Software :: PPTP To Windows VPN - Old IP Address
Dec 4, 2010
I am trying to make a PPTP VPN connection to a Windows server. This connection used to work, but I changed my router DHCP address. Now when I make a VPN connection (and it does connect), the IP address (under System Preferences, Network, VPN) shows 192.168.210.104. This is an address in the old router's DHCP configuration. The new configuration should be a 192.168.200.x address. My Ethernet (and Airport) IP addresses are in the new range - 192.168.200.x. How do I force my PPTP configuration to 'forget' the old address and use the new one? I've deleted the PPTP configuration and created a new one
View 1 Replies
ADVERTISEMENT
Jan 15, 2008
I'm connecting to a VPN network and while I can connect just fine and connect to a remote desktop (using latest RDP) and a "local" IP, it will disconnect me after a few minutes. This happens on both my Tiger (wired) and Leopard (802.11n/5ghz) machines. Similarly, I loose connection if I SSH to one of the linux boxes on the server. However, when I connect to the same VPN network using a windows machine, it stays up perfectly. I thought at first it was just Leopard, but my Tiger machine did it too. The connection is fine on my end.
View 13 Replies
View Related
Jun 25, 2012
As far as I can tell everything is setup correctly but every time I try to connect I get this message: "You were disconnected by the communication device. Try reconnecting. If the problem continues, verify your settings."
Console Log:
6/25/12 5:11:40.382 PM pppd: PPTP connection established.
6/25/12 5:11:40.443 PM pppd: Connect: ppp0 <--> socket[34:17]
6/25/12 5:11:40.447 PM pppd: PPTP error when reading socket : EOF
6/25/12 5:11:40.447 PM pppd: PPTP error when reading header : read -1, expected 12 bytes
6/25/12 5:11:40.447 PM pppd: PPTP hangup
6/25/12 5:11:40.448 PM pppd: Connection terminated.
6/25/12 5:11:40.454 PM pppd: PPTP disconnecting...
6/25/12 5:11:40.455 PM pppd: PPTP disconnected
I am trying to connect to a Linux based VPN server. I have double checked my username and password multiple times, made sure the MTU is set the same on client, server, and router, and tried turning the encryption off and on on the server and the client. Nothing has made a difference, I get the same error every time. I am able to FTP and SSH into the Linux box.
View 2 Replies
View Related
Dec 17, 2007
how to change the MAC address of the virtual machine under Fusion? I want WinXP installed on my virtual machine to have the same address (set by me) every time it is run.
View 7 Replies
View Related
Dec 19, 2009
I am trying to setup an XP virtual machine with its own IP address on the iMac so I can remote into it from my laptop. I have tried both VMWare Fusion and Parallels to do this. But the VM only sees the network in Shared mode (called Bridged mode in VMWare). But in that mode, the VM gets a random IP address not in the same subdomain as my local network.
When I change the networking mode to Bridged (called NAT in VMWare) the VM gets an IP in the correct sub domain (192.168.0.xxx) and it gets the auto configured Gateway (192.168.0.1) and DNS Server (192.168.0.1) but I can't see any machines on the network. I can't even ping the router (192.168.0.1). The only thing I can see (Ping) is the host iMac (192.168.0.3). But I can't see any other machines or connect to the internet.
I am getting identical behavior in both Parallels and VMWare fusion which makes me think I am doing something wrong.
View 7 Replies
View Related
Jan 3, 2010
After initially installing win 7, and taking a few stabs at the correct driver for the wireless card in my mac pro (apple installed), i got wifi working with a public network.
HOWEVER, i installed windows updates, restarted, and now it's just not working again!
it says that there is not a valid ip address... my macs get on fine...
how to diagnose and fix? the win 7 dianostics do nothing.
View 16 Replies
View Related
Mar 11, 2010
This is not Mac related...
Here is the situation
We are organizing our static ip address list.
For open spots, we are moving people with higher addresses up into the new addresses to fill in gaps.
Did a physical check of all addresses being used.
