How can you install Mac OS X using Pacifist? I am installing a Leopard Beta on my iBook and I can't get the DVD to boot. So I thought that since I have a image of it, that I could boot my other Mac, boot the iBook into target disk mode, have Pacifist install to the iBook HD, and it should work. Even after blessing it will not boot.
View 7 RepliesI followed the instructions here: [URL] to install iphone sdk on power pc using pacifist. However after the installation of the files , the mac used md5 checksum to validate the files and files were found not to pass. I then cancelled the validation. However I could not find the SDK programs that were installed in the mac. How do I delete the 5gb of stuff that was installed as I can'tfind them anywhere? I then proceed to attempt one of the comments instructions on that page:
1. Make the iPhone SDK.dmg read/write-able with Disk Utility using convert -> to read/write.
2. Mount the R/W dmg.
3. You need to delete some unneccessary file so that you can modify the installer config file, because the image is completely full. I choose the PDF in the root of the dmg.
4. Modify /Volumes/iPhone SDK/iPhone SDK.mpkg/Contents/iPhoneSDK.dist :
- Line 71 ( in function agreedToSLA() ) - modify "return false;" to "return true;"
- Line 81 ( in function SDKPresent() ) - modify "return false;" to "return true;"
but I was unable to attempt part 4 as I couldn't find iPhoneSDK.dist to modify.
I cannot install anything, therefore I tried to use Pacifist but whenever I try to export anything I get the error -60008. I also get this same error number when I tried to remove something from my applications. I cannot even create a new user account to see if the problem persists there. It is all grayed out. Also, whenever I move my cache to trash I get the error: The operation cannot be completed because the following error occurred -60008
I'm using Mac OS X 10.6 I also do not have Installer.app only the Adobe Installer. I have no idea how this may have been deleted though. When I go to repair disk permissions using disk utility I get this one message: Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired. I suspect this is the problem, how can I sort it out?
This is the first time i reinstalled(clean install) my snow leopard on my MBP. All went fine but then i inserted the disc for bundled application (which contains the ilife apps) but it keeps failing.
It says that "the installation failed. the installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance".
I've also done my research on this matter. I've gone thru a few steps i tried as below without success:
1)normal install - fail
2)repair permission - fail
3)install in safe mode - fail
4) install using another admin acc - fail
5) made an image out of the disc and install - fail
6) used a similar disc(my dad's since we have identical version) - fai
7)updated my system and install - fail
8) reinstall the mac - fail
i cant think of any other solution as im a bit noob when it comes to mac. is there any other things i could try before taking it Apple?
Info:
MacBook Pro, Mac OS X (10.6.8)
I've been trying to install and use BootCamp from Apple, so I can use Visual Basic for my classes. Obviously, I need Windows for this. Anyway, i downloaded BootCamp, installed it, and then Windows XP. After this I was told to insert my OSX disc to get the drivers. Well nothing happened at all. I suppose because this install of Leopard didn't include BC, it was a seperate download.I then read that BC Assistant should give me the option to burn a drivers disc. I looked at the provided screenshots, and right where the button should have been, there was nothing.
View 6 Replies View RelatedMy MBP was recently squished in a motorcycle accident and its hard drive and superdrive were destroyed. Is it possible to buy a new hard drive, put it in an external USB 2.0 enclosure, then install OS X on it using the discs that came with my destroyed MBP in a different Mac, then put the hard drive into the squished computer and have it use that hard drive as its startup disk? The motherboard on the squished computer is fine, I just can't install OS X on it because it has a broken superdrive.
View 4 Replies View RelatedI searched for a while trying to find the answer but did not find it. I just installed Vista Business via Bootcamp. I am not able to access the internet or anything. If I read the help stuff right I need to use the OSX install disk to install the drivers. The problem is, I don't have the install disk. Is there any other way to get the drivers? Or am I just missing something easier?
View 5 Replies View RelatedI'm using a iMac PowerPC G5 that I've received from my brother. He gave it to me with a fresh install of Leopard on it, but he unfortunately no longer has the disc that came with the computer that he also used to format it before handing it to me. With that said, I ordered a new internal hard drive. Naturally, I'll need to re-install Leopard, but I don't have an install disc anywhere. How is this going to be possible? Or will it not be? Do I have to buy a new Leopard install disc? If so where and how much?
