Windows On Mac :: Extending Monitor Does Not Seem To Work
Jul 21, 2009
Recently I wiped OS X out and installed XP alone. I used the Leopard disc to install the necessary drivers and everything seems to work well except for my second monitor.
I have an HP w1907 connected to my MBP through DVI, and I followed my usual process of:
Right Click on Desktop > Properties > Settings > Click on second monitor > Click "Extend Desktop to this device" ...and nothing seems to happen. I've tried changing the resolution, unplugging the monitor and trying again, but I can't get any result.
View 4 Replies
ADVERTISEMENT
Nov 28, 2010
I was wondering how I would go about expanding the windows partition (I have a ton of free space on the mac side and about 23 GB on the Windows side).
As I understand it, a way to do this would be to go into Disk Utility, shrink the OSX drive, boot into Windows, type in "Disk Management" in the run box, and then click something along the lines of "expand into free space".
View 3 Replies
View Related
Jul 23, 2009
I got a Mac Mini today and started setting it up. I was getting ready to plug it into my monitor, which I used on my old Windows Machine, and I realized that the Mac Mini would not plug into my monitor. I did try using the adapter that came with my Mac Mini, but it didn't work. My Monitor has a VGA port, yet the adapter wouldn't. I do not want to buy an Apple monitor because they are too expensive for me.
View 5 Replies
View Related
Jun 27, 2009
I have a 22" Dell external monitor on my MBP. I know that I just close the cover to my MBP to shut off the screen. What do I do in those instances that I want to use both screens? There has to be something simpler than restarting the MBP?
View 3 Replies
View Related
Dec 9, 2010
Best USB extending?
View 1 Replies
View Related
Apr 19, 2009
I have an Apple mini DVI to VGA adapter from my imac to a second, mirror monitor. It works fine. However, how can I extend the length from the mini DVI side of the adapter, as currently this adapter (miniDVD to VGA connector) is only 6 inches long?
View 3 Replies
View Related
Sep 8, 2009
I currently use a time capsule for wifi at home. It's located in my basement. The problem is the signal strength on the second floor isn't the greatest. I was wondering if I could extend the network by running a cable from the time capsule to the second floor and plug it into an airport express. Is this setup referred to as a "bridge"?
View 1 Replies
View Related
Jun 8, 2010
Alright, I have an old Macbook Pro that is unused, and I thought the other day it might be worth investigating using it as a second monitor, getting extra computing power, etc.
So, is it possible to use a second macbook pro as a second display for my current macbook pro?
Or, is there something else I could do with it that might make use of it asides from selling it? (It wouldn't fetch much)
View 1 Replies
View Related
Aug 27, 2010
My MacBook Pro doesn't get receive wifi very well in my office, but my partners PC laptop does. I know there is a way to set up internet sharing so that the PC shares its internet connection to my laptop, but I do not know how to do this.
I'm running Mac OS 10.5.8, he has XP.
View 1 Replies
View Related
Dec 24, 2010
I have an Airport Extreme (goes up to N) as my main router, and I'd like to extend my signal with a Linksys router that is a/b/g (no N support) and maybe an a/b/g Airport Express. Is this possible? Will I have to downgrade my network to G? Also, how do I go about doing this? My plan is to plug them into Ethernet spots throughout the house, but I don't want to have 3 different networks, so how do I make them wireless extenders as opposed to standalone routers?
Would it be worth it just to spring for a new Airport Express (that supports N)? If I do that, do I need to plug it into Ethernet to extend my signal, or will it be able to pick up the signal wirelessly and then extend it?
View 1 Replies
View Related
Feb 2, 2010
I got a friend who just moved into one of our apartments at back of our home and I want to extend the range of my wireless router so he can connect his PS3. The only two ideas I have so far was to get an extending phone cable and move the modem as close down the hall of my second floor abode, however I still don't think the signal strength be enough.
So I found out be repeaters and I like an explanation more as to how these works, what model/brand would be easy to configure for mac, cons, etc.
View 7 Replies
View Related
Mar 4, 2008
Will any monitor work with a mac mini?