Ping open addresses, nothing comes back.
Go to change a computers address to that open spot, and it says it is already in use.
Question---Is there a way to boot that ip address out, since it is not being used, and give the address to the computer we want to use it?
View 1 Replies
View Related
May 5, 2010
My mom just got a new mac and wants to transfer address book from Her old Windows computer to her new Mac any suggestionsShe uses Microsoft outlook and mail on her mac
View 1 Replies
View Related
Jun 7, 2006
I am a comitted Mac switcher trying to put my lovely new MacBook onto the office Windows network. I can connect to the office wireless network (WEP key etc) and the little radar Icon in the menu bar lights up. However, I cannot get the MacBook to obtain an IP address via DHCP. I just keep getting the default self assigned address (169.....).
However, when I connect to the network via a cable using the built in ethernet connector, I get the DHCP address just fine and everything works OK.Also, if I assign an IP address manually to the wireless card (checking it is a free address!) it accepts the settings but I cannot network, not even a basic ping of another machine on the local internal network (all our internal machines are using 10.0.0.x addresses and 255.255.255.0 sub net)The DHCP server is not in the wirless router but is a Windows server machine.This is driving me crazy. I have called Apple care and they just dont want to know because there is a Windows machine in the mix. I expected better from them,
View 24 Replies
View Related
Nov 21, 2010
Using a G4 IBOOK with OS 10.5.8. Recently converted IBOOK from just my wifes computer to both of us so it is now dual usuage with both of us signing in to our respective files/e-mail, etc. My side has a problem never experienced before. My apple mail system address book has all the names the dock address book does but is missing almost 2/3rd of the actual e-mail addressess. I have tried to redo the dock address book in hopes it would change the "internal" mail book, but to no avail. It id difficult to add a recipient to an outgoing e-mail via the dock address instead of the apple mail address book.
View 3 Replies
View Related
May 5, 2012
I'm trying to setup mail on Lion Sever (7.3). The only way I can get it to accept incoming mail is to specify the whole FQDN of the server in the address. For example the domain name is example.com and I have a user set up called john. Sending mail to john@server.example.com works.
But sending mail to john@example.com (which is what I want) returns an error:
554 554 5.7.1 <john@example.com>: Relay access denied (state 13).
For internal DNS, I have:
example.com - primary zonemail.expample.com - alias server.example.comserver.example.com - 192.168.1.2 [URL] - alias server.example.com MX record [URL]
I see references here to problems in mail on 7.3 but not this specific problem.
Info:
Mac OS X (10.7.3)
View 3 Replies
View Related
Aug 1, 2010
Can you print your address book with all the names, address, and other info?
View 3 Replies
View Related
May 20, 2012
how to specify which of several email addresses should be used for a member of a group. It starts by selecting the menu item "Edit > Edit Distribution List." From there it explains how to select the desired address for a specific person. All well and good...Â
BUT...Â
Try as I might, doing various combinations of name or group selections in the address book window, I cannot seem to get the "Edit Distributuion List" item to be un-greyed. Effectively, the program is not allowing me to do the edit function I need to do on this one group member.Â
Am I missing the secret handshake in this process? Why should it be this hard to do this simple function?Â
Which raises the larger question of "What did Apple do to the Address Book application in general?" This issue is only the tip of my iceberg. The whole app seems to be harder to use than before.Â
Info:
iMac (24-inch Early 2008), Mac OS X (10.7.3)
View 3 Replies
View Related
Mar 29, 2009
If I have more than 1 email address in my contacts, which is the rule, to whom will be sent , I checked, sometimes in Home, other Work
View 2 Replies
View Related
Mar 20, 2012
I must be missing something very obvious, but I can't seem to set Address Book to add all new contact info as "Work" entries. I have to edit every new entry and change all the fields from "other" to "work." This appears to happen when I "grab" phone or email info from an email message.
