Mac Pro :: Moving Boot Volume To Another Drive
Apr 13, 2008
I've an early 2008 Mac Pro which I have added a couple of additional SATA drives to; both are Western Digital Raptor drives (a 75GB and a 150GB model). I've successfully used the 75GB as a BootCamp volume for Windows XP, and it is my intention to use the 150GB one as my main OS X boot drive. I used SuperDuper! to copy the original boot drive over to the 150GB Raptor, which copied successfully. Unfortunately, this new volume doesn't appear in the list of bootable volumes in the Startup Disk preference panel. If I restart and hold the Option key down, it is listed and I can boot from it, but I'm worried about erasing the original drive whilst I can't manually select the new drive as my boot volume in the preference panel. For what it's worth, Disk Utility reports the new volume as bootable. Can anybody suggest any remedies as to how to make the new volume appear in the list, so that I can recover the older drive to use for storage?
View 7 Replies
ADVERTISEMENT
Apr 20, 2009
I have two WD 640gigs and the stock WD 500, and I am having trouble deciding on the the optimum configuration. I am open to suggestions. I use my computer for general use as well as for my video editing and graphic design hobbies if that info helps.
I am curious as to the benefits of of the following:
Drive 1 (640)
partition 1: 150gig for OS
partition 2: Bootcamp
remainder: Offline storage
Drive 2 (640)
partition 1: Applications
remainder: music/photos
(scratch disk here?)
Drive 3: (500)
Time machine
Would there be a noticeable benefit to having the applications being separate from the OS boot drive? What if anything else should be split across multiple HDs to increase speed? I've heard of moving the swap file from elsewhere on the forum but I am not sure as to what exactly that is nor the benefits of doing it.
My final question(s) is how exactly I could go by moving my application folder to another drive separate from the OS drive? Just drag and drop? What is this deal with making an alias?
View 6 Replies
View Related
Jul 19, 2008
I purchased a new hard drive, my second Samsung 750 GB. My first one is partitioned, half for OSX half for Vista. Ultimately, I want to have a hard drive per operating system.
At first I thought the way to go for this, based on some stuff I read here on Mac Rumors was to use winclone to clone the windows partition,restore it to the new drive, and then I don't know what.I did the restore, there were errors in the log though..something about the wrong kind of partition. Basically it's become a pain in the ass, and I'm thinking there has to be an easier way.
It occurred to me, I might be able to use "Install and Archive" to move the boot volume to the new disk, moving the user files and network settings with it. If I did this would I be able to expand the windows partition using winclone utilizing the full hard drive? Or could moving the boot volume to the new disk mess up my Windows partition?
View 3 Replies
View Related
Jul 25, 2009
Read the below quote from Mac Performance Guide. Is it a good idea? I know a bit of DOS, so I am used to command line commands but even after after Lloyd Chambers explanation, still not sure what is going to happen? ln -s /Volumes/Master/Mail Library/Mail
The reason I want to move my Mail folder out of the home directory is because I plan to have a SSD as my boot drive and the home directory is on the boot drive, correct? "Moving the Apple Mail folder to your data volume".
This trick lets you move your Mail folder out of your home directory onto your data volume. I've used this technique for years so that I can forget about having to back up my home directory (default location for Apple Mail) and simply back up my one data volume: Master. The same trick can be used for any similarly irritating program that insists on storing its data in your home directory, rather than giving you a choice (a few programs are too brain-dead for this to work). Programs like iTunes let you choose where to put your music; use that option.
Your Apple Mail folder is in the Library folder of your home directory. The trick requires starting Terminal. If that makes you uncomfortable, stop here! You are going to make a symbolic link.