View 4 Replies
View Related
Mar 16, 2009
Just bought a new monitor and hooked it up to my MBA. Screen saver looks fine but the page is displayed off screen far left and the cursor is not visible at all. Works fine with my Powerbook so I don't think it's a monitor problem. Are there settings which could be wrong?
View 4 Replies
View Related
Nov 9, 2009
so there is my question. will the speakers work as you use the mac as a monitor?
View 2 Replies
View Related
Jan 12, 2010
When I got my 26" monitor the other day it worked right out of the box plugging into my 13" Macbook Pro. I am slaving it off the macbook w/o using the LED screen on the MBP. Just the external.
Yesterday I was trying to improve the image quality and changed the frequency (common bad decision) and am getting the common "out of range" message.
Now if I run the external WITH the 13" LED of the MBP it is fine as it's using a different profile/preferences to set the right frequency.
I have deleted the pref file that everyone on the net says to do with no luck
I have reset the PRAM and VRAM as suggested with no help.
Is there another location for the preferences related to this in Snow Leopard as most help I am finding is a year old to several years old. The pref to delete in old posts just doesn't do the trick.
Again the monitor works fine when used in conjunction with the screen on the MBP but is out of range when running solo with the MBP lid closed.
View 2 Replies
View Related
Sep 14, 2009
I have the last G5 imac made before Apple went Intel 4 years ago. It works fine. It has wifi.
But heres the deal. I just moved into an apartment in NYC. There are TONS of free wifi hotspots down the block from me that I can pick up on my ipod touch when I go outside. But INSIDE my apartment, my imac is out of range.
I need SPECIFIC advice on what I need to extend the reach of my imac to pic up wifi signals.
Again, these are FREE hotspots, so it's all legal.
Do I need an antenna? Or something else? Or both? What kind and how would I hook it up. How far is the reach? Be detailed, but keep it simple so a laymen can understand it.
View 2 Replies
View Related
Aug 24, 2009
I have a linksys wireless system set up in my home right now, but am trying to extend my wireless range to a few more rooms. I have tried to set up my Airport Extreme Base Station as a remote and have the linksys as the main station, but it doesn't seem to be working. Does anyone know if this is possible (i.e. have the linksys as a main station and Airport Extreme Base Station as a remote)? One a similar note, even after resetting the Airport Extreme Base Station and connecting it directly to the DSL modem, I cannot connect to the internet. The computers connect fine to the wireless network, but the internet will not load.
View 1 Replies
View Related
Nov 3, 2010
New here and new mac user all together. I have looked quite a bit for an answer to this question but have not found one that applies directly to my situation.
My dilemma is that my apartment complex has free (unsecured) wireless but currently with my macbook pro, I can not register the signal in my living room. I just got Airport Express with the idea of extending the signal to all areas of my apartment. However when I go to "Join current wireless network", the apartment's signal does not show up (two other networks do show up though they are password protected).
I have read here that certain routers are not compatible with Airport Express (is this true?) and I am wondering if that's a possibility here.
Is there a fix for this? Do I need access to the router?
View 2 Replies
View Related
Apr 30, 2012
I use Fusion 4 on my Mac and now need to extend a disk from 200GB to 300GB; VMWare tells me there's not enough space on disk, although it has ~400GB of unused space. Since defragging is not a Mac thing, is there anything else I need/can do to convince Fusion to extend my drive? I know this is a Mac forum but since it's on a Mac *and* VMWare's forum didn't give my anything in almost 2 days...
Info:
MacBook Pro (17-inch Late 2011), Mac OS X (10.7.3)
View 7 Replies
View Related
Oct 12, 2010
I bought my 13"MBP about 2-3 months ago. I mainly use it for uni so It's back and forth (great portability). But I am looking into getting a monitor for my setup at home. I have the hdmi adapter + HDMI cable which I use to connect to my tv in the living room. (52" Bravia). I am looking to spend about $150-$200 no more then that. Apple monitors are out of my price range.
I also have a few questions.
- Is it better to get a monitor with HDMI?
- Is vga/dvi good? How is it for those who have it?
- Is there much difference between 1600 x 900 and 1920 x 1080?
