Well I finally got the drivers off of the MBA install DVD (URL). Just dumped them on to a USB stick. I installed XP Pro again using bootcamp assistant without a hitch. Rebooted into XP, put the USB stick in and ran the setup.exe off of it. XP blue screened when installing Broadcam drivers it appears.
View 10 RepliesSo, whilst it was installing bootcamp 3.1 it blue screens and now when it boots and complains about pci.sys.
View 2 Replies View RelatedI Have my 15" macbook pro 2,4 Ghz 2G in RAM, with Snow Leopard, bootcamp and vista running for some time (about a year or so) and every thing has been going ok. Last night I made a clean windows 7 installation. All went good, installation, let windows 7 make his updates, I put Snow Leopard disk to make macbook pro drivers updates and I installed all the program I need including Norton 2010 Antivirus.
All went smooth and easy untill I activated Windows 7 with Daz Windows Loader 1.6.9. After a few seconds It said : Everything Ok, Windows is now activated and your machine will reboot now. After that, it gets out of the desktop to the closing window and suddenly I get the blue death screen. I have to manually press de power button to shut down my macbook pro.
I reboot again and after getting the safe mode screen stuff i just keep with Start Windows normally. It starts well again, but now each time I want to reboot or shut down my MBP I get again and again the blue death screen. And I�m sure i will get it while working soon.Is it probably because I did all kind of updates before running the Daz Loader (including programs and antivirus software)??
I keep getting the following error 3 quarters of the way:
STOP: C000021A "Fatal system error. The windows subsystem process terminated un expectedly w/ a status of OX C000005. System shut down. It's a blue screen with white letter.
I'm using Office XP Service Pack 2 with imac OSX Install DVD version 10.6.3.
The steps I'm taking are:
Log onto my mac and use pre installed bootcamp to partition the drive. I'm using 32GB of space. Then I use my xp Prof w/ service pack 2 cd to install xp. At this time everything is working fine except for the missing drives. Then I put the bootcamp cd that came with my imac into the iMac and run bootcamp. It looks like everything is working perfectly. The imac is finding wireless internet and all the drives look like they are working fine until out of no where a blue screen pops up and states what I wrote below. There is nothing else on the screen. I'm using a 27 inch imac that i bought about 5 weeks ago new.
I emptied my cache on Safari and my computer stayed frozen for a few minutes. I decided to re-boot, but every time I do so, it goes from the gray Apple screen to a blue screen and stops right there. I don't get the spinning wheel, but rather the black arrow that I can move about the blue screen, but nothing else.
Here's what I've tried with no success.
1. Re-booting via Safe Mode (Command-Shift). Instead of freezing on the blue screen, it asks for my password and after a few seconds it stops on the Snow Leopard Pink/Black Stars background. Same result, only the background is different
2. Resetting PRAM - No luck
3. Re-booting with the Snow Leopard DVD and using Disk Utility. I follow the necessary steps online. No luck
My MacBook air won't reboot...just has blue screen with apple and circle. Someone said control R which I did then it offered me options. try the other options as I have all of my work on this computer and am afraid of loosing it.
Info:
MacBook Air, OS X Mavericks (10.9.4)
im having trouble installing bootcamp and drivers on vista for my macbook. i installed vista without problems but when i put my leopard disc in it doesnt not run the bootcamp installer instead it goes into a macbook air installer and asks for me to connect to a macbook air. what is wrong? i have done it before so i dont know why i cant do it now. should i do everything all over again?
View 2 Replies View RelatedSo i'm at work installing Vista via bootcamp on my newer Macbook Pro and I don't have my OSX disk. Where else can I get the drivers?
View 2 Replies View RelatedOne minute my computer was fine, the next it froze. I did a hard reboot and now it won't boot past the blue screen, but I can move my mouse. Any idea what to do?
View 8 Replies View RelatedI was on the computer when it froze on me then the lines popped up and the computer asked me to restart. When I did that, it just freezes on the start up screen now with the lines across it and will do nothing else.
Info:
MacBook Pro (15-inch Early 2008)
I was using my Mac (Macbook Pro 15" screen) and tried opening a file in GarageBand, at which point a warning message came up saying something about a midi file and something not being allowed, and then froze, resulting in me having to switch the computer off from the power button and restarting (Sadly I didnt realise that this would be the start of a whole host of problems and didnt make a note of the warning message). After rebooting I got the 'stuck on the blue screen with the Apple logo and infinitly spinning wheel' problem that i've seen in a few posts. having tried numerous suggestions posted with no change I ended up taking it to the genius section of an Apple store. When i got it back they said that it may have been a corrupted file, and that they re-installed and reset the starting programs (Something along those lines, I cant quite remember). I can now get onto the computer and use it, though some new problems have arisen.......
View 1 Replies View Relatedrealised that my previous post was in the wrong section, (sorry!) so i decided to re-post it in the correct place.
