Can't access to mac os x utilities to repair disk from a macbook pro 15" with lion. When I restart holding command key + R it would get stuck in a grey screen after the apple appears.
View 14 Replies
The Verify failed when checking the drive at the physical disk level, but the main volumes passed.Is this "normal", i.e. should I just be checking the volumes?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I have a very old E Mac running version OS X version 10.1.5. My Mac is showing a flashing question mark so I have tried to repair it using the Install Disk provided with my E Mac. Unfortunately, when I insert my Mac OS X Install disk (which is for version 10.1.4) and press the C key at startup and click on Disk Utility the "Repair Disk" button is greyed out (although I am able to Verify the Disk.) How do I get round this problem? (I should add that I have had the flashing question mark once before, and I was able to repair my E Mac on that occasion as I was able at that time to click on the "Repair Disk" button. However, I can no longer do this.)
I have also tried using my OS 9 Install Disk, as I was using OS 9 the last time before the flashing question mark appeared. When I go into Disk Utility using that disk, I am able to click on the "Repair Disk" button but it lists errors that it says it is unable to repair.
Info:
eMac, Mac OS X (10.1.x)
Fortunately I got a time machine backup. And its restoring the drive while in Lion recovery mode. Here's what happened... I dont have a router a my place at the moment and so my two phones (iphone 4 and htc android) connect to my internet using my MBP's wifi via internet sharig. For some reason they were not able to get an IP from the mbp. After doing some wifi swtich toggles and forgettig & rejoining the network, i decided to reboot all my devices. I shut down my modem, phones and restarted my mbp. On reboot, after the chime, it showed an unsusal 'progress bar' under the apple logo. The bar progressed to about 10% and then the mbp just powered off. This happened several times even after PRAM and SMC reset.
So now i booted with cmd+r pressed and in recovery mode ran a 'verify disk'. It said the verification stopped and that i should repair the disk. When i tried to do that it said the disk cannot be repaird and that i should back up as many files as possible and attempt to format the disk and restore it with time machine. It is precisely what im doing at the moment.
1. Mbp wont sleep even when internet sharing is off
2. Mbp wont lit the onboard display upon opening it in clamshell mode until i removed the 3.5mm audio cable of my speakers from the audio out port!
Info:
MacBook Pro, Mac OS X (10.7.3), Mid 2010
I just tried to use my MacBook pro but its showing a loading bar and it loads for like 5% and then shuts down.I read the instruction booklet and it says that I should tried to repair the disk or reinstall Lion but when I tried to repair it stops the process and when I try to reinstall its telling me that the disk is Locked...
Info:
MacBook Pro, Mac OS X (10.7.2)
I've been having problems with iCal and would like to reinstall it using Utilities Disc 1 with the Superdrive. However, there only appears to be an option to reinstall ALL the bundled software, at which point I've aborted the reinstallation process. Sledgehammer to crack a nut! It's only iCal I'm having trouble with (e.g searches not clearing down, "today" button greys out.) If it's not possible to reinstall just iCal from disc, does anyone know a way to "repair or mend" a malfunctioning iCal?
View 2 Replies View RelatedI have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
I have run the Disk Utility verify function against my system partition. It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.I think this could be because the partition is encrypted. The utility does not offer me the chance to unlock the partition with my passphrase.How can I repair the filesystem errors on this partition?
View 2 Replies View RelatedI am trying to hook a macbook pro up to a windows workgroup. I follow the directions to go into utilities and then Directory Access. The Directory Access is not there.
View 2 Replies View RelatedI received my macbook this afternoon and am currently trying to network my old dell with it so I can transfer my files. However, I cannot find the 'directory access' which is supposed to be in my utilities file- I have 'directory utility' but this has nowhere for me to enter the name of my windows workgroup (as per networking guide says I should) and thus cannot enter it into finder>go>connect to server!
