MacBook Pro :: Won't Load Past The Start Up Page (with The Apple Logo)
Apr 29, 2012My MacBook Pro won't load past the start up page when I turn it on.
Info:
MacBook Pro
My MacBook Pro won't load past the start up page when I turn it on.
Info:
MacBook Pro
My Macbook Pro is not starting past the grey screen and the apple logo and the rolling circle. I have tried every method and I am desperate to do anything to start my computer even erase the entire disc. I have contacted the Apple store and they told me the cost will be equivalent to $600 to just repair it and no way I will be able to afford it. I am willing to do anything and even erase my entire disc. However, for that the instructions on the Apple page state that 'Insert your Mac OS X 10.4 or 10.5 installation disc'. However, I do not have my installation disc Is there any other way I can erase the OS system and at least reboot my Macbook?
Info:
MacBook Pro
My mother's unibody white MacBook will not get past the grey apple and spinning gear when you first boot up the computer. This was after she opened a link in an email from a friend who had her email compromised. Now I'm getting spam emails with the same link from my mother's hacked email, and her computer won't even get to the login screen. I took it to the genius bar only to be told it was likely HD failure, but the windows partition works without a hitch! What could this be? A trojan? Is there any way to retrieve data (really just pictures) before I attempt to reinstall OS X?
Info:
MacBook, Mac OS X (10.6.8)
This morning, I would turn it on and it'd go to the grey screen with the Apple logo for a few seconds and then go to the icon that is a circle with a line through it. After reading online, I was able to boot it up in Safe Mode. I went to Startup Disk in Preferences. I chose the MAC OS X, xxxx and then clicked the lock to prevent further changes and then clicked restart. Now when I turn on the macbook, it goes to the grey screen with the Apple logo for at least two-three minutes and then just shuts off. Won't boot into Safe Mode now. I already tried the Command-Option-P-R keys trick like five times.
Info:
MacBook Pro
My computer wouldn't quit an application, so to shut it down I Pressed the power button until it turned off. I've tried To turn it on with cmd-v and it said <5% free audit space.I tried rebooting with cmd-s and it still hasn't worked.
Info:MacBookPro
How to get my computer to turn on? I used it on Friday and had a normal shut down but when I went to turn it on yesterday, it gets the the gray screen with the apple and the loading bar and loads half way and then just stops and sits there until it eventually shuts itself off. I have tried turning it off and then back on and holding the D key but nothing happened.
Info:
MacBook Pro, iOS 8
I'm trying to repair a Powermac G5 (dual 2.0, the first model I believe, with a new Radeon 9800 graphics card) that won't boot and I'm having some problems that I can't seem to diagnose.
The machine will boot to the openfirmware prompt or target disc mode and will show the 'OS not found' icon if left to boot from the HD (which has been wiped). If I try to boot from either the included restore disc or a retail 10.4 DVD I've tried it will show the boot screen with the Apple logo on it but no spinning status indicator underneath. It just freezes on that screen. Once it showed the status indicator but it just continued to spin for about 30 mins, at which point I gave up. Same issue if I try to boot the hardware test (except it freezes on the hardware test loading icon rather than the Apple icon). The superdrive appears to work as it is accessible in target disc mode.
I've reset the SMU and reset the PRAM via the keyboard shortcut. The one thing that leads me to think it's a firmware fault is that when I run the 'reset-nvram' command it gives an OK, but when I then run 'reset-all' it freezes rather than rebooting. Any ideas anyone?
Information:
Powermac G5 Dual 2GHz
there back in September when I got my macbook I had the problem where it wouldn't boot past the apple logo screen and it was taken away and the hard drive had to be replaced and now it has happened again! I'm so annoyed as Im getting really close to exams at Uni so need my computer but will it need to have the hard drive replaced again!? As well with it being Lion I dont have a disk with it to try utility disk.
View 5 Replies View Relatedmacbook pro, 2011, won't go past start up apple?
Info:
MacBook Pro, Mac OS X (10.7)
Reset my disc permission is Disk utility ...like the idiot i am, and now My MBA won't boot past the Apple logo and spinning cog. In Single User Mode the key problem seems to be. sudo: /private/etc/sudoers is mode 0666, should be 0440 :/ root# sendmail: warnibg: valid_hostname: empty hostname sendmail: fatal: unable to use my own hostname / is it possible to repair permissions in Single User mode?
