I am trying to run bootcamp and install vista on my mac, but I keep getting error messages telling me that I can't move file's. I have tried making the partition smaller and it still doesn't work.
View 5 Replies
I am planning on a getting my MPB (15") very soon and having been a windows user all along, I have a couple of questions about putting windows on my new MPB.
-Win7 Upgrade: I currently own a valid copy of XP and a Windows 7 Ultimate upgrade disc. Is it possible to install the XP, then upgrade to Win7 on my MBP? If so, are there any guides/tricks I should know of before attempting?
-Timing: Can I install the windows after I've played around in OS X and installed/saved a couple of things there? Will installing windows wipe out my stuff in OS X or is it completely unrelated? My concern here is that I will be getting my MPB before I can get my copy of windows back, and during that time I need to do some work.
-Partitioning amount: this kind of ties into the previous question. How much should I partition (% wise) for the windows, and when should I do it?
I was trying to setup a partition via bootcamp to install windows 7 and I got the error msg that is grey and all different languages that says to shut down. I was so scared I would loose my data b/c I haven't back up in like 6 months.
View 1 Replies View RelatedToday I decided install Win7 on my MBP and while partitioning the HDD using bootcamp I encountered the following error. Consequently, I used the Disk Utility in order to partition the drive. However it too failed (even for smaller sizes). How do I go about partitioning the hard drive? Erase everything and restore from backup?
View 6 Replies View RelatedI'm trying to get Windows 7 on my mac and when I go to bootcamp and do a partition I get, The disk cannot be partitioned because some files cannot be moved. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again. My disk is not partitioned and it's formatted correctly so i searched and saw that my HDD is like untidy or whatever it is called and it needs defragged. So i get iDeFrag full version and I do not know how to work it. Then I read I should back up a clone of my HDD and then copy it back to my mac, but i have no external hard drive.
View 4 Replies View RelatedWhen I try to run boot camp I'm getting a can't move files error, as seen below. I do run Time Machine all the time, does this mean if I re format my HD I can just get all my data, every little bit, using time machine?
View 14 Replies View RelatedI have tried to install windows on my mac and bootcamp says files can't be moved, I haven't got a problem with reinstalling my mac provided someone can tell me if it's possible using a backup from time machine and the process needed please. I've no idea whether it will work and I want to be 99.99999% sure before I do anything as I have important work on my mac which I can't afford to loose.
View 5 Replies View RelatedWhen partitioning so that I can install XP, bootcamp claims that specific files cannot be moved, making it so that I am unable to install XP. It then orders me to ~gasp~ back my files, and reinstall OSX. Anyone else have this error message? I wanted a 14GB partition, and that would leave about 16 additional gigs free on the OSX partition
View 24 Replies View RelatedI've been trying for days to get bootcamp to work on my 2010 MBP and it freezes every time. When I say freezes I mean, it locks up my entire computer to the point where my only option is to do a hard restart with the power button. Is there any way to get it to partition my hard drive or use another program to do it?
View 9 Replies View Relatednow I lost 5 gb's of space...
because the process never completely finished, a drive does not show up on my desktop...
I've tried everything I know... does anyone know how I can regain my lost hd space?
I tried to use Bootcamp to install Windows XP Professional. When trying to partition through bootcamp I got this error:
"The disk cannot be partitioned because some files cannot be moved. Backup the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) Volume. Restore your info to the disk and try using bootcamp assistant again."
I tried to create a journaled partition after using the disk utility to fix any problems which it found none. The problem was that the partitioning never stopped it went on for hours till I finally canceled it. I also have a problem with VMware Fusion which you can find here: [URL]
Here's the problem. I'm trying to install Windows 7 Ultimate through bootcamp and the problem is, that when it restarts to boot and install from DVD, the screen goes black with the tickling white underscore and it won't load.
every time I start OSX, a box appears saying that the latest firmware for the EFI 1.4 or something has been successfully updated. Could it be related or is it something else?
Specs:
MacBook 5.1 , 2.4Ghz 13'
2Gb RAM DDR3
NVIDIA GeForce 9400M 256MB
I recently installed a partition to my mac mini using BootCamp, but leaving the Windows installation til a later date as I'd left the authentication info in the studio! On booting up my mac the next day I'm greeted with a flashing missing OS symbol instead of the apple logo. I've tried resetting the mac or trying to force it to start a network startup up but to no avail.
