my clamshell iBook [URL]I am looking desperatley for a CD ISO that i can burn that will let me run disk utilities on my hardrive. if you have any software like this?
View 4 RepliesI have a dual 1.25 ghz MDD Powermac G4. It was working fine until a couple of days ago. It froze up, I restarted it. I got a blank blue screen.
Also, the computer made some awful clicky noises that I've never heard before.
I booted from the OS X installation CD. Disk utility lists the WD1800 hard drive, but I can't do a re-install and there's no option to repair it.
I can't erase or partition it because when I try, I get a failure message saying it can't be done ("chosen size not valid for chosen filesystem"). The HD is listed in system profiler... with a capacity of 0 bytes.
I assumed that the hard drive had died, so I went to a local PC shop and bought the only IDE drive they had (a Maxtor 6l250r0). I installed it, then booted from the OS X CD.
I know that new hard drives need to be formatted, but I assumed that this could be done with disk utility.
But disk utility can't find the new hard drive, doesn't list in the left column. It shows the optical drives and the install CD and the old WD hard drive which can't be erased or repaired, but no new hard drive.
It's not listed in the system profiler, either.
I checked the cable connections and tried installing it in the front carrier rather than the rear, but nothing works - disk utility and system profiler can't recognize it.
The only other desktop mac I have access to right now is my old 450 mhz Sawtooth G4. I tried putting the HD into the sawtooth and got the same results - disk utility and system profiler can't find the new HD at all, but has no trouble finding the old 20gb HD and the DVD and zip drives.
I'm... not really sure what to do here. Am I doing something wrong?
I want to add Drive Genius and Disk Warrior to my recovery Hard Drive partition on my Macbook pro. I can make it visible but can I add them to the patition once I make it visible or is it read only or exactly the right size for what's on it?
Info:
2 mbp's, mac mini, ipods, iphone 30, Mac OS X (10.7.2)
I recently purchased a 500gb LaCie hard drive to use as as extra storage for media, not necessarily for back up purposes. I cannot seem to find it either under disc utilities or in the finder window. Has anyone had this issue with a hard drive and if so any suggestions?
View 12 Replies View RelatedSo so annoyed right now. Today my 12" G4 powerbook started to become slow, lots of spinning wheel, delayed menus etc. I checked file permissions, rebooted and it just kept on getting slower. Eventually it wouldn't get past the white apple screen.
I booted off the Tiger DVD and ran disk utility to fix and repair permissions again. It wouldn't let me repair the disk as I kept getting this error:
'Repair volume failed with error could not unmount disk'
I had to reboot again, and eventually my hard disk no longer appears in Disk Utility. I tried to boot into safe mode and get this:
'"I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus"
So now I pretty much can't do anything with it. Failed Hard Drive?
I have a very old E Mac running version OS X version 10.1.5. My Mac is showing a flashing question mark so I have tried to repair it using the Install Disk provided with my E Mac. Unfortunately, when I insert my Mac OS X Install disk (which is for version 10.1.4) and press the C key at startup and click on Disk Utility the "Repair Disk" button is greyed out (although I am able to Verify the Disk.) How do I get round this problem? (I should add that I have had the flashing question mark once before, and I was able to repair my E Mac on that occasion as I was able at that time to click on the "Repair Disk" button. However, I can no longer do this.)
I have also tried using my OS 9 Install Disk, as I was using OS 9 the last time before the flashing question mark appeared. When I go into Disk Utility using that disk, I am able to click on the "Repair Disk" button but it lists errors that it says it is unable to repair.
Info:
eMac, Mac OS X (10.1.x)
Error: The burn to the OPTIARC DVD RW AD-5690H drive failed. The disc drive did not respond enquiry.c and can not recover or retry.
View 3 Replies View RelatedMy PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
Disks I put in the Superdrive, external hard drives, or anything in the USB or Firewire (thumbdrive, etc) -- nothing shows up on the desktop. All are visible in Disk Utility. USB thumbdrives and external hard drives are visible in the sidebar in Finder, but disks are not (only disk utility).
Because of this I can't burn a disk because the disk is not being recognized. In Disk Utility, the external hard drives appear mounted and can be opened in Finder, but why aren't they appearing on my desktop (they used to)?
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies View RelatedI think my superdrive died in my dual-core PM G5. This is what it's doing: I'll insert a DVD and it'll sit for a few seconds, then eject it. It DOES show up in my system profiler though. Is it dead, or is this a software problem? Oh- I should mention that the last thing I did was use Visual Hub to burn an AVI to a DVD. That worked fine. Afterward- nothing. I'm running OS 10.4.9. Help!
View 4 Replies View RelatedI need to know how to store multiple DVD movies onto one DVD.
I was told to download a free software called "Handbrake", but I cannot find the free download for the version that is compatible with my 10.5.8 Mac OS X.
Is there a way to import and burn the DVDs without downloading software?
Info:
iMac, Mac OS X (10.5.8), I need to burn multiple dvds to one
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies View RelatedI have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies View RelatedThe problem is with a mbp running Snow Leopard. I created a dual boot with win 7. I was playing around with the partitions, and at one point installed SL on both partitions, sure i did some other bone head moves that i can't remember. Now cannot remove the second partition. I think i may need a boot disk with a application to partition the HD from the disk?