- Will my MBP look fine on any of these monitors?
Here are some that I have been looking at
(URL)
(URL)
View 6 Replies
View Related
Nov 10, 2010
How does it look when doing so, if the resolution is higher than the native. For example, if the monitor resolution is 1650x1050.
View 2 Replies
View Related
Mar 4, 2009
� really want a new Mac Mini and currenly have a Dell monitor from an older PC. Will this Dell monitor work perfectly with the Mini?
View 12 Replies
View Related
Jun 29, 2009
I have a 20inch imac (bought in summer 2007). I am just getting into using it as my primary computer. I was playing around in order to learn more and I found something through Activity Monitor that does not make sense to me.
In the Network Activity tab, I see "Data received:" and "Data sent:" sections. As I browse the web, these numbers change of course, but it seems that the Data received quickly reaches hundreds of megabytes! Right now, Data received: is 540MB and Data sent: is 280MB (after a reboot earlier in the day). I am not using the iMac as a server or anything and I have never seen a Windows PC sending out so many packets in the course of browsing the web. Is this in line with others' experience? Should I be concerned about a spyware program on my iMac?
View 3 Replies
View Related
Jun 14, 2010
I'm working with a Mac Pro (2x3 GHz Dual-Core Intel Xeon, 4 GB RAM) and a dual 23" monitor setup. Quite recently the second monitor stopped responding, after disconnecting everything, moving, and reconnecting. (Everything was boxed lovingly in its original packaging and moved by gentle movers.)
It isn't the monitors � both work fine in the first monitor port. The computer recognizes there is a second monitor attached, allowing me to access Arrangement options under System Preferences > Displays.
The power light on the second monitor comes on, blinking in the following manner (if it were Morse Code): dot dash dot....(then it is dark for about four seconds before repeating the same blinking sequence). It appears to have some sort of meaning.
Any ideas? Is there a way to reset this?
View 2 Replies
View Related
Aug 16, 2010
I bought the mini-display port to dual link dvi adaptor for $99. However, it doesn't work from going from my pc to the imac or from my macbook pro to the imac. I find it retarded that they wouldn't even sell a working adapter.
Has anyone gotten this to work or does anyone know which adapter I can buy to get this going?
Again.
-PC to iMac
-2009 (pre-minidisplay port) dvi to imac.
I need it to be dual link dvi because I want to use it at max resolution.
View 7 Replies
View Related
Jun 24, 2012
when i try to open activity monitor, it's fine for 2 seconds and then i get the rainbow wheel...and i have to end it using force quit.
Info:
MacBook, Mac OS X (10.6.8)
View 3 Replies
View Related
Jul 13, 2009
i am trying to extend a network with an airport express but the airport express cannot get a valid IP address and flashes amber.
my setup is as follows: netgear router/modem which handles PPPoE connected via ethernet to time capsule which handles the wireless network.
time capsule is working fine and has a valid IP address but airport express doesn't.
i have checked 'allow this network to be extended' on the TC, and connection sharing is in bridge mode.
i wonder if someone could help me troubleshoot this
View 2 Replies
View Related
Apr 12, 2009
I can't seem to get my airport express to extend the guest network from my new airport extreme. It will extend the private network but the guest network doesn't show up in the list under airport utility. Is there anyway to extend the internet only except to one computer which needs to share a printer back to the original extreme?
View 4 Replies
View Related
Apr 19, 2009
I have a Airport Extreme and I would like to extend my network with an airport express but not sure if the airport express is only extending the network if it needs to be plugged into a ethernet if it is only bouncing the network on. Or does it have to have a fixed ethernet wire in it.
View 8 Replies
View Related
Oct 11, 2009
I recently bought an airport express for itunes music and a print server. I have it setup as a client and once in a while i have audio drop out and itunes stops responding. I never have this problem when only playing through the laptop speakers.
the setup is a belking wireless router, nas hardwired to the belkin, ae client and wireless laptop all wireless g.
i thought about using the ae as an extender hoping this proble would go away but do I have to tell the laptop which router it would be hooked to if the se is an extender?
View 2 Replies
View Related
