We just upgraded from 10.4.11 and noticed that Printer Specific setting (like line screen, scaling, wrong reading, etc) are not getting passed to our image setter. The image setter is AGFA Avantra running on a Tiapan RIP running on an NT4 server. The PPDs are generated using the RIP's EDF software. The most up to date PPD code is Laserwriter 8.7.
We had no problem in OS 10.4.11
this may be sort of a noob question but I was hoping someone could help me out. I have an HP photosmart 8050 printer hooked up to my iMac via USB. The thing is my girlfriend uses my other 2 dell laptops mainly for school while I use my iMac for school. All of these computers are on the same network and are scattered around my house.
So being in school we need to print out a lot of documentation and wanted to just have the printer setup wirelessly. I have a modem w/ the wired/wireless router, and all my computers have internal wireless cards.
How do I get my mac to always open all Microsoft word documents in Pages?
View 3 Replies View RelatedI would like to know if my MacBook Pro connected to WiFi has a specific I.D. or IP address linked to my Computer that Google can read when i open an account ( adwords account ) ?Is there any way Google can tell that the same Computer hasopened several accounts with the same machine ?
View 7 Replies View RelatedI have been searching on Google on how to set a specific color label for certain extension like .docx, .pdf, .png, etc. I was only able to change the color label for a specific by using command-I and change the color label. I want a specific extension to have a specific color label. Is this possible? It would be pretty helpful for me to spot a certain file type extension.
View 2 Replies View RelatedI have some emails from businesses that I receive all the time. I want to make it so that they go straight to my trash.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
Is there any place in the Workgroup Manager where I can set the background image of the connected computers? I can't see any, but I'm thinking it must be possible.
View 1 Replies View RelatedI have a printer set up on my mac, and my roommate wants to be able to share my printer from his PC. I find lots of information how to do the reverse of this (Sharing a printer that is plugged into a PC from a mac), ive tried everything I know how to do and cant get the PC to recognize the printer
View 3 Replies View RelatedWhat wireless router works best for setting up a wireless printer?
Info:
iMac, Mac OS X (10.7.2), E-1000 Linksys wireless router
Can someone point me in the right direction to set up a network printer on my recently purchased AEBS? Love the unit so far except can't get me Epson printer to work yet.
View 2 Replies View RelatedI have a Mac Pro which I just upgraded from Leopard to Snow Leopard. I have an HP Multi-Function 2840 hooked up to the router via ethernet. This printer previously worked through Leopard.
Now, my understanding is that for SL, the drivers for this printer are in the operating system and can not be downloaded from HP.
How do I set this up as a network printer? I would like to be able to print from my other computers in the house as well.
Please Note: Snow Leopard only provides drivers for the printing function of this machine. I am going to have to revert to other means to use this device to scan.
setting up dell printer V515w? have tried downloading several different drives and the response is they are not compatible.
View 4 Replies View RelatedHow do I set up an HP Officejet Pro 8500A Plus Wi-fi printer on my macbook air? I went to settings, then print and scan, and found my printer. Clicked on it to set it up and it's been configuring for over 20 minutes with no end in sight.
Info:
MacBook Air
I just got a new MacBook Pro. I have my epson printer on my network. How do I get Image Capture to recognize that I have a printer. Nothing comes up on devices. I'm sort of stabbing in the dark at network settings and I downloaded the latest Epson driver. Nothing seems to work.
Info:
iMac, OS X Mavericks (10.9.4)
I need help setting up network printing. I have a new router N600. I can not see the printer.
Info:
MacBook, Mac OS X (10.6.8)
why do my applications quit when I enter the printer setting for my Epson 10600
View 1 Replies View RelatedI am unable to set up our office Canon image Runner 3225 (iR3225) network printer up. I have followed the steps on both the canon, and apple site. I have also tried driver UFR II (2.24), and other drivers as well. I can look at the printer online but it will not locate it in setup no matter what I do.
I am running OS X Lion 10.7.3
I want to start afresh on my HD, i.e. reinstall from original disks and use Disk Utility to secure erase (via Erase & Install).I've read articles about pros and cons + how to do it. So I think I know how to do everything.However, from my reading I gather that Zero Erase is a single pass random erase whereas 7 Pass is secure erase (and there is a 3 Pass secure erase option nowadays)?That got me wondering - does 7 Pass secure erase make 7 x single passes over the entire disk?If it does, then when the blue bar has extended a bit over a third of the way across the progress monitor (that little bar that indicates time left) it should have made 3 passes, which would be equivalent to 3 pass secure erase?Is that an option?Is it possible to stop part way through an erase (which is part of E & I)? My original disks 1 and 2 have OS X 10.4, with OS X 10.5 included as complimentary 3rd disk (because OS X 10.5 was just released at that time).I gather I need to erase with disk 1, then install disks 1 + 2, then install OS X 10.5.
