My powerbook was working fine but i shut i down over night and when i turned it on the next morning it refused to boot. All i got was a grey screen with the folder icon which flash between a question mark and the finder icon.
Ok, on my Powerbook in sig whenever I put a CD in it stays in for about 20 sec and then spits it back out, but when I boot up with the CD in it reads it just fine. This is making me mad because I'm trying to install the Burning Cruasde, and it is four discs.
I have a PowerMac G4 that isn't saving the settings when I shut the computer down. I think it might be the battery on the mobo, but I'm not totally sure. does anyone know of any other reason why it would do that or confirm my suspicions?
So I recently upgraded the RAM and installed a 7200 rpm hard drive into my powerbook 1.33. Everything went smoothly, but now after waking from sleep, the spinning wheel shows up and the computer goes unresponsive.
I recently acquired a 15" TiBook from someone who no longer wanted it. He took good care of it and with the exception of a few slight surface scratches, it looks practically new.
That being said...it won't turn on!!
My question is -- does the battery need to be good for the unit to turn on, even if you've got it plugged into A/C power? The amber light on the plug comes on as if it's charging, and it never goes off. When I hit the little indicator button on the battery, nothing lights up. It would seem quite obviously that the battery is bad, but would that stop the unit from running off of wall power?
If it's just a bad battery I'll gladly buy a new one, just wanted to check before I waste my money!
Just bought a second internal Hard Drive for my Dual 2.5GHz PowerPC G5 machine. Simply for storage, so no system apps are going to run off it. I've researched enough, can't seem to find an answer in writing. Hopefully this is a simple question to answer...
Basically the HDD is a Seagate Baracuda SATA drive. You know how the old IDE drives came with a jumper pin that you can switch from Master to Slave? Well, it appears SATA drives have an option of 1.5GB/s or 3GB/s instead. (News to me! A personal first internal SATA install!) I certainly know what that means, just curious if I want the jumper capping my speed at 1.5GB/s on this specific older Mac model or if I should simply open it up to 3GB/s.
For the time being, I've left it capped at 1.5GB/s. It makes sense that the system BUS would be the definitive capper of HDD throughput...such is why I'm asking if there's any benefit of opening it up, or leaving it capped.
My CD/DVD ROM drive recently went faulty with a split internal ribbon so I decided to use it as an pportunity to add CD burning with a Combo drive. DVD burning wasn't really an option as I only have 3.5g of a 9.8g HDD to play with.
I recently purchased a used last-generation iBook on Ebay and immediately uncovered what I believe is a significant problem. While using the tracking pad and simply scrolling down a menu or passing over icons, it will be as if I've clicked on the mouse button and I'm thrown into unwanted pages. Further, I can tap on the tracking pad and it will likewise act as a mouse button and I can access anything I would ordinarily use the mouse button for.
Clearly, this is something I'm not happy about. Before I go yelling and screaming back to the seller and make threats, is there something I can do as far as a fix on this?
I installed a new 250GB WD ATA hard drive in my 450mhz Sawtooth G4. The computer sees the drive, it works in target disk mode but nothing will install.
When I try to install Tiger from the DVD or the 4xCD set it gives an error after a minute of installing and says to restart. The Tiger disks crash my G5 as soon as I try to boot them. When I try to install Leopard via target disk mode from my G5 it says it cannot be installed on this computer.
This isn't one of the computers that has to have the OS installed in the first 8gb of the drive partition is it? I don't want to install 10.3, too much of my software isn't compatible with it. It was running 10.4 fine on the old 30gb drive.
I just received my ATi Silencer 3 Rev.2 for my 9800XT. If I install the fan onto the card it doesn't look like it's going to fit into the Power Mac G5. The clearance under the card is too small. Anybody know a way to install the fan to make it fit in the PM G5?
I brought my iBook G4 to school today, and it sent the whole time in my backpack. When I got home, I turned it on, and it started booting up, but when the screen came on, it was only gray. I opened it, and saw that the lcd was still plugged in, so what could this be? Can the 32mb vram iBooks get the graphics problem?
my Mac has developed a problem where it would work fine for a couple of minutes, but then the fans would come on full blast, it all works fine but it's really loud and gets on my nerves quite alot.
would replacing the fan fix this or is it something more complicated then that?
I purchased an old Emac 700mhz G4 with OS 10.3.2. from a local school for my kids. When I install programs EG: a kids game off CD it goes through the install wizard and installs no problem. But when i click on the program Icon to run the game, it wont run it. It seems like it trys to run it as the icon does one bounce down in the tool bar at the bottom of the screen but then it disappears and nothing happens. I really want to get it connected to my wireless network for my kids and it has no internal wireless card so I purchased a Netgear WG111V3 Wifi USB adapter. The same thing happened. It installed the program no worries but will not run the setup wizard to get it working? I click on the icon and same thing happens .. icon bounces once in the toolbar and then nothing?