View 6 Replies View RelatedThe internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
I jsut did a fresh install. wanted to use my SL DVD but the MBP i5 refused to star with it so I used the original DVD (10.5) and upgraded with the SL DVD to 10.6. However after the initial SL Installation, it tried from the SL DVD and this failed. I did a manual restart, starting from the HD and everything ran fine. however today I note there is a locked file on the HD named Mac OS X Install Data. It contains 181 .pkg files.Now I suppose this should have been moved or deleted as part of the install process. Can I move them to a file where they belong?
Info:
MBP, MM, MBP - 10.6 + Windooz XP on a hard partition
I have a dual 2ghz G5 that i wanted to clean off and start fresh. I wiped the drive with disk utility and tried to install os from tiger install dvd. G5 keeps hanging at install and also at disk utility. I've swapped both the osX install dvd disk and the entire dvd drive, but still hangs at os load or utility.
View 3 Replies View RelatedI am trying to install Aim Sniff which runs through terminal. I am slowly figuring out how to use terminal to run .pl files but the readme files says I need to install these dependencies.
Code:
Requires Samba to perform SMB lookup features.
Requires the following perl modules:
Net::Pcap;
NetPacket::Ethernet qw(:strip);
NetPacket::IP qw(:strip);
NetPacket::TCP;
NetPacket::UDP;
DBI;
Unicode::String qw(utf8 latin1 utf16);
Proc::Daemon;
Proc::Simple;
FileHandle;
Unix::Syslog;
GDBM_File;
I got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
View 9 Replies View RelatedI have an aluminum Macbook from late 2008, model A1278. I just had to replace the hard drive, and need to install an OS on the currently blank HDD. Problem is, my CD drive doesn't work, so I can't just install from a disc. I had installed Mountain Lion on my old hard drive, but the original OS was Snow Leopard. I haven't succeeded in getting any of my information off my old HDD. Is there another way to install either Snow Leopard or Lion onto my new hard drive?
View 1 Replies View RelatedI bought the family pack for Leopard. I installed Leopard on my G4 laptop fine.When I tried tried to install on my G5 I got a fail to install due to a source problem (?)In any event I restarted from the Tiger hard drive and it's totally screwed up my computer. It tries to start and I get initial Apple logo for about 2 seconds then it locks up and I get a bunch of computer code.
Information:
G5
Mac OS X (10.4.9)
Searched the archives but no luck so far. My old PB G4 is running 10.4.11. When I installed the OS, I chose not to install iPhoto and iMovie because I didn't think I'd need them on this machine. I'd now like to add them, but am not sure how to do it without wiping the hard drive and starting completely from the beginning. There's got to be an easier way...right?
View 4 Replies View Relatedi just bought a macbook pro and i want to do a clean install but it didn't come with the install disks. is there a way to do it without buying new disks?
View 24 Replies View RelatedI just replaced the HD in an iBook G3 I have laying around with a toshiba 40gb. The install went fine and I formatted it in disk utility using mac os x extended (journaled). I ran it for errors and it checked out fine. I also ran the apple hardware test CD and everything checked out there too. The problem is I am getting a kernal panic no matter what I do. I started off installing 10.3 and the first disc installs fine, but then when it restarts it gets an instant kernal panic. I tried 10.4 with the same results. Then I tried the 10.2 discs that the iBook came with and it would get the very last step of the install on the 1st disc and would not go any farther. It said "one minute remaining" for over an hour.
I have taken a picture of the error log that shows up and you can see here: The top line got cut off but it says "panic(cpu 0): Unable to find driver for this platform: "PowerBook4,3" Like I said, everything checks out hardware wise and i have tried three different versions of OS X.
I purchased the new Mac Box Set with Leopard 10.5.6, iLife '09 and iWork '09.
I was 50/50 on which type of Leopard install I wanted to perform today.
Looks like the disc made the choice for me and performed, what I'm assuming, is the upgrade. All of my files, settings, etc. were intact after the reboot.
