Windows On Mac :: Hangs At Flashing Underscore For 45 Seconds Before Booting
Jan 16, 2010
I've now properly installed Windows 7 to my MacBook, but now I'm getting this problem and can't find a fix.
Basically, I turn my MacBook on, select Windows, and it leaves me at a black screen with a flashing underscore for 45 seconds before it actually begins to do anything (making boot times unbarably slow). This is seriously annoying me, but it doesn't seem to have a fix. Edit: Oh, some details. Windows 7 Ultimate (64 bit), MacBook Pro 13" (2009), Snow Leopard installed, using rEFIt to multi-boot, bootcamp 3.0, and have never had this problem with any other version of Windows.
I recently installed Windows 7 Ultimate on my 2007 iMac, and so far everything is running flawlessly EXCEPT that every time I boot in to Windows I am greeted with a flashing underscore for about 55 seconds before the boot process continues. Has anyone any idea what the cause and solution to this little irritating problem might be? I used the drivers included on the SL DVD in case anyone is wondering. Here is a short video clip showing the whole boot process: [URL]
I freshly installed mac osx leopard on my aluminium iMac 24" I updated to 10.5.8 the latest. I made an bootcamp disk of 80gig. But all the time when i try to install windows i only get a black screen with flashing underscore. i've tried, windows xp home english, windows xp home dutch, windows xp professional sp3 the first to are sp2. And i know my windows xp home english works because i've used many times before to install windows on my mac using bootcamp. What could i be doing wrong? ive resetted the disk permissions (i have no idea how it's called in english)
This only happens when I choose to boot into windows. The screen sort of hangs for about 20 seconds in a black screen with an underscore at the top left corner before even starting to boot into windows. I know its normal for this to happen for like 5 seconds tops, but this is happening for about 20 seconds and its dreadful trying to boot into Windows 7 because it takes so long. When windows is done starting up i don't even get any messages saying startup failed or something like that. This is so annoying that I even reinstalled everything but the same thing happened.
I was going to download windows XP using bootcamp and I did everything up to the point to the point where you choose FAT or NTSF. Well the only thing there was NTSF so I decided to cancel it. It said it was going to reboot so I waited and it restarted. I ejected the disk and now the screen is black and theres a white underscore flashing. I restarted it and its still not workingand the screen is still black. How do I fix it? I already tried the ctr+option+p+r thing wiht no luck. Do I have to reinstall OSX again?
I tried to install Windows 7 via Bootcamp a couple weeks back, but shortly after it failed, I deleted the Bootcamp partition in Bootcamp Assistant. However, whenever I want to boot my computer, it tries to go into the Windows Installation, but it gets stuck on the flashing underscore on the top left of the black screen. Henceforth, whenever I want to boot into OSX, I have to hold down both ALT keys. is there any way of fixing this so the iMac boots STRAIGHT into OSX (like normally)
1) I have on one of the drives a separate OS X partition to boot from (10.4.11). It hangs just as it gets to the desktop and goes no further. I never get a menu bar or a pointer or any of my desktop icons. The booting never finishes. I've tried to re-install the OS, except for problem number 2.
2) When I try to boot from my Mac Pro CD ROM, it does the same thing. It gets to the blue desktop and stops there. No pointer, menu bar, or anything. So I can never get to fix problem number 1.
My main bootable drive in bay 1 still boots just fine, although it frequently seems to take a tad longer. But it does finish the booting process so I have a partition to work with.
I recently replaced the stock cooler on my X1900 graphics card, and that's when the problems started, though I'm not clear how that could be the cause.
I've recently upgraded my MacBook Pro into MAC OS X 10.6.2 and I started to experience a low booting time (over 17 seconds). Another issue, when I start the computer I always get the starting screen where the apple logo is shown as zoomed. I tried to check the display but its fine.
On starting up, my macbook pro shuts down after 25 seconds of booting up. The time bar comes on for a while before it simply goes blank and switches off without any notification. Battery appears charged. Could it be a virus?
I've recently replaced my video card because the previous one had problems displaying garbled videos on screen.
However, when I took it back from the repair, and start booting up my computer, i hear the chime and it shows me flashing globe symbol as it's booting up. (when it's supposed to show me the apple symbol).
I'm running Leopard 10.5.8 on an iMac and continuously have problems booting the machine. The boot process occasionally hangs at the gray screen, but more often it hangs at the blue screen. Sometimes it makes it to the login screen where the cursor occasionally freezes. Whenever these problems occur I have to shut down by holding down the start button, then restart again. Usually the second boot is successful. This booting problem occurs frequently, even after running Disk Warrior and repairing permissions. I don't think this is normal behavior. Has anyone else had such problems? Is there anything I can do to correct this behavior, or is this something that needs to be fixed by Apple?
