I have an old 828 audio interface I've been using for years on my pc.
just switched to mac with dual intel macmini running os x 10.4
I went to MOTU's website and downloaded os x drivers, and installed them... but I still can't get the computer to see the device. Profile or whatever shows the firewire ... yet device doesn't show up
Is there nothing like scan for devices on that port I can do in os x?
I've attached my external drive to my 17 inch macbook Pro, on the wirewire 400 port, and it shows up under the profiler as as "Unknown device". The same drive looks fine on my iMAC OS version on both machines is 10.5.2.
If I use the USB2.0 port on the drive and connect it to either machine it can be seen by both.
My Macbook Pro has been running into constant problems actually printing to any wireless device.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
I currently have my second MBP that I got from Macmall and both in a matter of two weeks have had similar issues. The first I managed to get returned and replaced, that is a seperate and complicated story in and of itself. This particular issue started with a boot up sequence that was taking about 5-6 mins. After going through the drill with Applecare thought I could restore using Time Machine. That's when I found out that the FW400 port no longer worked to power my Oyen Digital 250G FW drive. Any thoughts as to what might be the problem? This is my second MBP and Oyen Digital FW drive. I had them both replaced!
View 10 Replies View RelatedI recently had to take my mac mini to pieces to upgrade its RAM to 2GB. I initially had problems with booting up - it would get to the white screen with the apple logo and think for about 2 minutes then restart and repeat the process indefinitely. I managed to fix this by removing the clock battery for a while. I also zapped the PRAM after installing. But now, the strange problem is that OS X wont boot up (it will get to the white screen, think, then restart) if my firewire devices are connected. In case this helps, I have two HDDs and a DVD burner connected in daisychain to the firewire port. It definitely boots up fine with any other peripherals/connections. Once OS X has booted successfully, I can then connect my Firewire devices which seem to work fine.
I have tested my new RAM with memtest and rember and everything seems fine. After upgrading my RAM, I would also get two alerts on start up - "Do you want the application "configd" to accept incoming network connections" and "Do you want the application "mdnsresponder" to accept incoming network connections ". I have fixed this problem with the help of this post: [URL]. Aside from the horrible idea that I have damaged some hardware, does anyone have any clues as to how I can mend this? A wise colleague of mine said that if it was a windows machine, he would look at the BIOS settings as he thinks my computer is trying to boot from one of the HDDs, and that I should try to find a list of boot drives and remove the firewire HDDs if they're on it. I know macs don't run BIOS, but is there anything similar I could check?
I'm attempting to upgrade a family member 800mhz iBook G3 from 10.2 to 10.4 using my old iPod as the install drive. (Restored a DMG, etc) Only problem is that (other than being an ancient computer, I guess) is that said iBook doesn't see the iPod until after OSX loads (white spinny guy).
Tried holding Alt at bootup (not listed), setting it as the default boot device (just skips it and goes right to the HD), and just running it from OSX (reboots, straight back to OSX desktop).
Is there something I'm missing? Does this model G3 not allow detecting boot devices at start up? I'm kind of at a brick wall here. Should I just bite the bullet and do a target disk install?
in my system profiler under firewire it says : -
FireWire Bus:
Maximum Speed:Up to 400 Mb/sec
Does this mean that an external hard drive with firewire 800 will be no good to me? Or does mean that the last firewire device was only capable of 400 mb/sec?
I'm wanting to connect my DV Camera and an External Firewire HDD to my mini. I really only need two firewire ports: one for the camera and one to daisychain any further Firewire HDD. This is all in aid of being able to digitize HD Tape footage with the mini using FCP so I can do all the editing etc of the Mac Pro. I've found a few online such as:The Belkin Firewire 6 Port Hub, Belkin Hi-Speed USB 2.0 and Firewire 6 Port Hub and the 1Lynx 800 Advanced Firewire Hub (99MO018202).The stackable Belkins look great
View 5 Replies View Related'08 Mac pro kernal panics every time i turn on my firewire recording interface, an echo audiofire 12. the strange thing is, it runs fine if i turn the interface on before booting the computer.
View 1 Replies View RelatedWindows 7 has been awesome so far, but there are still the occasional driver issues. What I'm having trouble with now is firewire. I used to use HFS Explorer to access my external (HFS formatted) hard drive but it no longer shows up in HFS Explorer. Windows doesn't even make the "device connected" sound when I turn it on (yes I'm running HFS Explorer in admin mode/Vista compatibility). Pretty sure it's a firewire driver issue, but I have no clue who makes the firewire for my early 08 MBP.
View 12 Replies View RelatedYesterday I took delivery of the following kit- http://www.dolphinmusic.co.uk/produc...firewire-.html
As you can see, it comes with the FCA202 Audio interface - http://www.dolphinmusic.co.uk/produc...io-fca202.html
I opted for the FireWire package as it has the most better quality mics. I got it all hooked up, but for some reason, my Mac is not recognising my new sound device at all. I was looking under the Sound part of the Control Panel, but nothing new would register. I checked the FireWire part of the Device Manager (appologies I forget the actual name of the application). The Firewire device was listed as "Unknown", if I was to remove the device and refresh, it would show nothing. So i've got the feeling that its been seen, just not recognised correctly.