Info:
MacBookPro3,1, Mac OS X (10.5.8), 15"/ 2.2 GHz Core 2 Duo/ 2GB/ 120GB
We're hunting for a small printer for a crowded office space. There's a not much desk space or shelf space.
Only need something to print. No scanning, faxing or other functions! Hoping we can get Canon that is compatible with the inkjet 40 and 41 cartridges as we already have a printer that uses those.
Requirements:
Text documents
Photo printing
I purchased a used IMac and the previous owner had the pass word set up to just be blank, I had an external hard drive on the IMac but have since gone to a new Mac Mini and I had the Apple store just transfer all of my data over to the new Mac from the external hard drive. Not that it doesn't work, but how do I change the pass word to something of my choosing rather just leaving it blank?
View 3 Replies View RelatedI want to pass my iMAC along to my kids. System is 10.4.11. Have original Lion and Tiger OS discs. What do I need to do to set it up for a new user?
Info:
iMac, Mac OS X (10.4.11)
Safari used to let me drag an image from a webpage to the finder and have the dragged file be saved as an actual image but now all that's saved is a webloc file. I want the image saved, not a reference to the image's URL - do I now have to always use "save as" to save it?
I can understand Safari creating a webloc file if I dragged the site icon from the location bar to the finder, but to make the default behavior for dragging things that are parts of a page (not the page itself) as webloc files seems like a HUGE step backwards for usability.
Does anyone know if there's, say, a key to hold when dragging to avoid saving a webloc file or a defaults command or something to make Safari revert back to sane draging behavior?
Info:
Mac OS X (10.7.3)
I've an Internet key (settings requested: phone number/web address/primary DNS): I put only the first 2 because with the third one (needed to speed up the connection) it doesn't works. I put the primary DNS requested on MACUSBmodem (DNS page, on the left).
View 4 Replies View RelatedOne software says I cannot upload an image because the image or the container folder does not have permission. Indeed there is one "unknown" in permissions, that I cannot get to a read write no matter how hard I try -- both on the folder, the desktop, and the file (this is all on my laptop) I've done a repair permission.
Info:
iMac, Mac OS X (10.6.8), imac 27"
When a user copies an image from a browser into PowerPoint 2011 he gets text of a link back to the image, not the image itself. But if he copies from a browser into Word he gets the image, and can then copy the image from Word to PowerPoint. Same results with both Firefox and Safari. Behavior is new so I assume it relates to recent software updates but user does not recall accepting any.
Info:
MacBook Air, Mac OS X (10.6.8)
I do things like adding ram swapping Hdds. but am not really god at the software part. I got a costumer with a lock macpro that does not has the password. I know it sounds suspicious but hey he is just another costumer. I am getting the machine tomorrow so i need TO KNOW IF is possible to just put a Leopard disk and restore it? or will i have to do thing further like Formating the HDD or swapping and put another clean one to install OS X on it?
View 2 Replies View RelatedI need Rosetta, which limits me to 10.6.8. There are system glitches: Open Recent in many apps is confused. System-window sidebar has a mind of its own. Seem like I need to re-install 10.6.8. Is there a combined upgrade that collects everything since 10.6.0? Or do I have to climb the stairs, one update at a time>
Info:
Time Capsule 802.11n (4th Gen), Mac OS X (10.6.8)
Unfortunately I'm having to return my new Mac Pro, one month old. It has logic board problems. Kudos to Apple for their first suggestion. Anyway, I have 4 internal 1TB drives that I need to zero out. One zero pass on one drive takes 3+ hours. I would like to do a 7 pass on each drive, but that would take four days (90 hours) by my count before I could ship it back. And I want my new Mac asap!
Question? The most each drive contained was 500GB's. Can I do a zero pass on a drive and stop it approximately halfway through (hit Skip button) and then repeat the (half) process over again as often as I desire. Will my half used drives and/or data be zeroed out multiple times. If so this would save me many hours of zeroing out half empty drives! In short, what effect does a partial zero pass have on a hard drive?
So there's an enclosure that has oxford 934dsp and it has two fw 800 ports on it. I also have an OWC Voyager that has the same chipset and it doesn't pass thru any bus power and this is something that has to be powered by an ac adapter. OWC support told me that this is because of the 934dsp chipset and I'm skeptical of this claim. I suspect that there are enclosures out there than can pass thru bus power over firewire 800 regardless of chipset used.
View 5 Replies View RelatedHow do i know if my mini DVI will pass the audio if i use a mini dvi to HDMI converter?
View 2 Replies View Related