0. Quit Apple Mail, and make a backup of your mail folder.
1. Copy the Mail folder to the top level of your data drive (or elsewhere, then modify step 3 appropriately).
2. Rename the original mail folder to Mail.old as an additional backup.
3. Start a Terminal window and type:
ln -s /Volumes/Master/Mail Library/Mail
This makes a symbolic link to the folder Mail on the volume Master (type the name of your volume, and use quotes around it if the volume name contains a space character). The resulting file Library/Mail is a tiny file that says "look over there on /Volumes/Master/Mail instead". From here on out Apple Mail won't know the difference! Launch Apple Mail and verify that it worked. If you encounter problems, simply copy your backup back into place."
View 11 Replies
View Related
Jun 19, 2012
My Mac Pro will not find it's boot volume. Each time the computer is started, the blinking folder with the question mark is the result. A working install of 10.7 does exist on the machine's primary hard drive. If I were to press the option key on boot, I can select the primary hard drive (after entering the password) and everything boots as normal. I have run TechToolPro on the volume with no detected errors, even after a volume rebuild. A Recovery HD partition is not on the boot volume. Should that matter?
I really really do not want to reinstall Mac OS X. I have hundreds of gigabytes of data in question. Any reinstall/reconfig would take days to complete.
Info:
Mac Pro, Mac OS X (10.7.4), 8GB RAM, 1TB HDD
View 4 Replies
View Related
Oct 24, 2010
I have change my C: drive name (was in past "Untitled"... eww) and it shows up changed as this new volume name on both my Mac and Windows sides. I also changed my Mac side harddrive name and it shows up changed on my Mac and PC sides. So this is all good and correct.
But when I boot up holding option, and am able in choosing which volume to use (Mac side or Windows Partition) the Mac side choice will be named whatever I have named the main drive which is what I expect. But the Windows Partition will just be named "Windows". It will not be named what my C: drive is named (which is what shows up on my Mac side desktop and what I want it to show up as).
This probably all sounds silly and of trivial but it would mean much to me if any one knew a way in changing so that when I choose which drive to use "Windows" will show up as C: "Drivename" would be much appreciated. If this could be a complicating issue I will let you know that the harddrive name for my Windows side contains a ' if that would cause a problem (but my Mac side name does too so it doesn't make much sense to me).
View 4 Replies
View Related
Jun 18, 2012
i have a boot install of windows xp and windows 7 on two separate HD's in my mac pro and i would like to consolidate these (along with my primary mac OS) onto one single drive.
can i migrate these somehow to a new partitioned drive?
Info:
Mac Pro, Mac OS X (10.6.8), 10.6.8 with 64 bit Win7 in Parallel
View 2 Replies
View Related
Nov 15, 2009
read this article here on moving the home folder and it does seem to have some advantages and was wondering if any1 has done this?I have 3 drives currently set up like thisDrive 1: Boot/Applications (and home folder)Drive 2: DataDrive 3: Time MachineI planned on moving the home folder to drive 2, would this be a good idea as far as performance goes? would i have to reinstall anything?
View 1 Replies
View Related
Jun 6, 2009
I have 2 partitions on my MacBook drive. One is OS X Leopard, and the other is a Windows XP Bootcamp Partition (FAT32). When I made the Bootcamp partition, I cloned up my OS X partition to a USB drive (using Carbon Copy Cloner), replaced the OS X partition with the clone (to defragment it), and then partitioned it using Bootcamp. I decided I wanted a larger Windows XP Bootcamp Partition, and so I removed the partition using Bootcamp, recloned and replaced the OS X partition with the recloned backup (to defragment it, once again), and then used Bootcamp again to partition it, this time with a larger partition size. The first time I partitioned it, everything worked great. Ever since the second time, though, when I hold option during startup to change boot volumes, the volume that once said "Macintosh HD" now says "EFI Boot." Also, my OS X partition is no longer the default partition, and when I lookt at the Startup Disk in the System Preferences, my OS X partition is not listed among them. This is the same when I look at the "Startup Disk" preferences on the Windows XP partition, using the Boot Camp application, and when I click "Startup in Mac OS X," I get the error: "Could Not Locate Mac OS X Volume."
