I have a hard drive that I connect to my computer via an IDE to USB adapter. It works quite well, most of the time. A couple days ago I tried copying a large file to the drive (which is in FAT-16 I think) and the copy froze after 28 MB. The hard drive failed to eject, so I just disconnected it without ejecting. After I dismissed the device removal warning, I immediately plugged the HD back in and opened disk utility. I tried to reformat it, but the computer froze and my screen dimmed and the warning came up telling me to reboot in several different languages.
Now, whenever I plug in the hard drive, it is not acknowledged by the computer at all. I always end up unplugging it after a couple minutes. After I unplug it, a folder with the name of the drive (which happens to be "untitled") appears on the desktop, but I can't do anything with it. This folder is classified as a disk and it is acknowledged by Disk Utility. A couple minutes after I disconnect the HD, Mac OS X always quits and I have to reboot. How can I repair this hard drive? How can I get Disk Utility to acknowledge it?
I have an imac, I moved my iphoto library on to an external hard drive (lacie usb 2.0). I moved my iphoto library that was on the internal drive to my trash folder. (Dont want to delete until I know everything works properly).When I'm using iphoto I keep getting this message "Please make sure the disk containing your photo library is mounted and restart iPhoto".
Tried to restart didn't work. Light is on, but nothing makes noise or anyhting. Been charging it for hours so it has power. Tested the chord on my ther computer and it worked
I have an external hard drive that I have been using for back ups for several months, but now I get an error message that says, "The disk you inserted was not readable by this computer". I looked up other peoples issues with this, and they have used things like disk warrior to fix it, but I am not very interested in saving what's on the hard drive anyways. I just want to clear out the hard drive and start fresh.
My WD firewire 800 drive has stopped working, I can hear it spinning when I plug it in but the light doesn't come on and my computer doesn't recognize it. I've tried both the firewire and usb connections.
Does anyone know of an application that will let me back up sync certain folders on my computer to my external hard drive. Because I use two different computers (iBook and a thinkpad(Windows)) I need to keep them both the same (Documents wise) So, I have an external hard drive. Which I would like to be able to sync certain folders on my ibook to my hard drive. I am running iBook G4 Mac OS X 10.4.11.
I am looking to buy an external hard drive for my intel Mac and MacBook Pro to download and save some 8,000 plus photos. My computers only have USB 2 connections. I am finding that most new external hard drives have USB 3 connections. Can I use an external hard drive with a USB 3 connection on my older Mac computers? If so do I need an adapter to connect USB 3 to USB 2?
I have an external hard drive I was using all morning. This afternoon, the hard drive isn't showing up on my desktop. It does show up in my system profiler under usb. When I go to disk utility to repair it, it isn't there.
the only screen I get is the apple logo then an x, and ? mark. it keeps repeating this. computer was new to a backup on external hard drive. Iphotos were put on external then trashed. about 3200 images. I thought this was slowing it up. the macbook pro it is non functional now. aboaut a 3-4 year old computer.
when I insert my 'FAT' formatted external hard drive (Samsung M3) into my mac book pro it comes up with the error message that says "the inserted disk is not readable by this computer" and I therefore cannot access the files. The story (potential further details):Â
1. I had a problem with my mac where it took hours to load each time I turned it on, would only work when power was plugged in etc. so I had to reformat my mac hard drive (when I tried to veriify it said repair, that wouldn't work). So i'm starting with a recently reformatted, clean mac.Â
2. Before doing this I reformatted my external hard drive (whilst on windows machine) to FAT32 (so I can use on both windows and mac) so that I could back up my files.Â
3. I then transferred files from mac onto external hard drive and then also put them on a windows machine.Â
4. After reformatting mac hard drive when I then tried to transfer files back onto the mac I get the 'not readable' error.Â
My external hard drive has been repeatedly ejected improperly and now it is not displaying on my computer, not even in disk utility. How do I re-mount this external hard drive? In the past when this has happened, all I had to do was go to Disk Utility or use DiskWarrior to fix the issue but now it won't even show up in either of these apps. Â
2008 MacBook Pro 10.9.3, WD My Studio 1 TB External HD
I just bought a new 1 TB external hard drive for back up purposes. When i connect it via USB to my Snow Leopard macbook pro, it gives me a "this disk not readable by this computer message". I click ignore, and it lets me do whatever i want to the disk - read, write, etc. I have tried repair disk - tells me it's good to go, and tried reformatting several times - thought not zero disk data or the 7 pass bs.