Ok, so i setup bootcamp and installed windows xp. installed the bootcamp drivers, and things worked fine for a couple of days.... than the bootcamp appeared to get corrupted. fn keys cant work, xp cant detect mac partition (cant access any files in there, though the reverse works), no bootcamp icon in system try. someone mentioned to search for the KbdMgr.exe or bootcamp and start the program, but i cant find both items.
re-installation of bootcamp with the cd doesnt seem to work for me. either the system restarts before installation is completed, or xp crashes during the installation process. EDIT: now all i get is xp crashing before installation is complete
downloaded the bootcamp 2.1 but absolutely nothing happens when i click on the exe file!
there are a bunch of apple drivers shown in the add/remove programs, but they dont seem to be working (tried to remove them all and re-install, but xp crashed halfway and i had to use the cd to repair it). seems to me all that the drivers are 'there' already, but not working.
short of completely starting over from scratch and re-installing the entire windows, is there anything else i can try?
I just got everything brand new again: a Macbook and Windows XP SP3 integrated CD.
I installed Windows and I am now struggling to install the bootcamp drivers.
I run the 2.1 installer and nothing happens at all. nada, no error messages etc.
I presume that this is some problem with SP3, but I have SP3 integrated so I can't install SP2 , install bootcamp and then install SP3, unfortunately..
I've tried three times to install Bootcamp drivers on my Windows 7 partition and all times have failed with a mini BSOD that says "A problem has been detected and windows has been shut down to prevent damage to your computer" a couple seconds after it's done installing the ATI drivers and it's just a green bar with no text above it. I couldn't read the rest of the BSOD because it goes away in 2 seconds. Any help/fix for this would be appreciated. I'm thinking of just reinstalling the 2.0 drivers but I really want access to my Mac side while in Windows.
View 2 Replies View RelatedMy parents bought my younger sister a new MacBook a couple of days ago. She wanted me to install Windows on it so that she could play some games that she has.
So, I ran Boot Camp assisstant and installed Windows XP. XP itself runs fine. However, when I put in the disc from her MacBook that installs the Boot Camp drivers it gets to about Cirrus Audio (or something) and then crashes to blue screen. I tried installing the drivers a couple of times and then tried to reinstall XP and try again.
I've bought and installed into my computer the NVidia GeForce GTX 285 1GB for Mac, it's a great card, I'm on Windows 7 at the moment, if I install the WHQL 186 drivers, will it affect anything on the Mac side? does it manipulate the card or do anything that would make it windows only or damage it etc..?
This is the link: [URL]
I just finished with the installation of windows XP SP2 on my MacBook Air, it all went fine.. but at the moment when I inserted my Leopard disk in order to install the drivers, the screen turned blue and the computer rebooted by itself in a matter of seconds. I've tried 3 times by now and keep doing the same.
View 6 Replies View RelatedI just installed Windows XP SP2 on my iMac and when I tried installing the Boot Camp disk my computer crashes in a blue screen then immediately restarts.
View 5 Replies View Relatedso i just installed bootcamp windows 7 ultimate 7600 x86 retail on 100gb partition and for some reason when i try to install the bootcamp drivers off the install OSX cd it brings up a installer assistant for remote macOSX install and macbook air cd/dvd sharing (it looks like as if its recognizing my mbp as a mba). so that didnt work. im trying to install boot camp update 2.1 for windows vista 32 bit and thats not opening up to install....the only things ive installed so far are the nvidia 9M series drivers.
View 2 Replies View RelatedImac has all the updates before I partitioned with bootcamp (52 GB) I inserted a Win 7 Pro 32 bit disc (OEM from newegg). It installed windows and auto rebooted, windows came up and auto booted again. All I got was a black screen, I think it just turned off. I tried powering the machine on and booted to windows, but a message asking if I wanted to boot normally or go into safe mode. Does anyone have an idea why I can't get past this step?
View 2 Replies View RelatedImac has all the updates before I partitioned with bootcamp (52 GB) I inserted a Win 7 Pro 32 bit disc (OEM from newegg). It installed windows and auto rebooted, windows came up and auto booted again. All I got was a black screen, I think it just turned off. I tried powering the machine on and booted to windows, but a message asking if I wanted to boot normally or go into safe mode. Does anyone have an idea why I can't get past this step?
View 1 Replies View RelatedSo, I was on windows, using bootcamp, and I was creating partitions on a pen drive with it, and then it asks me that it needs to restart to apply changes.
But then, while restarting, a blue screen occurred (**** windows).... And I forced the shutdown pressing the power key.
Then, I simply turned the MacBook on, trying to boot on my snow leopard and I got a flashing folder with a question mark on it. Now I can't access any partitions on it, if I press option key on startup I get a blank window!
I tried to reset PRAM, repair the MacOs partition using the snow leopard DVD (it shows up fine, along with windows partition and EFI partition), and I still don't get my startup disk showing up...
Info:
MacBook Pro, Mac OS X (10.6.8), Snow Leopard with windows7 bootcamp
I have a Macbook plastic, 2.4 GHz intel core 2 Duo with 2 GB of ram.My Mac is currently running on OS X, i used to have a 40 gig partition Windows XP, a couple of friends of mine where talking about how much they liked Windows 7 and finally i had had enough blue screens to say, sure ill switch, why not?... assuming it would not take longer then lets say a day at most, i set off on my quest.
