i'm worried, i just repaired my hard drive with diskwarrior yesterday, because the directory graph was a mess. after the rebuild there were still a few spots on the graph that were out of place. now when i'm computing i have moments where everything freezes for less than a second including my itunes music that is playing. its happening ever 5 minutes or so.
mac pro 2 x 3ghz quad core
with 4 gigs or ram
my audio card is a mbox
I have a Mac Pro (early 2009) 4,1. I run Windows Bootcamp using a GTX 570 SC and I can only boot into Windows because of my graphic card. I would like to boot into OS X momentarily and I have an old GPU from Powermac G5. It is the 9600XT. Would it be a problem to plug in the 9600XT as a helper card to get me into OS X briefly?
Info:
Mac Pro 2009, Mac OS X (10.5.6)
My iMac has recently begun freezing momentarily. First it will freeze for a few seconds (while still allowing the mouse to move). It will resume, and then a minute or so later it will freeze again for a slightly longer duration. During this time, I can move the mouse, click on things, but nothing responds. Music and videos pause and then resume, websites stop loading, not able to type, etc. In fact, it just happened while typing that last sentence.
Here is my Etre: EtreCheck version: 1.9.15 (52)Report generated September 7, 2014 at 10:17:19 AM CDT Hardware Information: ? iMac (27-inch, Mid 2011) (Verified) iMac - model: iMac12,2 1 2.7 GHz Intel Core i5 CPU: 4 cores 12 GB RAM Video Information: ? AMD Radeon HD 6770M - VRAM: 512 MB iMac 2560 x 1440 System Software: ? OS X 10.9.4 (13E28) - Uptime: 5 days 18:36:51 Disk Information: ? ST31000528AS disk0 : (1 TB) S.M.A.R.T. Status:
[code]...
Info:
iMac (27-inch Mid 2011), OS X Mavericks (10.9.4)
I am running a clean install OS X, including my third-party applications, and this five-year-old machine has never run better. However, an anomaly has arisen. Whenever I push play (iTunes) my desktop picture disappears briefly, replaced by a neutral gray screen, before reappearing. As I write this, I quit and re-launched iTunes and the problem still exists. I am loathe to restart my computer as I am in the middle of some pressing business. I will check back if a restart resolves this issue, otherwise, feel free to comment.
With iTunes running, pushing Play starts the song and one-second later my desktop picture disappears briefly. Pushing the button (Pause) again stops the song but nothing else happens. I am currently listening to iTunes DJ and just now the O'Jays started playing and without my doing anything, the desktop picture disappeared and reappeared. I have iShowUHD and will make a recording of it, if it continues.
Info:
24-inch iMac 2.8GHz (early 2007), Mac OS X (10.7.4)
Ok, I had this problem for quite a while but lived with it, now it's becoming a real issue. Any time I click on a "download" (using Safari) button or the like, nothing happens. The page momentarily loads but that is all. This is on ALL websites that have any download links, except Rapidshare, which still seams to work for me. Any time I had to download something that wasn't on rapidshare I used my download manager (JDownloader) to download it, which doesn't encounter this problem. But a lot of sites aren't supported by JDownloader so I'm bummed
I've tried running hardware and system scans on my comp, with no results. My internet test shows nothing wrong, my internet speed is quite good actually (20 Mbs/sec download, 5 Mbs/sec upload). I've reseted Safari/airport extreme and router numerous times without effect. I would try a different internet browser but I can't download it
I have a PowerMac Dual G4 @ 500mhz that has issue with waking up from sleep. Running Tiger 10.4.11 with a fresh install of it on there. 512mb memory populating all 4 slots. I've verified permission, verified the HDD via disk utility. I've also run MacOSXmemtest that I purchased and that came up clean. I've also reset the PMU. When I wake the computer up from sleep it will usually wake up to a display and then the mouse and keyboard work momentarily (USB MS keyboard and Logitech Mouse) and then I'll get the beachball of death. The mouse and keyboard will then stop responding completely. I have to manually restart the computer but it seems to work great if it doesn't go into sleep.
View 6 Replies View RelatedI recently had my screen replaced because of a crack. Now I find when I open the laptop to use, after being on sleep mode. It momentarily turns blue, sort of flashes/glitches then works normally. Should I be concerned?