View 2 Replies View RelatedMy MacBook is unable to boot. Whenever I try to boot, the spinning circle and the progress bar appears on the grey screen, but when the progress bar reaches about 40%, the computer shuts itself down. I started in Verbose Mode and tried AppleJack, and it said my harddisk needs to be repaired; but AppleJack is unable to do that. (Error Messages: "Invalid node structure" and "Incorrect number of thread records) I then tried to startup with both Recovery HD and Mac OS X Install DVD and ran the Disk Utility on both of the startups. At the First Aid tab, I selected my Hard Drive (not the Hitachi one, the Macintosh HD one) and clicked on Repair Disk. The error messages I got from Repair Disk were:Invalid volume file countInvalid node structureThe volume Macintosh HD could not be verified completely.
Error: Disk Utility can't repair this disk..disk, and restore your backed-up files. And, lastly, the following popup message appeared:Disk Utility stopped repairing "Macintosh HD"Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files. Not being sure how to back-up my files using Disk Utility, I plugged in an external HDD to my USB port and clicked on the Restore tab in the Disk Utility. As the Source, I selected Macintosh HD and as the Destination, I selected one of the partitions I created on my external HDD. However, when I clicked on Restore, I got the following error message:Restore FailureCould not restore - Input/output error I partitioned my external HDD by creating 2 partitions formatted in Mac OS Extended Journal - GPT. Now, what can I do to save my files (and my MacBook's HardDisk)?
About a week ago I purchased a 2007 Macbook off of Ebay. It arrived in the mail and i opened it only to find out he had not deleted a majority of his content. I looked up how to reset it and I did. It turned back on and displayed a Mac OS X Utilities page. I tried repairing my disk and that didn't work. I tried erasing it & after a couple of times that worked. Except I cannot get past that point. I have no Time Machine back up since I just purchased it. So I decided to try my last option and tried downloading Lion. It had asked for my Apple I.D. and I typed it in and once i clicked continue it said that "iTunes is temporarily unavailable" so I tried it again. Nothing. I even tried my mother's I.D. It still comes up saying that it is temporarily unavailable. I cannot access it. I'm stuck on that Utilities page and cannot access anything.
Info:
MacBook Pro, OS X Server
i come from the pc world and am learning on a new mac. i want to access the utilities folder on install disk but cant seem to figure it out. in windows its right click explore. what is the trick on a mac?
View 1 Replies View RelatedWhy does Disk Utility not repair my Epson software? The same list of software appears after each repair.
Info:
MacBook Air, Mac OS X (10.7.3)
why I have to check & repair disk permissions every time I have to restart my MacBook Pro. When I do the check I get various messages eg 'Library should be '0', is '80'. And other variations for Library.
Info:
MacBook Pro, Mac OS X (10.7.2)
Disk Utility says there are a bunch of disk permissions that need repairing. I hit repair and disk utility says that it repaired those disk permissions. But when I verify, it says they still need to be repaired.
Info:
Mini 2.4Ghz, Mac OS X (10.6.8)
I am trying to repair my disk so I can install bootcamp, but when I reboot my machine and run disk utility and choose repair disk, it hangs. Does anyone have any ideas ?
View 8 Replies View RelatedMacbook Pro running on OSX Mavericks is having problems.
Today I turned my Mac on, and it started up with a loading wheel and a loading bar. When the loading bar finished, the Mac turned itself off. I tried many times, same happened every time. I then went into OSX Recovery, started repairing Macintosh HD, but the error message saying "Disk Utility can't repair Macintosh HD" came up and now I don't now what to do.
Is there any way I can back up my files in this situation? Is there any way I can repair the disk without having to erase all data and reinstalling OSX? Or do I really need to bring it to a Apple Store for repair?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
I try to renovate my certification, I couldn't, and then I can't find the "keychain acces app" in utilities, or applications or even spotlight.
Info:
iMac (27-inch Mid 2010), Mac OS X (10.6.8)
I have a Time Machine a a multiple partition. The TM disk didn't properly disconnect and now have disk error. I'm repairing disk through Disk utility. It's taking forever to fix. The drive is 400GB.I can stop repair but it's been repairing for an hour.
Info:
Mac OS X (10.7.4)
I have an external WD drive in a self-enclosed case, both purchased from OWC, used for my Time Machine backups. The disk and backups have been running just fine since I began using this disk over a year ago.