I tried a few things to try and help my situation.
1) Disconnecting any other attached device
2) Rebooting several times
3) Leaving system off and unplugged for 10-15 mins
4) Updating all software
5) Resetting my xxxx (I forget the term, but it involved rebooting holding CMD, Option, R and P) - can someone confirm how I know if this was actually reset?
6) Going into Activity Manager and confirming the Audio driver is loaded
From what I've read, Firewire config issues can be common with Macs. I am running an 18 month olf iMac 20" with 4 gig ram. I've not used my FireWire port for a while, about 6 months ago I used a FW external HD which didn't have any problems with. Alas I don't have any other FW devices to plug in and test the port. The final thing I'm going for is to leave the system unplugged for 10 hours, which will be ready to check after work.
One thing I was thinking about though - would getting a powered FW hub be of use at all?
One day I couldnt wake my macbook from sleep with my firewire WD Mybook 500G connected, so I power off the macbook manually and start it up again. It then triggered kernel panic, and i found that my macbook resume normal if i do not connect the firewire external HD. I performed PRAM reset and even PMU reset but it still couldnt help.
Below is the kernel panic report:
Tue Jan 27 19:36:08 2009
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x00597742, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x279f4000, CR3: 0x01055000, CR4: 0x00000660
EAX: 0x000037fc, EBX: 0xffffffff, ECX: 0x00000435, EDX: 0x279f4000
CR2: 0x279f4000, EBP: 0x279f3748, ESI: 0x279f3796, EDI: 0x00000000
EFL: 0x00010217, EIP: 0x00597742, CS: 0x00000008, DS: 0x02ac0010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x279f3568 : 0x12b4f3 (0x45b13c 0x279f359c 0x1335e4 0x0)
0x279f35b8 : 0x1a9c68 (0x464700 0x597742 0xe 0x463eb0)
0x279f3698 : 0x1a038d (0x279f36b0 0x1 0x279f3748 0x597742)
0x279f36a8 : 0x597742 (0xe 0x48 0x279f0070 0x10)
0x279f3748 : 0x59abea (0x279f3796 0x0 0x0 0x0)
0x279f39d8 : 0x59eadd (0x4078600 0x279f3b9c 0x279f3a1c 0x279f3a18)
0x279f3a38 : 0xf01f38b3 (0x279f3ce8 0x1b6 0x46a408 0x2c8f075)
0x279f3d18 : 0xf01f3b65 (0xf001 0xf001 0xf001 0x279f3ddc)
0x279f3d68 : 0xf01e338c (0x42c0900 0x4370290 0x279f3f48 0x0)
0x279f3df8 : 0xf01e350a (0x397afe4 0x279f3e1c 0x0 0x20594d2f)
0x279f3f78 : 0x3df460 (0x3311a34 0x397aee0 0x397af24 0x2b08780)
0x279f3fc8 : 0xf01a0887 (0x3e97de0 0x0 0xf01a30b5 0x3e97de0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb0522518
Kernel loadable modules in backtrace (with dependencies):
com.apple.filesystems.msdosfs(1.5.3)@0x596000->0x5a1fff
BSD process name corresponding to current thread: WDMemeod
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CAA)
I've got a rather strange thing happening...Disable ALL network interfaces, including Bluetooth, have only my Ethernet enabled, going directly to DSL modem (not router).Yet, I am picking up a computer in my network browser. I can browse this computer's shared docs just fine, and in fact, he is not setup very securely so I could easily delete his entire music and photo library or send malicious files to him (or her).
But, I am wondering how I am even seeing this device. From what I know, on a DSL connection, you should never see any other computers on that ISP. I know sometimes this will happen with Cable, but I've never seen it on DSL.How do I find the IP or MAC address of this computer? I actually work at my internet provider, and I'd like to see if I can find which customer it is and why I am picking them up on my network browser, and hopefully alleviate the problem.
How do I find my macbook pro using icloud on another device?
Info:MacBookPro, iOS 5.1
Lately I have been having trouble with the audio. The sound doesn't work on the Macbook, and it can't seem to find any devices!
I tried plugging in headphones, but nothing helped.Â
In the time leading up to this fault, the sound in the mini jack was very poor, and sounded really bad.
When I plug my TV to the computer, by HDMI, I works fine. Even with sound. Oh, and I can't adjust the sound - it simply tells me that there is no device.
Info:
MacBook Pro, Mac OS X (10.6.8)
My MacBook Pro (OSX 10.6.8) can not find the FireWire port. Until now there hasn't been any problems using the FireWire, but now it just deny any knowledge of it, so to speak.The audio device lights up when I connect it to the MBP (yes, I did connect it when in off-mode), so it seems to work in a way.
View 1 Replies View Relatedmy itunes wont sync my ipad. it wont even find it as a device. its never been connected to another mac or pc.
