I have been running Vista in Parallels 5 on my rev B 1.86 MBA SSD. Now I see version 6 is out and what is the opinion about the speed increase? Btw, I still run Leopard 10.5 on my MBA.
View 2 RepliesI think I will just use Vista for gaming and a bit photoshop or photo editing stuffs? What is the big differences with 32 and 64 bit? Going to use with the new MBP 17".
View 3 Replies View RelatedI was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
I recently installed Windows vista using going through parallels because my bootcamp failed a while ago. This partition also acts as my bootcamp. Well The internet on parallels works fine because it is using osx network, but when i boot into bootcamp the network drivers seem to be missing. I cant figure it out, but it says the ethernet and network drivers are not there. I cant find the drivers on the internet anywhere and when i use the vista disk i have it still does not want to install them.
View 2 Replies View RelatedWhen i try to install windows vista through parallels it cancels the download during the expanding files step.
View 1 Replies View RelatedI just ran my bootcamp partition for the first time on my newly installed Parallels. But when I ran it for the second time, the Win 7 loading icon no longer popped up. Instead, the Vista loading bars appeared and now appear each time I run Parallels, though Win 7 desktop will load up after the Vista loading bar.
Why is that?
I'm trying to run Boot Camp Vista through Parallels but i don't know how to set it up and can't find a guide anywhere. There's one in the settings but that skips over the most complicated bits. Anybody know of a guide for doing this or know how to do this?
View 13 Replies View RelatedSo I downloaded parallels 4 and set up a virtual machine with Vista (I couldn't get a copy of XP so I had to settle). I then installed an educational version of AutoCAD 2010, it installs and everything but when I open the program it begins loading until a point where it doesn't respond. I have reinstalled it, uninstalled it and installed it again, but the same exact thing happens each time.
When AutoCAD stops responding it says this at the bottom of the screen:
Opening: C:UsersAdministratorAppDataLocalAutodeskAutoCAD 2010R18.0enuTemplateacad.dwt
I don't know whether that is relevant or not. I read somewhere that to run AutoCAD 2010 on vista you need 2GB of memory. With parallels the way it is i can only commit 1GB of memory to vista. I was wondering if it would work on bootcamp where i can devote all my memory to windows. Is it even possible to uninstall parallels and all that and switch to bootcamp? If thats even possible would I be able to preserve my copy of vista or would I have to get a new license?
I want to make sure I'm doing this properly. I recently acquired a Macbook Pro, along with legit copy of Win Vista. So here's what I did:1. Reinstall Mac OS X from scratch, then get ALL the software updates. Perfectly clean! Then installed the additional applications from the 2nd disk (Q1: Is that second disk what is called Leopard?)2. Backed up my Mac with Time Machine to my external Seagate drive.3. Used Bootcamp to create a partition, then install Windows Vista Home Basic edition on to it, then installed the Macbook Pro drivers, then got ALL the microsoft updates (which took forever).
View 2 Replies View RelatedIs it possible to transfer a windows vista license to an iMac from a PC when using parallels? I will no longer be using the PC and would like not to have to buy a new windows license.
Info:
iMac
I downloaded parallels 4 and set up a virtual machine with Vista (I couldn't get a copy of XP so I had to settle). I then installed an educational version of AutoCAD 2010, it installs and everything but when I open the program it begins loading until a point where it doesn't respond. I have reinstalled it, uninstalled it and installed it again, but the same exact thing happens each time. When AutoCAD stops responding it says this at the bottom of the screen:
Opening: C:UsersAdministratorAppDataLocalAutodeskAutoCAD 2010R18.0enuTemplateacad.dwt
I don't know whether that is relevant or not. I read somewhere that to run AutoCAD 2010 on vista you need 2GB of memory. With parallels the way it is I can only commit 1GB of memory to vista. I was wondering if it would work on bootcamp where i can devote all my memory to windows. Is it even possible to uninstall parallels and all that and switch to bootcamp? If thats even possible would I be able to preserve my copy of vista or would i have to get a new license?
Quick question - I currently run Vista off of Boot Camp; is Parallels a fairly straightforward installation that then lets me launch Vista off of my Boot Camp partition, or do I need to reinstall Vista onto another (separate) partition for Parallels?
View 2 Replies View RelatedI have Parallels 3 installed, mostly to run MS Money. Last night I installed Snow Leopard, unaware that Parallels 3 is not compatible. It appears that I need to go out and buy Parallels 4 as that will work with Snow Leopard.
My question is will all my data within Windows remain if I install 4 or will it be a completely new Windows? And if so, how do I go in and retrieve my MS Money data as I can no longer access it with Parallels 3.
Is it better for me to buy the upgrade for windows 7, from vista to windows 7 or to buy the full copy? If i buy the fully version, should i get rid of my pardon, and re-do it with bootcamp, or should i just do it over my current pardon? (Vista) I just want the best way, less pain, less anger. Im willing to pay more for full IF IT IS THE BEST way to do it.
View 1 Replies View RelatedI'm running Windows vista ultimate on my Imac and lately the mouse started acting weird on Vista, it's jumping around and moving unpredictable,and also i use windows in spaces, and i can't switch to spaces anymore until i click control + command, please let me know what the problem is, ohh i'm running a USB G9 Logitech mouse.
View 1 Replies View RelatedI have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
I installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista.