When I plugged in my disk yesterday (USB), it didn't mount. I ran Disk Utility on my 'Time Machine' partition, starting with verify disk. It reported that it needed to be repaired. When I run repair, it runs for several minutes and I see information of what is being done -- incorrect block count for file shutdown_time, incorrect block count for file permStore, etc -- but I always ends with "Disk Utility can't repair this disk" and that it needs to be reformatted.
I've run Repair Disk multiple times, all with the same answer so it seems running it again won't change the problem. Reformatting and starting fresh with Time Machine seems to be the only course of action
What specific issues should I be aware of as I reformat my Time Machine drive/app partition?
Info:
iPhone 4S, Mac OS X (10.7.4), MBP, 2.4 GHz Intel Core i7
I have the "show detail" box checked but Disk Utility is not showing detail.It goes through verify and repair, says it is finished, but shows no files. I have never had No files need repair.My computer has been slow and erratic and usually running Disk Utility works, but not now.
Info:
iMac, Mac OS X (10.7.1)
I just saw that the amount of memory left on my HD just dropped around 60GB, so I used the "Verify Disk" option on Disk Utility, and the output was: Verifying volume “Macintosh HD”Performing live verification.Checking Journaled HFS Plus volume.Checking extents overflow file.Checking catalog file.Checking multi-linked files.Checking catalog hierarchy.Checking extended attributes file.Checking volume bitmap.Checking volume information.Volume header needs minor repairThe volume Macintosh HD was found corrupt and needs to be repaired.Error: This disk needs to be repaired. Start up your computer with another disk(such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
I don't have the disk right now, so is there some other way I can repair it, get another install disk, or anything else? I've been thinking of booting up with a Linux livecd, but can it access the HFS+ filesystem?
Info:
MacBook, Mac OS X (10.6.8)
The problem is with a mbp running Snow Leopard. I created a dual boot with win 7. I was playing around with the partitions, and at one point installed SL on both partitions, sure i did some other bone head moves that i can't remember. Now cannot remove the second partition. I think i may need a boot disk with a application to partition the HD from the disk?
View 1 Replies View RelatedOur macbook woke up with a blinking hard drive. I went to boot up with a CD and run Disk Utility, and used the install disk that came with our Mac Mini.
Instead, it says I can't install on that mac, and all options are disabled.
I didn't expect to be able to install from that disk, but why can't I even use disk utility?
Obvious answer to obvious question - I can't find the Leopard disk I used with the macbook.
For some reason when I'm trying to erase a CD in Disk Utilities, after clicking the "Erase" tab, every button under it is disabled. Including the "Erase" button. I tried various CD-R's, what's the deal?
View 14 Replies View RelatedDoes Mac OS X Disk Utilities correct permission on all the files and folders on the machine? or is it only on systems folders? If I need to correct permission on every file and folder on the machine, how do I do so?
View 7 Replies View RelatedRan routine disk utilities and Yasu. Now Safari wont load off dock, ap folder. Tried to trash and reload. Wont allow it.
Info:MacBookPro, Mac OS X (10.7.3), Safari 5.1.5
I've been using OSX since OSX.1 and I have yet to run into a time where Disk Utility did not come up with False Positives. In latest version Yosemite, all Print Driver components from all supported manufacturers that are part of Yosemite, show up as false positives. I haven't counted but seems close to 100 +files.
What I would like to know is. Why is it so tough for the systems developers which mst likely some of the best in the world, Ca not come up with a script that would monitor Disk Utilities for false positives and mark them as invisible after say the third run. This would be reset each time a new Disk Utilities version comes out.
How long has OSX.1 been out 15-20 years? You would think in that period of time this issue would be fixed. I realize as OSX used FreeBSD UNIX that it is a Constantly moving system being updated al most daily. But still you should be able to come up with something to prevent wasting tim repairing items that don't need to be repaired.
I used Mavericks previously a smaller portion of the same Driver files came up as false positives. When I switched to Yosemite the list grew 3 fold.
Info:
MacBook Pro, Mac OS X (10.1.x), Yosemite OSX.10