I had been ignoring the problem, simply holding option on startup and choosing the "EFI Boot" volume. This was working fine until today, when I finally came around to updating OS X. I ran Software Update, which told me I had to restart my computer. When I did, it went through the whole updating progress bar screen for a while, and then restarted the computer. When the computer restarted, it restarted in Windows XP, so I shut down the computer, booted it up, and held option. I chose "EFI Boot" when I was given the choice, and it started booting to my OS X partition. About a minute or two after I chose "EFI Boot," the computer unexpectedly rebooted into Windows XP again. I restarted the computer, again holding option and choosing "EFI Boot," and again it unexpectedly restarted. How can I get back into my OS X partition? Is there a way I can clone my OS X partition and replace it like I've done in the past? (Note: I have MacDrive 7, and have seen an option for backing up drives on there in the past, but have never used it.) Why is my OS X partition showing up as "EFI Boot"
View 11 Replies
View Related
Aug 28, 2009
For those who have installed the Boot Camp 3.0 drivers does it resolve any of these problems with the 2009 Macbook:Low volume output from speakers, Optical output red light always on, Keyboard backlight won't turn off, Microphone not working, Left speaker louder than right speaker
Other than the ability to access your Mac drive does Boot Camp 3.0 add anything that would make it worth the upgrade?
View 3 Replies
View Related
Jun 27, 2010
Usually when I go to "Restart into Mac OS X" from Boot Camp's system tray icon it works fine, but just recently it has started giving me this error and not working. It seems like usually when this errors hows it's because the Mac volume is bad or missing, but I have a perfectly working HFS+ boot volume that is visible in Windows and boots just fine. I do also have a second HFS+ partition for data, but no problems with them.
View 2 Replies
View Related
Mar 25, 2010
I have a 15" macbook pro. I got it from my college. They gave me a bunch of cds to install stuff, including windows vista, so I tried to install vista and it was giving me problems. Since I have never installed an OS before, I reformatted everything to be NTFS. So now I have a mac with only vista on it. I realized what I did after I tried to use bootcamp and it said could not locate mac os x boot volume.
I have all cds and since I just got this mac, I don't have much saved on here so if I have to delete everything to be able to have OS X and Vista both on here, then so be it. Also I have 2 other computers, both are strictly windows computers if I have to go on a different computer to download something. I am very new to Mac (only have had this for 3 weeks) so I would need to know how to get into any configuration I would need. I know I could call apple support, but I would rather get information over the internet than over the phone.
View 7 Replies
View Related
May 30, 2008
I've been hearing good things about the Spinpoint Drives and the 750GB ones are coming down in price.Here is my current setup1 - 500MB Drive - Leopard2 - 320MB Drive - Vista 643 - 500MB Drive - FAT32 (Shared, Irrelevant)I plan on replacing drives 1 and 2 with 750GB Spinpoint drives.My question is, can I boot off of the Leopard dvd and put in Drive 1 and NewDrive1 and just clone it, and do the same for Drive2 and NewDrive2 and clone it? And then go into Leopard and resize the HFS partition, and go into Vista and resize the NTFS partition?
View 2 Replies
View Related
Dec 1, 2010
This is what I've done so far: I set a Stripped Raid Set with two drives: a Seagate 500GB @7200 and the original WD 640GB @7200. Before setting the Raid, I partitioned the latter in two: a 500GB and a 160GB, so the extra space is not lost. The Raid was created successfully (using the disk utility Raid - no special hardware). So far, is this OK (specially the partition part)? Now, my question is, what's the best way to migrate all my apps and data, from the original single boot drive I've been using until now, to the Raid - so the benefits of the raid are most apparent?
a) As soon as the raid was set, still inside Disk Utility, I used the Restore function, using the original boot volume as source, and the raid volume as target. This is in progress, with an eta of 4 hours, but I can stop it at any time... is this the best way?
b) Another way that occurs to me, is to clone the boot volume to the Raid using Superduper or CCC....?
c) Or perhaps I should make a clean OS install in the Raid volume, and then use migration assistant or other method to bring the apps and data to the raid?Or, something else I haven't thought of...?