Info:
iPad 2, iOS 5.1.1, 27' imac
I have a camera that has an SD slot and I use an 8GB card. When I connect my camera to my Macbook, it looks like it's going closer to uSB 1.1 speeds than USB 2.0, nowhere close to 480 Mbps. This is really inconvenient and would like a faster solution. I've searched Amazon and I've found CF to FireWire 800/400 readers, but none for SD. I've found a few USB 2.0 ones for SD, but USB 2.0 is not nearly as fast as Fire Wire in the real world. Anyway, does anyone know of Firewire to SD card readers? I'd really like one. It annoys me they only have fire wire for compact flash.
View 8 Replies View RelatedI bought an Airport Extreme and am trying to set it up. I installed Airport Utility and have my Airport turned on. The problem I'm having is that Airport Utility is saying it can't find any wireless devices. I have the Airport's Internet WAN port connected to my wall's ethernet port and the Airport's status light is solid green. What I want to do is get a wireless signal from the ethernet port on my wall. Everything in the set up guide and everything I find online has to do with setting the Airport up with a DSL or Cable Modem.
View 3 Replies View RelatedI have a macbook pro and the audio on it the other day was perfect. Now i cant get it to work. It wont let me un mute it and under system preferences it says that no output devices are available.Â
Info:
MacBook Pro
So earlier after installing a windows 7 ultimate 64 bit RTM copy into bootcamp, things started acting up;
After installing some updates for 7, rebooting, it took about a minute to get the HD icons up to even choose one, and after that it was fine, except then the windows partition eventually just had a blinking cursor in the top right and stayed there.
I went into OSx, removed the 7 partition completely! my HD is one partition for Osx, but when I boot now, it takes yearsssss to just boot to osx, but if I hold option, then I instantly get a Macintosh HD (that's it) and it will go straight away.
What do I need to do? Reinstall SL? Please god no.
Partitions seem to be all messed up, maybe I will re create a windows install, and remove it again. (Xp this time)
Edit, This happened on 2 different MBP's one a 2.8 duo after I put on 7, they both take forever to boot to OSx. (With no BC partition even on)
My MacBook doesn't appear as a device when I sign into 'Find iPhone'. What do I need to do?
Info:
MacBook Air (11-inch Late 2010)
Connect and run restore. Gives me error. Unable to restore. Device isnt elligable for requested build. Ive tried everything it wont restore.
Info:iPhone 4, iOS 5.1.1, Macbook Pro (late 2008) OS 5.1
If I install Microsoft office on my mac air 2gb 64mb, will it slow my system down? I also have a macbook pro that i dont take out the house with Microsoft office already installed. Am I best to install Pages on the mac air or will it cause compatibility issues when working on files between the two devices?Â
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.7.4)
I plugged in a firewire/usb 2.0 hd up to my emac and the cords were accidentally yanked out of the computer. I was given an error message that any data may have been lost since it was not safely removed. However, the problem is whenever I plug the firewire device back in doesn't register at all.
View 2 Replies View RelatedCreated vuescan for my scanner, since microtek stopped making drivers. Can't figure out the problem. I can't find answers anywhere online, and I need this scanner working yesterday. I got it to work on my laptop since that's still running 10.7.3, but that's no practical. Did 10.7.4 upgrade do that screwed this all up?
Info:
PowerMac, Mac OS X (10.7.4)
Getting errors when trying to update to 5.1 on iPhone 4s and iPad 1. Iv tried to update through the device and on iTunes and its not working. Both devices are NOT jailbroken. iTunes saying network connection can not be established. And trying through iPad's software update on the device says " Unable to check for update. An error occurred while checking for a software update."Â And I clearly have internet connection.
Info:
iPad, iOS 5.0.1
I recently bought a Hp OfficeJet pro 8600 plus printer and have set it up fine on my desktop pc. When I went to install it on my MacBook it wont let me set it wirelessly because it states that The wireless network settings were successfully downloaded to your device. However, your Mac was unable to locate the device on the network.
Please make sure that:
- Your Mac is connected to a wired or wireless network that has access to your device.
- Your device is connected to the wireless network "home".
Click "Retry" to attempt to connect again using the current settings. Click "Go Back" to enter different settings. The weird part is that everything is set up fine as far as the printer it seems that the mac doesn't want to cooperate. I am running OS X Lion with the newest downloads and updated.
Info:
MacBook Pro (17-inch Mid 2010), Mac OS X (10.7.4)
Can't log and capture hdv footage (on dv tape) using Firewire into FCP 6. Keep getting message: Unable to Initialize Capture Device.Â
Went to easy setup and I think I got that right and matching my camera setting (HDV 30p). Not sure what I'm missing.Â
Info:
iMac, OS X Mavericks (10.9.4)
I connect 2 Iomega external disks and in the system profile I see them under the firewire tab.
I tried them on my macbook and it found them right away.
But on the mac mini they dont get mounted or it is like it is not proberly finding them What can be the problem?