I have the Win 7 RTM currently installed on my Mac Pro, on a dedicated internal hard drive. I'm running VMware 2.0. I have the retail version of Win 7 arriving today. Anyone know if I can just install through Windows, i.e., while running my existing Win 7 installation via VMware, or do I have to go through the whole clean install via Bootcamp routine?
View 7 Replies View RelatedDid a search through here but couldn't find anything concrete. What are the differences between a fresh Snow Leopard install and a factory Snow Leopard install? I ask because I bought an Intel SSD and don't know if I should bother cloning the hard drive that will come with my new 15" MBP or I should just install a fresh copy from a Snow Leopard install disc. I'm aware macs come with next to no junk pre-installed, but are there some factory settings that are worth preserving if they aren't documented well?
View 11 Replies View Relatedi have tried to re-install leopard into my macbook but it is just all a mess. i inserted leopard cd (original copy) into macbook to do a clean install to my new(to me) used macbook. the computer message after choosing language says "cannot install mac osx on this computer".
1. used disk utility to reapair disk...did no work
2. erased hd..still did not work.
3. made partition to install from external hd...now just made a total mess with computer.
4.i try to start computer from dvd drive with original leopard cd...still does not work. says cannot install mac osx to this computer...
i have macbook intel core duo 1 gig ram and enough memory.
please help i dont know what to do!!!!!
love my mac. buy i messed it up....
You have mail version 4.2 (1078/1084). It can't be used on Mac OS X Version 10.6.8,How to install application Mail from Optional Installs on Mac OS X Install DVD?
View 2 Replies View RelatedI'm trying to install the latest version of iTunes and the pop up tells me that I need to install Mac OS X 10.5. How do I do that?
Info:
iMac, Mac OS X (10.4.11)
I tried to install Snow Leopard on my MacBookPro but it cannot install and cannot be ejected. I need to eject.
The reason for this is a long story. My logic board was replaced and my Mac was wiped clean. I am not trying to recover from back up but could not figure out the next step after the recovery finished. So I tried to install OSX from the disk that came with my Mac. Probably not the right corrective action.
I need to remove the Snow Leopard DVD and finish my recovery.
Im not doing a back up hd i want a new install I install the drive without the screws in the hd,does that matter? I start hold option and only the cd comes up,i click it wait 2 mins then says you have to restart Did this about 10 times,please help before i take this hd out and smash it
View 24 Replies View RelatedAnyone knows if the install cds shipped with the macbook pro C2D are able to install OSX on a PPC mac. Macbook pro install CD to install tiger on a G4 Powerbook?
I'm new to Mac. I feel I have been suitably rehabilitated from my former ways. I bought a MacBook Pro. It came with an installation disc for Leopard. I'm not sure if it's an image or if it's the OS install DVD. I bought a Mac Pro, quad Xeon 64 bit monster. The guy I bought it from had to retain the HDD for legal reasons. So, I bought a couple of drives that I'll slot in. Question: Can I use the install disc from my MacBook Pro to install Leopard on my Mac Pro?
View 12 Replies View RelatedLong story short: I've been having some issues with Leopard (and it looks like it was probably my fault for simply choosing the "Upgrade" option when I moved up from Tiger), and so now I'm looking into a clean install Leopard, which according to all other indications should fix my problem. Now, my initial reaction was to go with the "Archive and Install" option, but since I've been reading more about what people have to say, I'm starting to wonder if I should just choose "Erase and Install", and then restore from Time Machine instead? ...or is there really even a significant difference in the end?
I would like to keep everything as intact as possible, which makes me think Time Machine would be better, but then at the same time I've read stories about people having difficulties with restoring from Time Machine, and losing certain applications/preferences, etc... but sometimes they say it works just fine. So I don't know. But I'd like to get some second opinions before moving forward too quickly and then possibly regretting my decision later.
When I got my external drive, I backed up my copy of leopard onto my drive so that if I lost the disks, I'd still have a copy.Such a thing has happended, and I need to do a clean install.Is it possible to install (reformat and install) from a FW400 drive?I know its possible to burn it to a dual layered dvd, but I don't think my iMac can burn them, and the fact that they're stupidly expensive.
View 3 Replies View Related