I attempted to run from the installation disc but it isn't responding to holding don 'c' to run from the disc. However I'm running 10.5, but that was an upgrade from a colleagues disc and the only installation disc I have is 10.4. I can get that disc but may take time! The only interactivity I can get from the keyboard is upon pressing 'option' I'm asked to enter a password, but I don't know what password it's after?
Anyone else noticed this? Compared to 10.4.x and previous gen mbp, I remember the partitioning via bootcamp used to take no longer than 45 sec to a minute. Now it takes something like 3-5 minutes to complete!
View 1 Replies View RelatedI purchased a new MacBook 13" laptop over the summer and it has OSX 10.5. Can I use the disks that came with this to install OSX 10.5 on an older G5 tower?
I'm interested in converting the G5 to a gaming computer and partitioning with bootcamp so that I may play PC games.
I have a Mac Mini and I am running Snow Leopard and BootCamp 3.0. I am trying to install Windows XP. I'm using BootCamp to partition the disk. I've tried with different sizes, the outcome was the same. After partitioning I can see the Bootcamp volume in Finder and on the desktop. Bootcamp then tells that I can start the installation. The Windows XP CD is in the drive. Restart follows. And then nothing but the gray screen. No installation starts. I have to shut down the computer and start it again.
This time I hold the option key and there is only the Mac OS volume! There is no sign from the BootCamp volume. After starting the computer again it doesn't boot from the Mac OS volume, there is the gray screen only, which means that the startup disk have been changed and that usually happens when you install windows with bootcamp - it changes the startup volume from Mac OS to the BootCamp volume, but still the BootCamp volume is not there. I've installed Windows XP with BootCamp several times. I know how it works. Installation starts automatically after the restart.
I was partitioning my Disk using BootCamp while trying to install Windows 7 on my MacBook (30GB partition) but my partitioning never ended. The stupid BootCamp got stuck so after one hour I had to turn off my MacBook. I even listened if the HD was working but nothing... The shut down was inevitable.
So I turned on my MacBook again and all seemed fine. That was until I checked my HD capacity! My HD was 30GB less than what I should normally have. Instead of 60GB FREE space I know had 30GB. So I thought that ok, BootCamp must have managed to make the partition even if the MacBook crashed and burned.
No, it hadn't. My 30GB have vanished! I also went to disk utility and used Partition to see if there was any space there but nothing. Disk Utility see my HD as a 250GB disk which is correct. Somehow that 30GB has been recognized as a big chunk of info on my HD so now I am missing 30GB.
It all started off when I installed windows 7 on my mac via bootcamp. It worked, but somehow Leopard didn't recognize the windows partition, and that all ended up in even more trouble, so I ended up reinstalling Leopard, thereby erasing everything on my hard drive.I have now reinstalled leopard, but somehow, Disk Utility can not start, everytime I open it, it says it had stopped working and that I can send an error report. Damn! I just need Disk Utility to recover my drive, so that bootcamp can make the partition, but it doesn't work!
View 3 Replies View RelatedI have been having awesome experience using OS X and Xp at the same time! But lately when I try to run the games on VMware... its starting to lack in graphics and memory. So, I was thinking of installing bootcamp. My first question is will I have stuff that I have installed in VMware Xp in Xp installed on Bootcamp? Secondly, if bootcamp is partitioning the HD then is that mean when I want to reinstall the OS X and wipe the HD will I only have the part that had OS X? Sorry I am pretty new to Mac and I never was brave enough to install xp on Bootcamp xD.
View 6 Replies View RelatedThe title say it all, I've tried with my vista disc in the drive and out of the drive, given it a few goes for 10-20 minutes (recommended by people online) and then an hour just incase.
View 1 Replies View RelatedI'm trying to install Windows on my brand new MBP using Bootcamp and I am hung up on a "No Bootable Device" error prior to installing Windows and after successful partitioning. I have updated everything I can think to update. The disk is a retail Windows XP with SP2. I have even tried reseating the battery. I can get back to OSX but would still like to install Windows rather than give up.