View 3 Replies
View Related
Jun 15, 2009
I just set up my new MacBook Pro 13-inch with Boot Camp. Initially I put Windows 7 RC on it, but I couldn't get the audio control function keys to work. Figuring Win 7 is probably quirky, I figured I'd drop back to Vista for now until 7 is officially supported. (Interesting how easy Apple makes it to annihilate a Boot Camp partition. :) So now I have Windows Vista Ultimate SP2 running with no issues. All the Boot Camp drives and utilities seem to be working. However, with all the sounds cranked to max in Windows, and using the F12 key, the volume is very quiet. Probably less than half of what I can get in OS X.
View 24 Replies
View Related
May 4, 2012
IMac with 10.7.3 and Seagate GoHlex 2TB external drive. Using the disk utility why is was not backing up.The Seagate is now asking the question "Updating boot support partitions for the volume as required". The verify disk permissions and repair disk permissions buttons are not active. My reference "The missing manual" does not cover this challenge.
Info:
iMac, Mac OS X (10.7.3)
View 14 Replies
View Related
Apr 29, 2012
My Time Machine drive is failing according to Disk Utility. It's trying to fix it but is now stuck on: "Updating boot support partitions for the volume as required." It's been there for hours. How long should I wait before assuming that it's just hung and force quit Disk Utility / re-boot (possibly making the problem worse)? One answer I saw was "as long as it takes" but realistically, I surely can't just leave it running for weeks. There must be a maximum time before I should assume it's not going to work.
Info:
MacBook
Pro, Mac OS X (10.7.3)
View 5 Replies
View Related
May 23, 2009
well where do i begin ?? basicly i purchased a ibook g4 14" 1.33ghz that had its harddrive upgraded by a apple service provider. About two weeks after this upgrade took place the harddrive started playing up and the machine would not see the boot volume on the drive when restarted or every now and then the machine would freeze after some time of use, a few hours maybe. i ran apple hardware test and it came back clean after zapping the pram and disk warrioring the drive it fixed this for a day then it started again oh well.
so i sent it back to the service provider who said yep its the hadrdrive goody !!! oh NO he calls back the next day and says the new harddrive is not reconized and that they tried a new ribbon cable WTF when i sent it in the machine saw the harddrive via target disk mode all the time it just didnt see the boot volume.
NOW his saying its the logicboard **** sake !!! so my question could this machines logicboard be fried when it was fine before i sent it in , i mean the ide controller was fine i checked it and now im faced with a brick !!!what do i do ????
View 24 Replies
View Related
Mar 23, 2008
I want to install a 7200.11 1TB drive and move my OS,bootcamp partition etc.. to the new 1TB drive. Is there a way to do this on the macs without having to reinstall everything?
View 3 Replies
View Related
Jan 10, 2008
Had a drive fail in the osx server box, the other mirror is still running but who knows for how long. I've purchased a external drive and want to install X to it and use that as the boot and storage volume. Is there a best practices way of migrating to the new drive? I can install X, but then how do you move and retain data/rights? Is there a way to just "copy" for lack of a better term the entire volume to the new one? I've used ghost on a windows machine, not done anything like that on a mac before.
View 1 Replies
View Related
Nov 16, 2008
In trying to move my Iphoto or Itunes files to an external drive, I get the following error message: "The items cannot be moved because "External Data" cannot be modified". Can anyone explain what is going on and why it won't allow me to move these files?
View 12 Replies
View Related
Jan 31, 2010
My original white Macbook just died after 3.5 years. It turns on in the sense that the white light works but there is no actual startup. I took it to the Apple store and they told me the logic board would need to be replaced. The computer itself is pretty beat up so I figure it's time for a new one. I plan on buying a Macbook Pro this week. How can I get files off of my old MacBook? The logic board is dead so I can't really do much. Any advice? Thank You. Also, there is no way I want to pay Apple $100 for their One-to-One transfer program.
