I just ran my bootcamp partition for the first time on my newly installed Parallels. But when I ran it for the second time, the Win 7 loading icon no longer popped up. Instead, the Vista loading bars appeared and now appear each time I run Parallels, though Win 7 desktop will load up after the Vista loading bar.
Why is that?
I have been running Vista in Parallels 5 on my rev B 1.86 MBA SSD. Now I see version 6 is out and what is the opinion about the speed increase? Btw, I still run Leopard 10.5 on my MBA.
View 2 Replies View RelatedI think I will just use Vista for gaming and a bit photoshop or photo editing stuffs? What is the big differences with 32 and 64 bit? Going to use with the new MBP 17".
View 3 Replies View RelatedI was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
I recently installed Windows vista using going through parallels because my bootcamp failed a while ago. This partition also acts as my bootcamp. Well The internet on parallels works fine because it is using osx network, but when i boot into bootcamp the network drivers seem to be missing. I cant figure it out, but it says the ethernet and network drivers are not there. I cant find the drivers on the internet anywhere and when i use the vista disk i have it still does not want to install them.
View 2 Replies View RelatedWhen i try to install windows vista through parallels it cancels the download during the expanding files step.
View 1 Replies View RelatedI'm trying to run Boot Camp Vista through Parallels but i don't know how to set it up and can't find a guide anywhere. There's one in the settings but that skips over the most complicated bits. Anybody know of a guide for doing this or know how to do this?
View 13 Replies View RelatedSo I downloaded parallels 4 and set up a virtual machine with Vista (I couldn't get a copy of XP so I had to settle). I then installed an educational version of AutoCAD 2010, it installs and everything but when I open the program it begins loading until a point where it doesn't respond. I have reinstalled it, uninstalled it and installed it again, but the same exact thing happens each time.
When AutoCAD stops responding it says this at the bottom of the screen:
Opening: C:UsersAdministratorAppDataLocalAutodeskAutoCAD 2010R18.0enuTemplateacad.dwt
I don't know whether that is relevant or not. I read somewhere that to run AutoCAD 2010 on vista you need 2GB of memory. With parallels the way it is i can only commit 1GB of memory to vista. I was wondering if it would work on bootcamp where i can devote all my memory to windows. Is it even possible to uninstall parallels and all that and switch to bootcamp? If thats even possible would I be able to preserve my copy of vista or would I have to get a new license?
I want to make sure I'm doing this properly. I recently acquired a Macbook Pro, along with legit copy of Win Vista. So here's what I did:1. Reinstall Mac OS X from scratch, then get ALL the software updates. Perfectly clean! Then installed the additional applications from the 2nd disk (Q1: Is that second disk what is called Leopard?)2. Backed up my Mac with Time Machine to my external Seagate drive.3. Used Bootcamp to create a partition, then install Windows Vista Home Basic edition on to it, then installed the Macbook Pro drivers, then got ALL the microsoft updates (which took forever).
View 2 Replies View RelatedIs it possible to transfer a windows vista license to an iMac from a PC when using parallels? I will no longer be using the PC and would like not to have to buy a new windows license.
Info:
iMac
I downloaded parallels 4 and set up a virtual machine with Vista (I couldn't get a copy of XP so I had to settle). I then installed an educational version of AutoCAD 2010, it installs and everything but when I open the program it begins loading until a point where it doesn't respond. I have reinstalled it, uninstalled it and installed it again, but the same exact thing happens each time. When AutoCAD stops responding it says this at the bottom of the screen:
Opening: C:UsersAdministratorAppDataLocalAutodeskAutoCAD 2010R18.0enuTemplateacad.dwt
I don't know whether that is relevant or not. I read somewhere that to run AutoCAD 2010 on vista you need 2GB of memory. With parallels the way it is I can only commit 1GB of memory to vista. I was wondering if it would work on bootcamp where i can devote all my memory to windows. Is it even possible to uninstall parallels and all that and switch to bootcamp? If thats even possible would I be able to preserve my copy of vista or would i have to get a new license?
So, when using bootcamp today I was installing Republic commando for PC. While it loaded, it froze. So I turned it off and back on, but the windows parition wouldn't start up while loading. Neither did mac, unless I used the safe boot. It wouldn't detect my mouse, and I had to replug it. And finally, I discovered my sound didn't work. It shows that its at top volume, and its locked, with a transparent volume icon. So I can't listen to anything, use my windows parition, and I have to use safe boot (which takes about five minutes) to start up my mac parition. Is there any way to fix this?