Info:
MacBook Pro with Retina display
Is iPhoto graphic card intensive? On my Early 2008 MP every time I go to full screen mode (already evident in '09) the graphics card fan spins up and there is a discernible pause in transitioning. I think with Lion's big emphasis on full screen functionality, I will be annoyed to death with the pause and annoying fan's whirl.
Is the 2600xt really that outdated? I don't want to get a card for gaming purposes but something that will remedy this. During the presentation you see how fast the applications respond and they're using a iMac. I thought with 8cores I would be at least on par but it could be the graphics card as well. Such a downer.
I have read many of the fixes on the discussion boards and none of them have worked.
I have:
Repaired permissions (repeatedly) Reset printing system Downloaded and installed the latest printer driver (Brother HL-2140)
Downloaded and run the program "Repair 10.6.8" Downloaded and installed the 10.6.8 combined update.
Info:
Mac OS X (10.6.8)
Wondering if this is just me... I have a 17"MBP, 8GB, 10.6.1; having occasional, temporary freezes ("pauses" perhaps) where there is no beach ball....just all activity stops for 20-30 seconds and then it resumes like nothing happened (and catches up on all of the clicks and such that happened during the pause).
This often, but not always, happens when switching spaces (I have VMWare running XP in a second space).
last updates of iTunes there seems to be a problem with playing music: iTunes just randomly pauses and continues playing after a while.I believe this all started after updating to 7.4.1 it was really bad then, iTunes would pause like 20 times during a song and it would take very long for a new song to start.
View 6 Replies View RelatedSometimes when I'm streaming flash videos (youtube and other sites) the video pauses, even though it has loaded the rest of the video. It usually locks up Firefox for about 20 seconds and then continues playing the rest of the video. What could this be? I am running the latest version of flash as well. Maybe I don't have enough cache allotted to handle it in Firefox?
View 12 Replies View RelatedI'm trying to figure this out and I've gone through 'Energy Saver' settings and turned off 'Put the hard disk(s) to sleep when possible' but sometimes - not reliably, playback of a video file just pauses and then resumes as normal after about 10 seconds. It happened just the same with QT and Perian under Leopard and now happens in Snow Leopard too. Similarly, this sort of oddness happens with playback on VLC too.
View 7 Replies View Relatedalmost everytime I use airtunes, somewhere in the middle of a song, the music will quit unexpectedly. sometimes the music will resume in a three-count, sometimes longer, sometimes not at all. When i look at itunes, it looks like the song is just paused - meaning the little diamond that shows where you are in the song in the display along the top isn't inching along anymore, however the actual PAUSE button on the upper left has not been selected (meaning there is not a PLAY arrow displayed. the double bar PAUSE button is still showing). I have tried:
stopping the song (clicking the PAUSE button) and then starting it again
quitting itunes and restarting
restarting my ibook (G4)
unplugging my airport express and plugging it back in to reboot
using the airport admin aplication
completely unplugging EVERYTHING (modem, airport base station, airport extreme) and then slowly rebooting them all in order
upgrading itunes to the current version
at first, I thought it was a problem with airtunes, like the signal got lost or something, but after looking at itunes and realizing the song isn't *going* anymore, i thought the problem was with the application. but I don't know. I've never experienced this if i use the computer speakers, but then again, I hardly ever use them so I really don't know that for sure. oh, and I bought my airport base station *after* the airport express, and I'm pretty sure this problem was happening when my "network" was just my ibook and the express. (my experience level: I'm a former PC'er. I'm fairly knowlegable, but more on the software end. I know *nothing* when it comes to mac hardware.
The last few day when I play a video, apple video, itunes, abc amc morning show--the video constantly pauses.Sometimes it stays paused.I emptied cache. lion, laptop--all up to date.
Info:
ipod touch and laptop, Mac OS X (10.6.4)
I use my Mini as a music server with all music stored on an external RAID. If I import a CD while iTunes is playing music, it will finish the song and then pause the playback. Is there a workaround so it can both import and play at the same time?
Info:
Mac mini (Late 2009), Mac OS X (10.6.8)
iTunes has a mind of its own after the recent update. Opens on its own, starts playing, gets stuck, gets unstuck. I close it, it opens again.
Info:
iMac, OS X Mavericks (10.9.3)
My iMac acts like it hit a wall after the last Yosemite update. Even as I type this my screen pauses about every ten characters.