My MacBook was fine until it fell last night. It wasn't a big fall. It had actually been very close to the floor, but now when I try to start it a flashing folder with a question mark shows up. There is no clicking noise. It makes the sound like it is going to start. I started it up while holding the option key and Macintosh HD shows up with an arrow underneath it. However, when I click on the arrow, it freezes, eventually disappears and then the computer shuts down.
I am currently in Spain and my installation discs that came with my computer are back in the US. Is my best bet to have someone send me them or is that not even going to help? I also read a post that someone took out their hard drive, reseated it and then when they turned their computer back on everything was fine. Could this be a possibility? Would I need my installation discs after doing that?
My iMac will not boot normally only in safe mode and then all programes keep flashing.Safari and mail continuously flashing grey lines..Reset the PRAM and it worked but turned the computer off and on again and its gone back to same problem...It's an iMac 27" late 2013 3.2 ghz
Info: iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
i just upgraded my ibook g3 hd to 20gb. i put in my tiger install disc 1 and i let it go while i was out of the room. i heard the startup chime from another room, later i went to see it with a blue screen and mouse cursor. it wouldn't do anything. then i restarted it with the install disc again, holding C down, and it booted to a grey screen which after about a minute went to the flashing folder with the ? mark.
I have Windows Xp and Windows 7 on two different hard drives in my Mac Pro. Windows 7 had been working fine, but I needed XP to run some older programs that 7 couldn't do. I have been working in XP some time now but when I try to boot from the Windows 7 drive it just reverts to the XP one. Even when I click on the Windows 7 drive to make it the start up drive it still goes to XP. Is there something I'm doing wrong?
I have an external hard drive which I have successfully installed Windows XP SP3 onto. It was a long and painful process but I finally was able to get a modified XP install disc ready and from a Dell PC running Windows was able to install onto the external hard drive and I'm able to boot from it and everything. I did this on a PC because I couldn't for the life of me figure out how to boot correctly from an external drive in Mac.
Anyway, the hardest part is in the past and now my only problem is how to boot this external hard drive from my macbook, which is primarily what I want to use it on. I currently have a Macbook with three operating systems on it: Mac OS 10.5.8, Ubuntu Linux, and Windows XP SP3. I use rEFIt to boot into these operating systems. I tried using rEFIt to boot into XP on the external hard drive but it just gives me the legacy error messages saying that it couldn't load and noting the booting legacy os is not well supported by mac.
This really isn't a bad thing, on my iMac i5 with a the stock configuration configured with 2 cores and 3GB of RAM on Windows 7 Profession 32-bit, my VM boots in 2 seconds; the boot is so fast that it displays the Vista-like scroll instead of the 7 splash screen during boot. Basically I'm curious what's going on here? I'd like to do the same on Mac Pro which takes about a full minute for Windows to load up. The drives on my a Mac Pro about 5x faster than the iMac and I have a 4 processors and 4GB of RAM allocated to Windows... Both are running Parallels 5 for VM and both uses 64GB for the virtual disk.
I did the search, found nothing. XP Pro 2002, The install hangs while "preparing installation", after asking for the key and naming the computer and choosing network options, but before the "installing windows" button activates.
My guess is that this is a Windows issue rather than a Parallels or Mac issue. But I can't be the only one. Anyone else have and solve this?