View 2 Replies View RelatedI've had a Vista 32 PC and it booted pretty fast. I now have a fully loaded iMac (newest one available) and Vista takes abnormally long to start. OS X boots very fast, and once Vista is loaded, it runs normal, no problems. I'm just wondering if there is a way to reduce the boot time, and why it would take longer to boot on this more powerful computer than my last generic PC, or if that's just a drawback of boot camp.
View 6 Replies View RelatedQuick question - I currently run Vista off of Boot Camp; is Parallels a fairly straightforward installation that then lets me launch Vista off of my Boot Camp partition, or do I need to reinstall Vista onto another (separate) partition for Parallels?
View 2 Replies View RelatedI have Parallels 3 installed, mostly to run MS Money. Last night I installed Snow Leopard, unaware that Parallels 3 is not compatible. It appears that I need to go out and buy Parallels 4 as that will work with Snow Leopard.
My question is will all my data within Windows remain if I install 4 or will it be a completely new Windows? And if so, how do I go in and retrieve my MS Money data as I can no longer access it with Parallels 3.
when i start up my macbook there comes a grey loading bar under the apple and it takes 15 min for my mac to start up...
View 4 Replies View RelatedIs it better for me to buy the upgrade for windows 7, from vista to windows 7 or to buy the full copy? If i buy the fully version, should i get rid of my pardon, and re-do it with bootcamp, or should i just do it over my current pardon? (Vista) I just want the best way, less pain, less anger. Im willing to pay more for full IF IT IS THE BEST way to do it.
View 1 Replies View RelatedI just got a Parallels desktop 7 and I try to install it but the cd doesn't start when its inserted. The macbook pro I just got it few days back so its the last version.
Info:
MacBook Pro with Retina display
when I click iPhoto it attempts to load photos but never completes task therebye rendering it useless. I have around 3000 pics in there.!
Info:
IMAC G5, Mac OS X (10.3.x), 512 MB DDR SDRAM
I have this program installed called KeyAccess (or KeyServer). It is used by my college to allow me access to the licenses to a slew of software provided by the school. However, it loads at startup, and I have no idea how to prevent it from doing so. There's no option to configure it not to, I have tried looking for an entry in StartupItems and Login Items of my Accounts preferences. It is located in the Preferences Pane, its not really a standalone program.
View 5 Replies View RelatedMy 2006(ish) Intel core 2duo 2.16 mhz 20" imac wont start up, it only stays at the loading screen, how can i fix this?
Info:
iPhone 3GS, iOS 5
You know the start up page that appears when you press the power button, the blue ish white one with the apple logo on the middle and a circular loading thing? Well mine won't stop loading. I left it on all night and it still hasn't finished loading. Its the circular one that just goes around and around.
Info:
MacBook Pro (13-inch Early 2011), iOS 5.1
I have two external hard drives attached to my MacBook Pro (running Lion) using a powered USB hub. What is the best procedure to use when shutting down the computer at the end of the night, and when turning it on the next morning. I didn't turn the computer off much when I used Snow Leopard so I can't really say that it has something to do with Lion, but I'm using Lion now and I am shutting down every night. Every morning when I turn the computer on the external hard drives don't load. I have to disconnect all the wires from the hub then first reconnect the hub to the computer, next the power to the hub, then the hard drives one at a time as they load. I would like to turn the computer on and have the external hard drives load automatically.
Info:
MacBook
When i start up my macbook pro it shows a loading icon n after the loading completes it shuts down! What do i do???
Info:
MacBook Pro, OS X Mavericks (10.9.4)
So jar launcher wasn't working for me so I decided to restart my computer but when I did there was a loading bar under the apple logo and it goes half way then freezes I am running os x yosemite 10.10 I found like a download of this online and no it wasn't torrent. So I turned it off again and tried it again and something happened what do I do right now its turned off.
Info:
MacBook Pro, OS X Mavericks (10.9.3), 10.10 yosemite new mac version
I'm running Windows vista ultimate on my Imac and lately the mouse started acting weird on Vista, it's jumping around and moving unpredictable,and also i use windows in spaces, and i can't switch to spaces anymore until i click control + command, please let me know what the problem is, ohh i'm running a USB G9 Logitech mouse.
View 1 Replies View RelatedI have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
I installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista.
On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
Does anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done;
1.Open up bootcamp assistant
2.Partition, divide equally(116GB each)
3.Insert Vista disk and start installation
4.Install Vista and insert CD key
5.custom installation
6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
I am unable to start Parallels Desktop 7 since upgrading to Mavericks on my IMac. The error messages tell me that visualization support is disabled, unable to load Parallels driver and unable to start the virtual machine.
Info:
iMac (27-inch Mid 2011), OS X Mavericks (10.9.4)