Info:
iMac (21.5-inch Mid 2011), OS X Yosemite (10.10.1)
My kids made a video, edited it in iMovie and burned it to a CD. When we put the cd into our macbook pro and play it through QT Player the video pauses and stutters and the audio is not synced up to the lips, and that's if and when the audio does come on. The CD is fine as it does play as it should on the pc desktop that we have. What are we doing wrong?
View 3 Replies View RelatedMine started blinking twice underneath green and not being recognized by my iMac 24", 4GB etc
So I just bought a second hand one from ebay, and it does exactly the same thing
I have checked the top of the screen and bluetooth is switched on
I went down to mighty mouse, and selected connect and nothing happens
I bought a Canon MX870 printer. It works great via wireless, however after say, 5 or 6 pages or print jobs, it "pauses" and stops printing. I go into the print menu on System preferences to resume printing, but this does nothing. Rebooting the router usually does the trick, and printing will resume shortly after doing that. I emailed Canon and they said to assign a static IP for the printer. I have a Belkin router, and I cannot figure out how to do this.
View 1 Replies View RelatedMy computer keeps stalling and rotating beachball won't allow me to move forwards or backwards. Ultimately I need to turn off the power. I have tried resetting the PRAM and SMC but neither seems to help for too long.
Info:
iMac, Mac OS X (10.4.11)
My macbook pro laptop recently died and I am trying to access its time machine backup data through Finder on a different computer. In each one of my folders from different dates, however, the majority of the computer folders I would like to access (i.e. desktop, documents, dropbox, etc) have a little red "no" sign in the corner and prompt the following message when selected:
"The folder “FolderName” can’t be opened because you don’t have permission to see its contents"
How can I gain permission to see its contents? As the former user, I know whatever passwords are restricting these files, but I don't know how/where to go to give permission to these folders. I've tried going into Disk Utility and changing the permissions there, but to no avail, despite successful changing of the "Sharing & Permissions" to "Read & Write" for all listed accounts.
I'm currently trying to view this on an imac OSX 10.6.8. The dead MacBook pro ran OSX
Info:
MacBook Pro, Mac OS X (10.6.8)
Tried to restart didn't work. Light is on, but nothing makes noise or anyhting. Been charging it for hours so it has power. Tested the chord on my ther computer and it worked
Info:
MacBook
I have all my music on an external HD that I've used for a few years. I told my old computer (1GHz TiBook G4 with Tiger) to export my iTunes library, which it did, as a .xml file. Then, I opened that file on my new iMac, and only about 1/5 of the songs were found, apparently. This doesn't make sense to me, as the iMac is connected to the HD when I import the old library. If it makes a difference, the TiBook was NOT connected to the HD when I exported the library. I have the two computers networked together via Ethernet right now, though.
View 5 Replies View RelatedMy computer name always keep changing with a message like "computer name X already exist in your network and your computer name is now X(2)". I have to change the computer name back to X, or the computer will be rename to X(3), X(4) .... etc. I did not change anything in my network.Is there any way to stop this?
I've previously installed OSX on my MBA using an external DVD, using a wifi remote disc option, but because of my current network situation (and current lack of external disc drive) I'm wondering if it would be possible to install OSX on the Air through a direct ethernet connection to another Mac.
Basically it would go like this: MBP <> ethernet cable <> USB ethernet adaptor <> MBA
Possible? Any problems? Any special procedures I need?
The new IMac 21.5" doesn't fit on my desk. I bought an ikea computer desk that has shelves and a place for the monitor. These new widescreen IMacs, don't fit while the old 20" did!
View 23 Replies View RelatedI decided to get a USB cable for the Canon MP650 I bought yesterday. I connected it, aligned the head and printed out a test page and it looks ok.
I used the disk that came with the printer and it said everything was installed successfully. Do I need a driver? That should be on the disk, right?
I'm using an iMac OS X v 10.5.8
I wanted to print a test photo, so I clicked on One-Click Photo Print and received an error message: The operation cannot be continued because a printer supporting Photo Print is not installed.
I clicked on System Preferences-Print & Fax, and there's nothing there. I clicked the + sign and in the window that opened, there's nothing listed there either. Why is installing a printer like operating the space shuttle?
I accidentally set up a computer to computer network and I cannot figure out how to make it go away. I also tried to password protect it, to at least lock it down, but the password is removed from the network as soon as someone logs on (and doesn't require a password to do so). Something is fishy, to say to least. I was told to go into my preferences (through Library) but I don't know what to make of the omnioutliner files. How do I get rid of this network?
View 1 Replies View Related