which is faster & more efficient? to download photo & or video content from a memory card directly to an external hard drive? or to the computers main drive & then move to the external hard drive?
I am after faster transfer/download speeds with less hang ups
I often use external hard drives to back up my work. Recently I purchased a 1TB Lacie drive. I took a week to build a lovely new file structure for my work. At the end of this week, I began deleting the old files on other hard drives so as to transfer my new neatly structured work back on. In the midst of this, the brand new hard drive crashed, illiciting only the clicking sound of death.
That hard drive, some of my work (a very small amount but still) and a week's worth of sweat and blood was gone in an instant. The person I took it to to look at it mentioned a power surge as being a possible cause for the crash. Anyway, I returned the lacie and bought a 1T Western Digital Mybook (silver). I then began dumping the old back ups onto this.
A week in and this one is crashed too. No clicking sound of death. It calmly sits on my desk with it's unceasing unblinking blue light and refuses to show up in utilities no matter what I do. So I assume it's a goner also. I'll return it also of course. Is something causing these drives to fail...that exists in my walls? Are there power surges causing my drives to die...? OR is it simply a case of bad luck with my choices of new drives?
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
I've had a lot of problems with my iMac G5 power supply and since I have newer computers I've decided to get rid of this computer.Â
I want to save the hard drive and put it in a case, then use it as an external drive on my other Macs.Â
What sort of case do I need to shop for? Should I look for SATA or what exactly is the proper nomenclature.Â
Is USB 2 the preferred choice, or Firewire, or what? Is there a USB 3? I use a mid-2010 27 inch iMac with the intel processor, and I needed to buy an adapter to use my older Firewire external drive. Is Firewire a dodo?Â
i have a power mac g-5 quad with an external dvd drive and a external hard drive and 2gb of ram. on my ext. hard drive i downloaded mac the ripper and that is where i put all my dvds, now today on my pmac i was using mac the ripper, popcorn, itunes, safari all at once and it froze up on me?why? could the ram be an issue? how may programs can i use at once with my pmac?
Looking for opinions or comparisons on performance between an internal mac hard drive vs an external firewire 800 hard drive or better. Is the performance on an internal MP drive or iMac internal drive much faster than connecting to a firewire 800 drive? I'm sure it depends on the drive, I'm wondering about apple factory installed internal drive vs say a WD external firewire 800
In other words... I have moved my music library to the external hard drive, as per an earlier thread I read here on the forums. It worked like quite well. Now that it is working perfectly, I am having a hard time leaving well enough alone. It is never a good idea for me to think too much...Can itunes be installed and run on/from an external hard drive? If so, how?
my mac has a pioneer dvd drive in it and it wont read my dvd+r dl and I am wanting to burn a mac os 10.5.dmg to it and install 10.5 but the dang thing is ejecting it. So what should I do to get it to work get the external dvd and run it from it or get a external hard drive and try it that way.
This is what im trying to do. I have a macbook with 120gb hard drive. thats not enough space from my music collection. So i was wondering how to make itunes run off a external hard drive. I looked around and found was for a PC.
I have an elderly Q950 with an external hard drive with everything backed up onto it. The external drive is a Micronet ADV1000E, with a sticker on the back saying it's Macintosh or PC compatible. I also have an iBook laptop, & PC Dell Inspiron 1300 laptop. As I have the 2 laptops, the Quadra hadn't been switched on for maybe one year. On the weekend I tried to get it to boot up (with & without the external drive switched on), but all it does is display a grey screen with an image of a 3.5" disk with a '?' in the middle. If I start up from a Norton 3.5" disk it still can't find the external or internal drive. If I try booting up with my finger in the shift key it doesn't want to know.