View 24 Replies View RelatedMy Mac mini won't move past a white screen with apple logo in the center. What should I do?
Info:
Mac mini
My Mac was working perfectly fine until my charger broke. I ordered a new one online that took about a week to arrive. When I got the new charger the first time I used it my Mac was so slow some apps wouldn't even open. The 3rd time I had to force shutdown and now it turns on but won't pass the apple logo. My only worries are saving the things that were on my Mac, is there any way it can save it on a hard drive even tho it won't pass the apple sign?
Info:
MacBook Pro
I am stuck in my MacBook pro which shows white screen.
1- I tried hold C to Bogor from DVD to reinstall Mac os x , but it's not working .
2- I tried hold Shift and option to log to safe mode , but it's not working .
3- I tried reset ram, but its not working.
I am stuck and can't do anything.
Info:
MacBook Pro
i just get the apple logo and a turning wheel on start up.
Info:MacBookPro
My MacBook Pro won't boot past the white startup screen with the Apple logo. After doing some trouble shooting my best guess is that the issue is either an issue with the logic board or the hard drive, but I am no expert so I may not be right. Here is what I have tried so far. I have done all these steps multiple times and the results have varied, but here are my most recent results:
1) First off, there are no peripherals connected so that is already ruled out as the cause.
2) When I try starting up in safe mode (holding shift while starting), the Apple logo, spinning wheel and progress bar appear. The progress bar fills about a third of the way then stops. I have left it for quite a long time and it still stays at a third of the way.
3) When running a safe boot (holding shift+command+v at startup) it gives me a " SATA WARNING: Enable auto-activate failed" message, and then eventually times out. Here is the full message:
4) Resetting the PRAM (holding option+command+p+r at startup) does the second chime but only results in the flashing folder icon with the question mark.
5) I tried booting up the computer in single user mode (holding command+s at startup) and running fsck -fy, it again gives me a "SATA WARNING: Enable auto-activate failed", then eventually times out. Here is the full message:
6) I tried booting in recovery mode (holding option while starting). When I do this I do not get the OSX utilities screen. Instead I get a white screen, sometimes my hard drive shows up on the screen, sometimes it does not.
If i boot in recovery mode with my osx install disc inserted the disc appears. If I select the hard drive we are just back to the apple logo and spinning wheel. If I select the install disc it goes to the apple logo/spinning wheel again, sometimes it allows me to start running the install, but then when it gets to the step where you select the hard drive to run the install on, no hard drives appear.
So that's where I'm at. I do not care about losing any data because luckily I backed up this machine right before this started happening.
My mid 2010 iMac i7 will not boot past the apple logo? I'm running 10.7.3. I have tried restoring from TM backup from recovery mode (worked the last time this happened) however upon completion it returns to the recovery screen? I made a disk of Lion when I downloaded the first time (followed same instructions sourced from numerous websites) which does not seem to work when i set to start up from this disk, just gets to the grey screen and flicks between the apple logo, a folder icon with a question mark and the circle with line through? Now I can't eject the disk either, a message appears that system can't eject and to make sure all applications are closed? Not sure how to go about closing these applications without being able to start the system? When I tried booting from the Macintosh HD I got a message that the boot cache partition was faulty? I have ran disk permissions etc all ok. Â
Info:
iMac, Mac OS X (10.7.3)
my Imac will not start - When I try to start it I just get to see the apple and the wheel that goes around and around
Info:
iMac, iOS 4.3
I have an intel imac - can't tell you much about the details as I can't get any info out of it. I installed snow leopard about a year ago - no issue since then other than occassionally the screen goes black but nothing major.Yesterday, I backed up to my usual passport backup and then today, it froze. I couldn't turn it off or restart at all so resorted to the power button. Since then, I can turn it on, it goes to the grey screen (no blue screen) and I get the apple logo and the spinning clock/wheel. For hours and hours....So, I tried one of the apple support pages and worked through - peripherals, safe boot, NVRAM, PRAM, tried to reboot with mac osx disc (the original not snow leopard) - nothing. Absolutely nothing changes - same old grey screen, apple logo and spinning clock/wheel.