I have an old 867 Mhz G4 MDD that I would like to be able to leave running 24/7 as a server, jukebox etc. Right now it's noisy (these things are legendarily loud) and power hungry. It won't have to work very hard. What could I do to make it efficient and quiet enough to run 24/7, without dumping a lot of $$$?
Obviously what I really need is a mac mini, but this will have to do.
Late last night, I ran into some problems with my iBook G3. It's the 700 Mhz model, with 384MB of RAM. Nothing else special in terms of hardware config (unless an Airport card is special). OS X 10.2.8.
Basically, the computer seemed to hang and I did a hard reboot, and upon starting up I got a folder with a flashing ? .
I can't seem to find my Install disc 1 to run Disk Utility or just boot up - hopefully I will find that when I go home tonight (or maybe I left it at my parent's place), but I checked using the Hardware Test CD and it didn't detect any problems.
I am having problems opening the CD drive, so I've had to open it using a paperclip. Sometimes it doesn't appear to be using the CD.
I also have run the Micromat test CD that came with Applecare (of course this machine is almost 4 years old so that's finished...) and it detected a problem with the Read Buffer last night, but then I guess the battery ran out while it was on the last test.
This morning, I ran the Read Buffer, Write Buffer, and Volume structure tests and the first two passed very fast (unlike last night), but the Volume Structure test failed. I'm not surprised since I've been aware I have issues with this before. I tried to repair before going to work but at one point it seemed to hang so I gave it another hard reboot.
Last night, I would sometimes get the apple logo with the spinning "clock", and sometimes I would get the ? but it would never get to the login screen.
I have a PowerBook G4 that I'm primarily using for audio editing and sound engineering. I would like to get multiple displays going on my laptop to make editing easier. I have heard that the TripleHead2Go won't work with a Powerbook, but I read a blog of someone actually getting it to work. Has anyone gotten this to work, or know anything about this. Here is a link to that blog.
it seems like every few times i start the computer the balance of the speakers changes from the middle to left or right output. it's not a big big deal, but quite inconvenient. what could be causing this probelm?
Can someone look at the information I've attached and extrapolate if this means my battery is "close to" DEAD?
Slowly over the last 3 months my computer shows a 100% charge and when I uplug the adapter it gets to about 90% (within 3-4 minutes) and then shuts down without a warning.
I have an eMac (ATI Graphics), which I'd like to use on my home wifi network. I bought an Airport Extreme card and installed it - but the icon doesn't appear on screen.
I have a Powerbook G4 17 that I have been working on. I recently replaced the screen and verified that it worked prior to buttoning it back up. When buttoning the powerbook back up, I nicked two wires with screws. One was part of the LCD wire that comes from the LCD itself. The second was the airport wire that is wrapped around the screen. I wrapped them back up with a cover and preceeded to get using my comp again. Once finally put back together, I could not get it to turn on.
i installed the airport extreme card from my G5 cos she wants it in her bedroom but it's not connecting to the router,
my router is a Thomson TG585 V7
i never had this problem with old airport, it only seems to be with extreme although the card was connecting to the network from my g5 was basically inches away from it, the Emac is on the floor about 2ft away i goto connect and it just keeps timing out, i've made sure the wpa key is correct and even tried manually entering the network config details.
I load the OS, get to my desktop and i don't see any clock, wireless or battery. it soon went to blue screen, then back. now it is changing between 2 shades of blue.
I bought a powerbook off ebay, it worked but on startup occasionally a folder icon would appear. I rebooted from the original discs which seemed to do the trick. However the original discs are too old for many of my apps, so I bought some newer install discs (osx 10.5) I put the install disk in and got the panic message 'panic: Im hanging here' The answer seems to be to run a disk repair (am i right?) However to do that I need to eject the install disc, I can't get the install disk out and of course it keeps tripping up everytime I start it. There is no secret little button to eject the disk manually. I have tried holding down apple and S but the install disk over rides everything and trips the mac up. I think ill be okay if I can just get this disk out.
I've had my iBook G4 for about 4 years now. I replaced the battery two years ago and have had to replace the charger twice. My current charger, which I bought rather cheaply on ebay, will only charge the battery when my computer is shut down or sleeping.
This makes it very difficult to work as my current battery is losing charge quickly and plugging it in is of no use when I am using it.
Is there anything I can do to change this? Or do I need a new battery?
It doesn't power on at all not one sign of life. Nothing went "pop" and I have changed the power cable too so its not that. Is there anything I can do or has it bit the dust?
Ok now I have a problem now with my PB. I upgraded to Tiger (bought from Apple.) I now can't play DVDs! When I was running Panther I could pop in a DVD and the DVD Player started up. Now with Tiger, I put in a DVD It mounts on the desktop (like any other cd.) I can still burn and read cds, but can't play dvds.
