox actually).
I was wondering if I can make a wired USB to wireless, Bluetooth whatever. I want to use my old G3 mice and keyboard with my new mac mini but I want the keyboard and mice to be wireless!
View 16 Replies View RelatedNeed to covert my Kodak all in one to wireless. Getting tired of having to connect my pro to it. Are there in a ways to do this?
View 2 Replies View RelatedI have a MediaSmart Server due on Friday. I have an iMac, MBP, MB, and two PC's using an Apple Airport, how should I connect the MediaSmart Server EX485 to my airport, wired or wireless? Is there a performance difference between the two setups?
If wired offers best speed then I can easily do that as they will be near each other.
i've been using the aluminum wired keyboard for the last 2 years or so. i just upgraded to the new BT version.
for whatever reason i cannot get used to typing on this thing! it feels like the keys are smaller or something. hard to explain.
For some reason, when I plug in a wired mouse to my iMac, and then plug in a wireless mouse, the acceleration of both are totally different. The acceleration curve for the wired mouse seems to be about the same as it would be on a Windows computer, while a wireless mouse has the typical annoying Mac acceleration curve that many are aware of, which is an increased acceleration—when moving the mouse slowly, the acceleration is low, and when moving it quickly, the acceleration is high. I noticed this years ago but only recently switched back from a wired to a wireless mouse after it finally died, and I decided to take the jump back to wireless mice since they are far more common than wired ones these days.
Info:
iMac, Mac OS X (10.7.4), 3.2 GHz Intel Core i3, 16 GB RAM
Can i have it wired to my computer and wireless at the same time?
If so, what ports to i plug what into?
Is it - modem-wan port on extreme and a cable going wired from the ether port on the extreme to the iMac?
Do i need to do any configuring?
I know that it's possible to share a wired internet connection from one mac to another computer through wireless, but I was was wondering if it's possible to do the reverse: share a mac's wireless internet connection through the ethernet port.Ideally, the setup I want is to have my iMac connected to wifi and have my xbox 360 connected to the iMac with an ethernet cable.
View 2 Replies View RelatedI've had my imac for over a year and a half now with no troubles. But, the last couple of weeks my wireless keyboard has not been working. A message pops up saying that the connection has been lost. Then, the wired mouse moves around....but won't select or highlight anything...the 'click' doesn't work. Then all of a sudden everything goes back to normal.
View 2 Replies View RelatedMy Internet has just been upgraded from 2MB/s to 10MB/s. To confirm the upgrade I have used [URL:...] to test my upload/download speeds with Firefox and Safari. I have 2 computers on my network which consists of a cable modem connected to a white airport base station with 128 bit WEP encryption in 802.11 b/g compatible mode. The 2 computers are a dual 2.8 ghz MacPro which is wired directly into the Airport base station by Ethernet and an iMac 1.83 Intel core 2 duo. The much faster MacPro only achieves a download speed of 5.5MB/s over its wired connection while the slower iMac achieves 9.8MB/s - very close to the advertised speed over its wireless connection. These are consistent speeds not one offs so I am wondering why the difference? The MacPro is my main machine so I'd like to have the best speed possible on that. What can I try?
View 2 Replies View RelatedAre the keys on the new wireless keyboard (late 2009) more cramped and smaller than on the wired keyboard, or is the only difference between the two the addition of the number pad?
View 16 Replies View RelatedIs it possible to create a network where the broadband router is wireless to a time capsule which in turn is hard wired to a 360 thus allowing the 360 to access the internet?
broadband router <---[wireless]--->time capsule <---[wired]--->XBOX360
If so can anyone give me any pointers?
I have an additional question about the Airport Express. I am interested in buying one but don't want to commit until I get a few questions answered.
1. I own a D-link wired router and a d-link wireless router. I have been tempted to buy the express, hook it into my wired router and run wireless off of the apple. I want the express so I can run itunes on my stereo from anywhere in the house.
Would there be any advantages to me using the wireless router in conjunction with the airport express instead?2. I am interested in the DHCP comments from above. If I turn off DHCP on the airport express then any friends who come over to use the wireless internet will need to be personally configured. Could I just assign the Airport Express a static IP address on the wired router, keep a DHCP on on the express for my friends and turn off DHCP on the wired router?
3. I have a PS3. I don't want to slow my gaming speed down. I intend on plugging the PS3 into my existing router (wired or wireless router, I will have it wired though) Will daisy chaining the express off of the router slow down my PS3 connection when other users are not using it?