1. Any idea why the Quadra isn't seeing either the external or internal drive & what can I try to do? 2. Is there any way I can connect my external drive to either my iBook or Dell? At the moment I have no cables to connect the old & new - are cables available & if so any idea where from? I've looked high & low but so far no joy. 3. Is it possible to remove the hard drive from the Quadra or the external drive & put in an external drive enclosure, then connect that to either laptop? I see there are drive enclosures available which are Mac & pc compatible. This by the way would be a major undertaking for me. I'm by no means a computer dunce but would be wary of trying it.
when I went into the "get info" window for the G-Drive and switched the ownership/permissions dropdown from "read/write" to "no access". When I tried to switch it back to read/write, it would say read/write in the dropdown, but then I'd try to access the g-drive and I'd only get to the first set of folders--when I'd click on a folder, there would appear to be nothing in it. (Not sure if this is really related to my current problem.) I then tried ejecting and remounting the drive, but it didn't show up on my desktop. Stupidly, I assumed my computer didn't recognize it at all and unplugged the firewire without ejecting thru disk utility. When I did this I got the device removal error. I then plugged the firewire back in and tried repairing the disk in disk utility, but it said it didn't need repair. When I click on the G-Drive in disk utility the info at the bottom says:
Mount Point :/Volumes/G-DRIVECapacity :465.6 GB (499,973,603,328 Bytes) Format :Mac OS ExtendedAvailable : Owners Enabled :NoUsed : Number of Folders :0Number of Files :0
0 Files! I'm worried about losing all my stuff! I then tried DiskWarrior (v4.0). When I first opened it I think the info at the bottom said "This disk is a Mac OS Extended disk. This disk does NOT appear on the desktop." I'm not quite sure about that "not" b/c after rebuilding the directory of the G-DRIVE I know it now says "This disk does appear on the desktop." Anyway, it's definitely not appearing on my desktop. After building the directory it said "All file and folder data was easily located. Comparison of the original and replacement directories indicate that there will be changes to the number, the contents and/or the attributes of the files and folders." And later: "19 files (and 2 folders) had a directory entry w/ an incorrect text encoding value that was repaired." And:
I then clicked "Replace" whereupon it said it was successfully replace. But still it did not appear on the desktop even after ejecting, remounting, rebooting computer, etc.
If anyone has any advice I'd really appreciate it. I'm pretty desperate here! Thanks!
(FYI I already tried going into the Finder permissions and unclicking and reclicking the box for showing disks on the desktop. Also, I plan on getting DataRescueII in case that's necessary, but i hope it isn't)
So, I've been searching the forums, as I just had a 1TB (well actually a dual 500GB) external drive stop mounting and start clicking on me. I'm trying to find a way to recover files, and I know I've seen a lot of posts on DriveSavers, which. I was searching around, and I was wondering if anyone has ever heard of a company called "OneWorld Data Recovery." It was something I stumbled across, but I can't find any reviews, or nail down anybody who's used it.
Clearly, this seems fairly suspect, but I figured I'd check and see if anybody had ever heard of it or used it. Thanks!
My internal 1TB hard drive on my iMac is dead and I don't have the money to replace it at the moment. I have everything backed up on an external 1TB drive using Time Machine. As a workaround for the time being,Is there any way I can install the system on the external drive and use that as the boot drive without erasing the Time Machine Backups? It seems to me I would have to have two partitions for the external drive, one for the system, and one for Time Machine. But is there any way to add a partition without erasing the existing one with Time Machine only on it? Â
I was using Mail I have set up my email again, so I don't want to lose anything currently in my inbox, but want to retrieve old messages and addresses. Running 10.6.8 OS.