Info:
MBP 2.4 Core 2 Duo, Mac OS X (10.7.1), iPhone 3Gs, iPad 1 and 2
View 2 Replies
View Related
Jun 14, 2012
Does anyone else agree? Can I make this so somehow?
Info:
Mac OS X (10.7.4)
View 6 Replies
View Related
May 16, 2009
So, is it possible for the address bar "top hit" or "history" to recognize part of a web address if you don't start with it?
For example.
In firefox, when I start typing macrumors, I get forums.macrumors, macrumors....
View 4 Replies
View Related
Nov 13, 2009
I have a MB and MBP and they both have the same IP address, so the MBP won't work on our wireless network anymore.
How can I cahnge the IP address? We have a netgear router and are with Jersey Telecoms.
View 1 Replies
View Related
Mar 23, 2012
I opened my safari today and when I was about to type the website that I want to go to I couldn't find the space where you type it at.. I don't know what happened?
Info:
MacBook Pro (13-inch Mid 2010)
View 1 Replies
View Related
Jun 11, 2012
This is probably a stupid question, but why isn't there an address contact button that you can click on in a new message from MAIL? Am I missing something here? In all previous versions of the OS one could just do that and a list of contacts popped up and then you could click on one and it would go to the "To" slot. There's got to be an easier way than to open the contact book, find an address, copy it, then place it in the message "To" slot.
View 2 Replies
View Related
Jun 6, 2012
Address book on my iCloud has letter tabs down the side for quick searching names but the address book on my dock does not. How can I get them?
Info:
Mac Book Pro, Mac OS X (10.5.2)
View 1 Replies
View Related
Feb 11, 2012
Address-book doesnt work after update from Snow Lepard to Lion 10.7.3 PB says your address-book is 5.0.3. PB says You have adressbook 10.5.3, yes, but now?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Jul 2, 2012
How do I transfer my existing Address book to an iCloud address book without typing them all out again?
Info:
MacBook2.1, Mac OS X (10.5.8)
View 4 Replies
View Related
Feb 21, 2012
I have Lion 10.7.2 and am running Safari version 5.1.2, hopefully I am good so far. I'm not sure what hapenned, I must have done something, but one day my address bar decided it wanted to play hide and seek and it won....the "show toolbar" option does nothing upon clicking it, neither does the "customize toolbar" option.
Info:
MacBook Pro, Mac OS X (10.7.2)
View 2 Replies
View Related
Apr 9, 2012
I am running Address Book 5.0 on Snow Leopard on one machine, and want to share my contacts on another machine running OSX10.4.11, Address Book v4.0.....can this be done?
View 1 Replies
View Related
Oct 28, 2009
Is it better for me to buy the upgrade for windows 7, from vista to windows 7 or to buy the full copy? If i buy the fully version, should i get rid of my pardon, and re-do it with bootcamp, or should i just do it over my current pardon? (Vista) I just want the best way, less pain, less anger. Im willing to pay more for full IF IT IS THE BEST way to do it.
View 1 Replies
View Related
Feb 7, 2009
so i have a windows XP professional disk, SP2 and all. i am trying to install windows, i get as far as partitioning the disk, but once it says "please insert XP disk" i do that, and it will think for a few minutes, and make a loud noise [coming from the mac] then a message pops up and says 'please insert installation disk.' the disk is brand new, what am i doing wrong? should i be partitioning the windows side larger?
View 2 Replies
View Related
Feb 6, 2012
I was trying to move my page with the mouse and moved the HTTP address bar on the top right off the page. I have no idea where it went and I can't get it back. I only have the back & forward arrows.
Info:
iPod touch, Mac OS X (10.6.7)
View 1 Replies
View Related
Apr 7, 2012
i cannot see my address bar
View 1 Replies
View Related
Mar 12, 2009
i have my aluminum 2.4GHz 4gb RAM aluminum macbook with the geforce 9400m. and i was wondering. is DirectX 9 better then DirectX 10?. even if the difference is only 8 FPS it still counts.(really the only game im going to play is elder scrolls 4 oblivion)
View 17 Replies
View Related