View 14 Replies View RelatedI know this question has probably been answered somewhere, but I can't seem to find anything quite like my situation.
I'm resizing the Windows partition on a 2.2GHz 15" Macbook Pro. I deleted the partition using Boot Camp, but when I went back to repartition it, I get the error that states:
"The disk cannot be partitioned because some files cannot be moved. - Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume ..."
However, according to Disk Utility, there's only one partition on the drive, and it's correctly formatted. I'm not missing any hard drive space or anything. Is there any way to fix this without going through the hassle of reformatting my hard drive?
I'm trying to install XP on my Macbook pro with bootcamp. I just replaced my 160gb hard drive by cloning it to a new 640gb hard drive (I zeroed all data and formatted to mac os extended (journaled) beforehand).I wanted to make a 50gb partition for windows and I currently have 515gb free. I don't see how there's any fragmentation that could be stopping it since the cloning process should of defragged... Just to be safe though, I used idefrag and partitioning still fails.
View 2 Replies View RelatedI moved the files from my external hard drive from the back up files made by Time Machine into the trash, as I've always done. This time I get an error message (error code 8003) and am not allowed to move the files back onto the drive or out of the trash, even after changing the permissions. I've searched the support forum for error code 8003, but find nothing that relates to back up files.
View 5 Replies View RelatedI recently added a G-Speed Q RAID array to my MAC PRO to use exclusively for back-up with Time Machine.It worked great.I then decided to also share the external device over hardwire lan with my wife's iMAC so whe could back-up with Time MAchine as well.I then started reading posts that suggested the two Time Machine instances would compete for space on the back-up array and eventually it would fill up a I'd have problems. The solution, everyone said, was to partition the external drive and assign one to each Time Machine back-up.I did this and everything seemed to be working great until the remote client tried to run back-up.
It fails with the "Disk does not support AFP features" error message.Current status, local machine back-up works fine. Remote machine cand find the drive and connect once I provide correct user name and password, but fails once back-up begins.Both machines are running Lion 10.7.4.
Info:
Mac OS X (10.7.4)
I got the Mac error code -36 while trying to move a backup file (made by Time Machine) to another drive. The full text of the error message is: The Finder can’t complete the operation because some data in “boot.efi” can’t be read or written. (Error code -36)
Info:
MacBook
Pro, Mac OS X (10.7.4)
I have used bootcamp to partition my disk and install windows vista onto my uMB. Now I want to partition the disk again to create a tri boot setup where I can either install ubuntu or the dev preview of snow leopard (I haven't decided yet). Can I just do this with disk utility and shrink my OS X partition in order to create a new partition or will this cause problems with the disk? I would really like to not do a fresh install of OS X because I have had to do this twice to fix disk problems relating to bootcamp.
View 12 Replies View RelatedGetting a 10GB Minimum error when trying to do a windows partition, have 20GB free on my 64GB SSD.
View 4 Replies View RelatedI have recently downloaded a copy of Windows 7 on my macbook pro in attempt to bootcamp it so i can play more games. everything went well until it booted to windows installation. from there i clicked start installation and it gave me two choices either to Update it or Customise it. I first chose Update but it didnt work. I then tried customise, and found out that my partition wasnt in NTSC(or whatever) format. So i stop my attempt to install it and tried to go back to mac. I could not go back to mac. i dont know how. I'm stuck there with the installation disc in the drive. I cant go forward with the installation and i cant go back. I finally figured how to get the disc out, and i thought that if i install the Mac OS X again it would fix things so i insert a Leopard installation disc. I was Completly wrong, and now i am stuck at a black screen telling me to insert an installation disc with the Leopard disc in side. I cant do anything now .
I need help please, any valid solution will be appriciated.
THanks in advance
I did not have enough memory and I had already deleted some games in the past to do updates. Well I downloaded Windows XP Home about half a year ago and decided I really did not use it all that much. When I downloaded It i cut the memory in half (1/2 OS X and 1/2 Windows XP) So I went back to my Bootcamp installation papers to see how to properly uninstall Windows. So I did and everything seemed fine the only thing I thought was odd is that it only took like 3 seconds to uninstall so i knew it did not actually uninstall. I did not think much of it cause I could now download the update.
View 15 Replies View Related