View 6 Replies
View Related
Jun 25, 2010
I was hoping someone could help me with this, what I have is a newer mac mini connected to a netgear wndr3700 router via ethernet port, and a W/D 1TB my book for mac external hd connected to the router by usb. I can access the hard drive no problems, but it will not let me move files to it. I'm logged in to the mac as an administrator, and into the router as administrator. it asks for password to move files, i enter it and it comes up with the message i've attached.
View 1 Replies
View Related
Jul 15, 2010
I just got a new hard drive in my mac pro and i am attempting to move the files over to it so i can delete the old drive and reinstall new OS onto it?
I have looked for the solution but i can not seem to find anything. I can't drag and drop because after a while an error happens and the whole process stops and i can't seem to find out why that is happening.
View 6 Replies
View Related
Dec 8, 2014
My old mac died do to Motherboard Failure. I want to move my iTunes from that hard drive to my new Mac. I have the drive in an external housing I just need the how to on moving the iTunes library and combining it with the new iTunes.
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1), i7, 16MB Ram
View 1 Replies
View Related
Feb 1, 2012
If I have iTunes on an SSD drive (the boot drive in my Mac Mini), can it read the music library on a second rotational hard drive? I'd like not to have the large music library on a 120GB SSD drive.
View 3 Replies
View Related
Dec 20, 2007
This is bad and old, and full of lessons about backing up. Anyway, internal boot drive crashed a week ago, and internal optical drive is busted. New external LaCie dvd burner works fine, but all attempts to start up from Tiger, Leopard and Diskwarrior installation disks just end up back in OS10.3 on my external LaCie FW drive. I've tried many things: unplugged everything; switched external LaCie to USB (wouldn't boot), unplugged power from internal optical drive so Mac wouldn't look there first (somebody suggested that). Attempts to start up installers from mounted DVDs result in installer screen with restart button, which, when clicked on, results in... you guessed it... boot back to dreaded 10.3 system. Night owls and westcoasters, I am up for hours yet, pulling hair.
Information:
G5 Dual 2GHz
Mac OS X (10.4.3)
View 4 Replies
View Related
Apr 27, 2012
Last week I finally upgraded from 10.6 to 10.7, but now my Mac Pro (2008) won't boot properly. It'll start to boot with the gray screen and the Apple logo, but then the entire screen goes gray and it just locks up there. However, if I reboot and hold down the Option key to bring up the list of bootable drives that works fine. I've checked my Startup Drive settings and the proper drive is selected. why it won't boot on it's own anymore? Holding down the Option key is getting old.
Info:
Mac Pro - Octo Core, Mac OS X (10.5.6)
View 5 Replies
View Related
Nov 11, 2010
I can't find a thread that addresses my particular problem, so I'm hoping somebody out there can point me in the right direction. I have a 100gb iTunes folder on my MacBook which I wish to transfer to my new iMac. Rather than simply copy it across to the iMac's HD, I would rather copy it to an external HD and then run iTunes from the external HD connected to my iMac. So my question is simply what is the best way to do this.
Also, can anyone recommend a great external HD which won't expire after 6 months?
View 2 Replies
View Related
Dec 24, 2010
I recently swapped the 500Gb WD drive out of my Macbook Pro for a 500Gb Seagate Momentus XT drive. OSX transferred across without any trouble, but despite using WinClone to backup the Bootcamp partition (running Windows 7 64-bit) I haven't been able to restore it successfully. What happens is that it appears to restore, and I get the dual boot screen when I hold down the Alt key, but on selecting Windows I end up getting a screen saying that some component or other is missing. I might choose simply to use Windows 7 under Parallels on this machine if I am faced with a full restore, since that way I can more easily backup the Windows side, and since it's running (MUCH) better since swapping drives. However, IDEALLY I'd prefer to restore my existing partition...
View 2 Replies
View Related