I am using a Mac Mini with a Realtek USB wireless dongle to connect to the internet. The software and drivers appear connected perfectly and i see the wireless utility and I can access my wireless network, which says signal strength 100%. I connect to it and it accepts the wireless key. Says connected. Then after a few seconds the connection is lost and it says 'Disconnected'. A few seconds later it connects then disconnects and this continues indefinitely but Safari never allows me to access any webpages.Â
Info: Mac mini, Mac OS X (10.5.6), USB Wireless Dongle
2010 MacBook Pro 13' Mac OS X Snow Leopard 10.6.4 Windows 7 Ultimate x64 Bootcamp 3.0.2
I'm trying to install Windows on my computer, and the install works fine, with no issues. On my very first boot into the desktop, everything looks OK. But when I reboot Windows, it freezes on "Installing device driver..." and then I have to press the power button to turn the computer off. I noticed that the device driver it's trying to install is "IEEE 1394". Then, when I restart my computer it freezes on the "Welcome" screen and I have to restart, only to be met with the same "Welcome" screen freeze every time. I have tried all 3 different "Safe Mode" options, burned several different Windows install discs and tried to repair my Windows install using the Windows DVD, but the repair program says that my Windows version isn't compatible with the disc version, even though it's the one I originally installed it with. I even saw in one thread that a guy fixed this same exact problem on his Mac by pressing the power button in anticipation just before the freeze. I tried that solution many times and it didn't work either. I also saw on another website some console commands I can use to try and resolve my issue, but if I cannot access a console, how am I supposed to use it?! I noticed that "Loading Driver C:System32DRIVERSCLASSPNP.SYS" hangs for quite some time before loading the welcome screen and crashing there. A few times I even notice that it would freeze on that process itself. Either way, I can't get into Windows. I've tried every solution I could find, and none of them worked at all. I'm really mad and sad right now because this is so frustrating. I just want to be able to get Windows on there so I can play my favorite games, use Office and work in Visual C++ Express Edition.
I have a 27" imac and I've installed windows 7 64-bit using boot camp. Everything works except the wireless keyboard and mouse, which work for about 20 seconds after starting up and then stop. The bluetooth control panel says they're still connected, but they aren't working, so I'm forced to connect an old wired kb/mouse.
its a PC and i know this is a mac only forum but i dont have the time to sign up for another forum. anyways, i boot the pc, it brings me to a menu where it has the options to boot in safe mode, boot normally, etc. i choose boot windows normally and it starts to load windows, however, it freezes about 5-10 seconds into the loading screen and it brings me back to the same boot menu. idk what to do!
Just got my copy of Windows 7 Home Premium and decided to install it via bootcamp to try out Aion! but when the mac restarts to install Windows 7 I always get the flashing _ I left for an hour or so but it stays like that! I have the full final copy of Windows 7!
I've recently discovered that while searching in Finder I am not getting any results of files that have underscores in their file names. For example, a photographer sent over hundreds of files that are named "IMG_1234.jpg." When I search in that folder for any files named "34", I get no results, even though I can see the file is right there. Files with names like "AC-1234.jpg" are fine and come up in the results right away. Â
What gives with the underscore? Is this a Mavericks thing? I've never had this issue before with Finder. Is there a setting I can change to include these file names in my search results?
I can't get Windows 7 Ultimate (64bit or 32bit) to install on my mid 2010 MBP 2.4 Core2Duo 4Gb Ram 250gb hdd). I created a 40gb partition successfully, but I only have A DVD of Windows 7 Upgrade. I have an ISO (legally obtained) of the full version. When I try to install from the upgrade disc with custom installation, not upgrade, I get to "Expanding Windows Files" and then it hangs at 0% forever. I have a 320gb external hard drive. I have already restored my computer with Time Machine today. Still, no luck.
Is this normal? I've tried changing the number of cores to use at startup as 2 and its a second faster....a second! Anyway, is it normal for it to take 1 minute 45 to start up? I didn't seem to take that long before but its suddenly started doing it.
EDIT: Just to point out, its the 2.53ghz, 4gb macbook pro with 250gb HDD
I cannot open iTunes. Message "iTunes quit unexpectedly". It only opens for about 5 seconds where there is a message about restoring windows, which makes no sense. I have shut down, restarted, checked for software updates. I am running OS 10.7 (lion).
I get this massive error message: Process: iTunes [1312] Path: /Applications/iTunes.app/Contents/MacOS/iTunes Identifier: com.apple.iTunes Version: 10.6 (10.6) Build Info: iTunes-10604001~1 [Log] .....
I am running OSX 10.5.8. A little while ago I successfully Boot-Camped my hard drive and installed Windows 7, but i recently got a new hard drive. I copied over my OSX partition successfully, but didn't copy over the Windows partition. On my new drive I went through the boot camp assistant and created a partition and inserted the Windows 7 disc. But when it restarts, it just seems to hang there- it's just a black screen with a blinking white underscore(_).
I have been told that because I copied over my OSX partition it didn't set up the MBR on the new disk, is their any way to fix this? (besides doing a clean install of OSX) Are there any software or guides available to help me fix this?
I've been running Windows 7 64 bit on my MacBook Pro for many months now and have had no problems with it, however last week my BootCamp partition decided not to launch anymore and instead it goes straight into Startup Repair. Startup Repair is never able to find a problem and shuts my computer down straight after. Now I'm stuck using OS X without the programs and such I need.