View 1 Replies View RelatedOur macbook woke up with a blinking hard drive. I went to boot up with a CD and run Disk Utility, and used the install disk that came with our Mac Mini.
Instead, it says I can't install on that mac, and all options are disabled.
I didn't expect to be able to install from that disk, but why can't I even use disk utility?
Obvious answer to obvious question - I can't find the Leopard disk I used with the macbook.
For some reason when I'm trying to erase a CD in Disk Utilities, after clicking the "Erase" tab, every button under it is disabled. Including the "Erase" button. I tried various CD-R's, what's the deal?
View 14 Replies View RelatedDoes Mac OS X Disk Utilities correct permission on all the files and folders on the machine? or is it only on systems folders? If I need to correct permission on every file and folder on the machine, how do I do so?
View 7 Replies View RelatedRan routine disk utilities and Yasu. Now Safari wont load off dock, ap folder. Tried to trash and reload. Wont allow it.
Info:MacBookPro, Mac OS X (10.7.3), Safari 5.1.5
I've been using OSX since OSX.1 and I have yet to run into a time where Disk Utility did not come up with False Positives. In latest version Yosemite, all Print Driver components from all supported manufacturers that are part of Yosemite, show up as false positives. I haven't counted but seems close to 100 +files.
What I would like to know is. Why is it so tough for the systems developers which mst likely some of the best in the world, Ca not come up with a script that would monitor Disk Utilities for false positives and mark them as invisible after say the third run. This would be reset each time a new Disk Utilities version comes out.
How long has OSX.1 been out 15-20 years? You would think in that period of time this issue would be fixed. I realize as OSX used FreeBSD UNIX that it is a Constantly moving system being updated al most daily. But still you should be able to come up with something to prevent wasting tim repairing items that don't need to be repaired.
I used Mavericks previously a smaller portion of the same Driver files came up as false positives. When I switched to Yosemite the list grew 3 fold.
Info:
MacBook Pro, Mac OS X (10.1.x), Yosemite OSX.10
i just installed a new 2nd, (750 gb) hard drive into my g5 because my first 250gb is nearly full. I'm trying to launch logic but the file is way to big. It wont let me install this program from my new, second hard drive because the message i get is that it supposed to launch from the primary or running hard drive. Can anyone tell me how i can make my second hard drive my new primary hard drive? I got the .dmg for my leapord osx. but not the originals anymore. can anybody help me with this. i'm pretty sure it's simple, i just don't know how to do this.
View 5 Replies View RelatedI had to force a shutdown as Safari, mouse and Word would not respond. Command+Option+Escape would not work.
Turning on now will only boot into OS X Utilities with options of:
1. Restore
2. Reinstall OSX
3. Get Support Online
4. Disk Utility
1. Trying to restore I found my backup but the next screen lists no hard drive at all??? Can't go on.
2. Can't reinstall OSX Mavericks as when I click on the "Recovery HD" it says, "This disk is locked"
4. Disk Utility says everything is fine
About a week ago I purchased a 2007 Macbook off of Ebay. It arrived in the mail and i opened it only to find out he had not deleted a majority of his content. I looked up how to reset it and I did. It turned back on and displayed a Mac OS X Utilities page. I tried repairing my disk and that didn't work. I tried erasing it & after a couple of times that worked. Except I cannot get past that point. I have no Time Machine back up since I just purchased it. So I decided to try my last option and tried downloading Lion. It had asked for my Apple I.D. and I typed it in and once i clicked continue it said that "iTunes is temporarily unavailable" so I tried it again. Nothing. I even tried my mother's I.D. It still comes up saying that it is temporarily unavailable. I cannot access it. I'm stuck on that Utilities page and cannot access anything.
Info:
MacBook Pro, OS X Server
Can't access to mac os x utilities to repair disk from a macbook pro 15" with lion. When I restart holding command key + R it would get stuck in a grey screen after the apple appears.
View 14 Replies View RelatedI was wondering if this HD was compatible with a PB G4?
[URL]
I know the old drive was ATA, but this one is Ultra ATA.
The Verify failed when checking the drive at the physical disk level, but the main volumes passed.Is this "normal", i.e. should I just be checking the volumes?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I just bought a new Mac Pro 6-core and an OWC 120Gb SSD drive. My question is putting the SSD on optical drive bay or Hard disk drive bay, is there any difference in performance? My understanding from my old PC is never to share the SATA cable with the optical drive as it will take the transfer speed of the optical drive, because they are running in the same "channel"?Is the 2 SATA cable in the optical drive bay 2 separate distinct ports/channel?
View 6 Replies View RelatedSo around 5 years ago i got the WD-160JB hard disk drive. I want to see all the things i did back then. I want to be able to connect this WD-160JB drive as a external hard drive to my mac.
What i am wondering is if you can somehow have a cable or something which links the USB from the MBP to the hard disk.
Info:
MacBook Pro, Mac OS X (10.7.3)