Info:iMac, Mac OS X (10.6)
When i start the computer and the grey screen comes up with the apple logo etc., a grey "loading" bar has started appearing in the bottom of the screen. Takes a few minutes for it to go away. In the meantime the computer gets very hot and the fans are up to 6000 rpm. Then the os starts up, and I cannot download anything, due to the fact that it thinks my harddrive is full, though i have more than 100 gb of free space.I cant even download the 10.6.2 now due to the harddrive appears to be full
View 2 Replies View Relatedwhen i start my imac it shows the apple logo, then the circle starts spinning and after a couple minutes it just shuts off. BTW i have windows on it as well so when i hold option it lets me open windows but not os
View 8 Replies View Relatedmy emac wont start i stays on the apple logo with the spinning gear? can anyone tell me how to fix it?
View 3 Replies View RelatedI am having the same problem in the apple store page. In Firefox works just great, but on safari wont load. I tried restoring safari, restaling it, and also cleaning fonts cache.
Info:MacBookPro, Mac OS X (10.7.3)
My 3-month old iMac was responding very slowly when I used the latest version of Safari. So I forced quit the program. From then on, whenever I turned on the iMac, it would get stuck at the Apple logo start up screen. I had to unplug the power since the machine is getting very hot after 15 mins.
View 3 Replies View RelatedThis situation began when I put my Imac on sleep. After, the screen turned on in black whit the cursor but I couldn't do anything.
Then to rebooted the machine, the apple logo and sound began fine but the screen turned off, so moving the mouse the screen turned on in black with cursor.Â
I'd tried many ways, resetting the PRAM, SMC, repairing the disk and permission, analyzing hardware, repairing fsck files.
Suddenly, when I entered in Verbose mode, mi imac brought into user choose screen and worked fine, but when I shut down and tried to start my mac in the next day, it didn´t work again.Â
Info:
iMac, OS X Mavericks (10.9.3)
I have an Early 2008 Mac Pro 3.2 GHz dual CPU (8 Cores in total) one day I started the system as usual and the system start till the Apple Gray Logo appears and then it reboots and keep doing this in (loop)
I started the Apple Hardware Diagnose and it hangs in the middle! the Apple Authorized shop/repair people told me (after the tried to fix it) it is mostly the Logic Board
Can it be the RAM or the CPUs? my mac is out of warranty and the cost to fix it is crazy! so I was thinking I can buy the parts and replace it my self.
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked. However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop? Any way to fix it? Thanks.
View 3 Replies View RelatedI am looking at purchasing an Ibook G4 but the description of the item includes this:"When you switch it on it begins to load up i.e. the blue screen with the Apple logo, but then the screen goes black or flickers. Said friend has kindly wiped the hard drive for me so now when you switch it on it makes the �opening� noise then you get a blue screen with alternating �?� and the Finder logo."
I have a feeling this may have been a temporary fault with the screen connector being loose and possibly damaged.But i assume the alternating "?" and the "finder logo" is simply a lack of OS?
My computer died last night with each application not responding. I couldn't shut down normally so I held the power button to turn it off.Â
Next morning, I tried to boot the MacBook Pro and the boot process stalled at the grey screen with the Apple Logo and spinning wheel. I let it go for an hour and there was no change on the screen. Based on Apple's desk I ran Hardware diagnostics (extended with looping disabled) and got the following errorÂ
4HDD/11/40000000: SATA (0,0) Â
The screen shot is belowÂ
I ran this again with standard testing (no looping) and standard with looping and all gave the same results.Â
Info:
MacBook Pro with Retina display, OS X Mountain Lion (10.8.2)
My daughter's old I Mac won't start. It is not backed up. We want to get some things off of it if we can. When we turn it on, we get the Apple logo with spinning wheel for awhile, then a question mark briefly and then a sky blue blank screen. Is there any hope of getting this to work? This computer is out of warranty. Does it seem that if we reinstall the Operating System we might find old data? Â
Info:
iMac, Mac OS X (10.4.4)
I just bought a Mac book air and went through VO tutor but now cannot get past the Welcome page. So after every button pushing failure I'm on my iPhone to get support...
Info:
MacBook Air, iOS 7.1.1,