On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
Does anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done;
1.Open up bootcamp assistant
2.Partition, divide equally(116GB each)
3.Insert Vista disk and start installation
4.Install Vista and insert CD key
5.custom installation
6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
I just bought a new MacBook pro 1 week old. I partioned my hard drive and installed a clean copy of Windows Vista Ultimate on one side. I then downloaded skype, but my internal microphone will not work. I tried everything. Can someone help me out with this issue.
View 3 Replies View RelatedLast night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
I've installed the drivers, and when I start up in Windows, neither the internet or the wireless pick up.
Using Windows Vista Home Premium. The little wireless icon in the tray just has the big X, so it's literally picking up nothing. I also can't connect via ethernet.
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
I burned numerous dvd's with my old Toshiba laptop for all of my videos and such with Windows XP. Now after my Toshiba crapped out and I switched to a Mac I was wondering why when I put the DVD into the laptop (MacBook Pro Intel processor) why I can only see the name of the dvd and not the contents. I hope someone can help me since I hate having to boot up Windows in Parallels and then play using Windows or drag it to my mac partition since this takes time and I just really hate having to see Windows load on my Mac. Anyones help is greatly appreciated.
View 1 Replies View Relatedim about to install windows on my macbook via bootcamp. However, i will use the same partition for parallels, which means that my ram is goign to be damaged. I wanted to know which os did u recomment me to install. Does windows 7 hog more cpu and ram than vista?
View 13 Replies View RelatedI am trying to set up a Parallels 4 VM for a Windows 7 x64 Build 7000 boot camp partition, but parallels tools will not install. Half way through the process, a windows unsigned driver security box pops up, and when I tell it to install anyway, it still rolls back the installation process and I get the message "An error has occured while installing parallels tools, click OK to restart your computer and try again." or something to that effect. I have tried this about 15 times, and I have tried uninstalling/deleting the VM and re-creating the VM to no avail.
What I want to know: Is there a way to manually install Parallels Tools while running in the boot camp partition, just like installing any other application? I want to install it outside of Parallels, since for some reason it keeps screwing itself up when trying to set up the drivers as a VM.
I have parallels 4 installed and I want to install windows XP. My school gives us legal copies of windows 98 and a windows xp upgrade. However, neither of these comes in the form of a CD image. They are both .exe files. Parellels asks for a CD or CD image. Is there a way to install windows 98 from an .exe in parallels?
And if so will I be able to use the windows xp upgrade once i have windows 98 installed? I haven't yet tried creating a CD image with the exe file on it. I don't know if this would work because it's all in one file and not a typical windows install disk.
I have a 15" MBP. Hardware in my sig.
I'm getting Win7 this week. I'm getting it free from school and unsure at this point whether it will be 32 or 64 bit. That said, here's what I want to do with my setup.
1: School. I have to use Office 2007 for my classes. Office 2008 for Mac is not supported, because some of the formulas that you create in 2008 won't convert correctly into 2007 format and I can't have that. I will also use IE due to the fact that neither Firefox nor Safari will play my Mediasite classes correctly in Silverlight. Only IE allows me to speed up the playback. I am going to use Parallels 5 for this.
2: I game, but not much. The one game I love and will definitely put on my Mac is Morrowind. I want to use Boot Camp for this reason.
Soooo, I have been told that if I'm going to install Windows under Boot Camp that I should do that install first. Then install Parallels. I'm really not sure how to do any of this. I understand that I will only need to install Windows a single time and that it should work under with Boot Camp or Parallels.
i have the Boot Camp install PDF from the Apple site, but I'd love some tips, tricks, help, advice, words of wisdom, etc., from this forum. Please tell me what you think about which to install first, what approach to take, how much HDD space I should partition when I install under Boot Camp, etc.
I have spent many hours now trying to get on the internet from Parallels. I read several threads on this forum, searched Google, and poked around my computer as described below, but to no avail.I am using a MacBook with an Intel processor and OS 10.5.8. I am running Windows XP version 2002 via Parallels 5.A list of things I have tried:1. Open Internet Explorer, receive message saying "web page is not available offline; to view click Connect," click Connect, see popup labeled "Dial-up Connection" which is of no use whatever.
View 14 Replies View RelatedI got a copy of Win7 from school and started installing it on my wife's computer (I have my own Win7 copy). I need to uninstall it...don't ask. I just need to know how to get a partially installed copy of Windows uninstalled. Each time I put the disc in and launch Parallels it wants to continue the install, which I can't do (faulty product key). Anyone know how to uninstall at this point??
View 8 Replies View RelatedI bought my first Macbook Pro 15? and I installed Windows 7 64-bit using bootcamp without any problem. Thereafter, I used Parallels 5 to create a virtual machine for Windows 7 and be able to run Windows 7 within the Snow Leopard OS and be able to move back and forth between the two operating systems. However, Parallels 5 created two virtual machines, one called Boot Camp and one called Windows 7. When I was installing Parallels I chose to create the Windows 7 virtual machine but never asked Parallels to create the Boot Camp virtual machine. Where this other virtual machine is coming from? Am I able to delete it without creating any problem or conflicts? Moreover, I have two shortcut icons on the Mac pointing to either of these two partitions. Similarly I have two windows folders on the right side of the Mac dock. What should I do to have only the Windows 7 virtual machine without creating any problems or conflicts?
View 2 Replies View Related