FWI, im running an older model Macbook that was bought refurbished (not sure if that has anything to do with my problem). anyway i removed my previous partition, then using Boot Camp Assistant i repartitioned a 40 gig section for Windows 7. Then ran the installer. I have a copy of Windows 7 ultimate 86x. The Windows boot screen turned up, i had to reformat the partition so that i could install, no problems there. after all said and done the installation worked perfectly, up to a point... First problem that appeared was the lack of sound. i fixed that by downloading Realtek's High Def sound drivers.
Then it was the rest of the drivers for the macbook. heres where i run into my problem, i have the Mac OSX install discs 1 and 2. inserting the first disc the option of the auto run of the setup popped up i clicked run. and instead of the same old install drivers option all i have is the option to install the software that lets macbook airs share cd/dvd drives... needless to say i got frustrated and to put it lightly pissed off...
unsure of wtf was going on i looked it up online and really couldnt find anyone with the same problem, i found a web page saying that i should have the windows auto update itself and that should fix the problem. it did not. i dont know what the hell is going on. and im about this close to reinstalling windows xp and telling windows 7 to go **** itself...
I recently installed the 64 bit Windows 7 Ultimate operating system onto my MacBook Pro 13 inch. I have the most basic Macbook Pro 13 inch with nothing fancy added. Whenever I load up the Windows 7 OS on my Macbook, it never utilizes or even realizes that I have the NVIDIA graphics card in my laptop. It instead believes I have some integrated graphics card that cannot even run the most basic of PC games. I know my laptop can run these games because on OSX it runs multiple games with higher requirements than these games I am trying to run on Windows.
Basic question: How do I get bootcamp or whatever else to make Windows 7 realize I have a NVIDIA card and drivers. Sorry if I am coming off as stupid or confusing.
I have a macbook intel(black) it originally came with tiger, i installed leopard on it a while ago. How ever i dont like leopard i want tiger back. I lost the original grey cds that came with my macbook so i hooked it up to my imac with target disk mode. I erased the disk using disk utility. Then i installed tiger with an original copy of tiger bought in a mac store. My imac rebooted i follow the installation menu and it installed. the internal drive of my macbook booted on my imac asif it were an external drive.
I rebooted into the internal drive of the imac and ejected the macbook drive. I disconnected the firewire cable and rebooted my macbook. The problem is that it wont boot properly it just goes to the white screen make the startup sound and starts flashing a folder with a questionmark in it. ive tried resetting the pram etc but it doesnt seem to work. i tried holding alt at boot up all i get is the cursor and nothing happens. i can still connect it to my imac but that it. how can i get my macbook to reboot properly again?"
I have a new IMac and I installed vista via bootcamp, when I start up vista I am getting a blue error screen that flashes so fast i cant even ready it... then the computer shuts down. When I restart it again it goes to the page that gives me the choice to safe start or start normal. Sometimes it will let me go to windows and work fine but there have been times when it just does that over and over again. Does anyone know what this is caused from? I guess I'll have to reformat or something. If I continue to use my computer this way will it wreck something?
View 12 Replies View RelatedI just installed an update on my macbook, but once it completed, it got stuck at the blue loading screen with the swirling thing for more than 10 minutes (I started to pay attention when I noticed it hadn't booted up faster, so I'm not exactly sure how long it took). It eventually restarted itself though. It's happened once before, but I did what I use to do on my old windows laptop and just held down the power button until it powered off, let it sit for a little bit, and then booted it back up. It worked just fine.
My question is, is anyone else having this problem and is there a fix? Is this something I need to be worried about? Did I somehow mess something up by powering it down and back up before? Forgot to mention what macbook pro it is (if it matters). 15in MBP, OS X 10.6.4, 2.4GHz Intel core i5, 4G RAM...
I've got a 2010 i7 15.4 MBP, after installing boot camp drivers from MAC OS DVD, I could not find any option about how long to dim screen brightness. However, my friend's 13.3 MBP does have. What about yours, guys?
View 4 Replies View RelatedOS: Snow Leopard Bootcamp Win 7, Ubuntu 9.10.Problem: I felt I would be nice to the iMac and shut it down after a hard days work. I woke up the next morning, turned it on, and it loads up past the gray screen, then goes to the dark blue snow leopard screen. From there I DO NOT get a mouse pointer. I get zip, zilch, nothing.I have let it sit over night just to make sure it wouldn't surprise me. Remedies tried:Booting to safe mode. Boots fine but when it gets to the blue screen it doesn't do anything else.Booting to single user mode. From there I renamed the com.apple.loginwindow and the com.apple.startup file. Didn't do anything.Resetting PRAM, VRAM, ram, jingle bell, any key, * key, I've tried resetting everything possible and not possible. WHY computer gods? WHY?
View 6 Replies View RelatedI have just got an old 2004 G5 and thrown a brand new hard drive in it. When i tried to install leopard (which I'm told would be the best operating system to use) it comes up with a blank blue screen!
View 14 Replies View Related