My former, babied, 400mhz overclocked by Daystar to 550mhz Titanium Powerbook has a fried logic board. Can I put a the old low resolution Tibook screen on a 1ghz Tibook body with a higher resolution screen?
Would it just power on at the lower resolution or is this just idiotic?
So my Pismo died shortly after I added an addtional 133Mhz 256MB RAM module to it. Don't know if the daughter card CPU connector socket is no longer making excellent contact, or I just static electricity shorted it (RAM transfered to new TiBook works just fine, so probably something more serious like logic board or PS gradually dying was what lead to kernal panics and finally only booting up to chime sound and black screen)...but long story short after lots of searching/troublshooting, I got a used 'dealer refurbished' 1Ghz TiBook from Wegener Media. Cost more than a alum PB, but it's the fastest dual boot (yes, I know, but I still want OS9.2 bootability) laptop in Apple's line. Only problem when I received the system, I did Apple Profile on it, and found no Airport Card installed. Sent an email to Wegener and got a reply that there were at least 9 different configurations of 1Ghz Tibooks, and that Airport Cards where a "CTO (configure to order) optional, not stock, item"...in Wegener's words.
View 2 Replies View Related I have a 400 mhz Titanium powerbook I'm trying to resurrect for my teen daughter. Just replaced the internal pram battery, the external regular battery, and the a/c cord, all with brand new parts. The book was dead, and now I have power but not much more.
When pressing the power button I get one chime, and then I can hear the fan working, but no hard drive sounds. The screen is black.
Eventually, when left sitting, the thing will turn itself off. It seems as if it is not booting completely, but then I can't see anything. I am used to hearing hard drive pops and whirrs though, and nothing here.
1. I tried resetting the PMU with the button on the back of the unit.
2. I tried resetting the pram with cmd/opt/p/r before power, but no matter how long I hold I only ever get one chime.
3. Tried booting with my OS Tiger retail CD (which is what is installed) and the drive barely spins, and the screen remains black. Holding C doesn't help.
4. The new battery is charging normally.
5. I tried removing the two ram sticks, moving them around from slot to slot, and using one ram or the other. Nada.
6. Tried forcing shutdown by holding power button 10 secs, then rebooting. In fact, that's how I have to shut it down when I need to, since I can't see anything.
This laptop has been in storage for about a year. This is the same problem I had when I put it away. I think perhaps the laptop might have been knocked off the coffee table and fell about 2 feet to the floor a short time before these problems. I heard it, but the kids won't admit it. *grin* It worked fine for about a week or so, then began losing video at startup.
I just spent about $75 in parts. Should I maybe try a new PMU board before chucking the thing? Any other ideas what might be happening?
I've read till my eyes are blue, and can't seem to find a boot issue with one chime on this machine.
Does anyone know if I can swap a VGA Tibook LCD screen onto a DVI Titanium Powerbook? Is the higher resolution in the screen set up itself? I actually wouldn't mind at all if it would work because I actually like the lower res screens of the earlier tibooks. Just wondering if it can be done.. and I don't mean taking out the actual LCD screen itself from the Tibook case and frame, I mean actually SWAPPING the LCDs and plugging them in. I just wonder if the older LCD could be plugged into the logic board or not. It seems that they would fit the case. I'd really like a faster DVI Tibook with the lower res screen because the font sizes are larger.
View 3 Replies View RelatedMy tibook .867Ghz was working fine this morning, but now when I restarted it this afternoon, the colors are all off (lots of green and rapidly vibrating pixels in background). The computer works, I can run programs and so forth. There are no changes to the displays settings, still 1280x854 and colors "millions". When I switch to thousand or 256 colors there is no significant change.
View 2 Replies View RelatedI am (or was) sure that I could - be a recent experience with a new (TN panel) LG LCD monitor 20.6inch 1600 x 1050 native res. (LG L204WT) has sown some doubts. Basically, the external monitor would go blank after a few minutes or secs after scrolling around opening windows etc. Not to powersaving mode but just blank. Only unplugging the DVI cable, rebooting the powerbook and reconnecting the DVI would bring it back to life, only for same thing to happen.
View 3 Replies View RelatedI have an old Titanium Powerbook that wont startup. I haven't used it in about a year.
I've tried keeping it on charge for a day with and without the main battery inserted (which was knackered before I stopped using it anyway).
Any thoughts on what could be wrong with it? An internal battery problem?
Fixing up my old TiBook to sell and discovered the CDRW is playing up reads some dics OK but makes a horrible crunching noise when ejecting, not good. The original drive is a Matshita CW-8121 but I can't find any for sale, what can I replace it with that's current and supported? And pref cheap on Ebay.
View 1 Replies View RelatedI have the 1GHz Ti Book, 15", 1GB PC133 memory, 60GB 4200 RPM drive, Tiger, and it's awesome. Battery is basically dead (10 min). I do typical web/email stuff.I also do some music recording and it works fine. Watching video is difficult on [URL] though. I need to upgrade to Leopard as I want to start doing Web Development using Rapid Weaver. The new version of Rapid Weaver requires Leopard. So, while I'm planning on purchasing a new machine soon, I wonder if it's worth spending the money to:
1) buy Leopard for my TiBook (are there performance issues?)
2) buy a 7200RPM drive (for performance)
in order to run Rapid Weaver 4.0 or not.
I running a 400MHz sawtooth Family #M5183 my friend gave me with a 40 gig hard drive running OSX 10.3.9. I just picked up at the swap meet a Qwicksilver Model No.M849 PNG4 1GHZ DP/2M CACHE/512MB SDRAM? 80GB HD DVD-R/CDRW/Nv17 DUAL/56k MDM/GIGE it is missing the HD from under the superdrive can I just plug in the HD from my Sawtooth and run her? She still has the HD in the bottom its a 80 gig IBM Deskstar. When I opened my Sawtooth I found that there is a Seagate Cheetah model#*ST118202LW* Its not even plugged in!!! How many gigs is it and can i run it for more space? I have three 512 cards for memory. Can I use the video card from the sawtooth to run a second monitor? If this all works whats the newest operating system I can run? As soon as I get the money I am going to swap the processor and bring her up to speed. I am a singer/songwriter on a budget trying to put my studio together,I run live sound and make Hand Drums.I'm not a computer tech by no means but I do ok running a mouse to get a good sound. If you are going to tell me to wrap machine in tin foil and put it in the freezer PLEASE don't waste my time!!!!! I just want to build my machine correctly and not f@#$ anything up.
View 6 Replies View RelatedI've searched high and low for any and all alternatives to working with my, shall we say, "experienced" Powerbook Titanium, despite it's age(it's not old, it's chronologically advanced!). After looking things up and being able to think of nothing, I figured I'd finally register here and hope for some good advice from people who possibly know more about Mac hardware than I do.I received my laptop in June of 2002(it was likely bought either that month or April) from my father. As far as I was aware, it was a brand new Powerbook bought from Comp USA...with the latest specs and peripherals at the time. After 7 years of using and loving my laptop(despite the fact the battery is completely dead, both hinges are broken and removed to keep the wires from accidentally being cut until I can afford new ones, and the CD drive no longer working), it's come to a point where I'm needing to try to breath even a little new-found life into my true love...or be stuck using "The Rex", my overbearing Desktop PC with its snooty Windows XP and massive noise-creating fans.
View 2 Replies View RelatedMy TiBook 15" G4 (OSX 10.4.8) has an Airport slot but no Airport card. I got a Sonnet Aria Extreme card but it shows nothing on the TiBook � not in the menu bar or in System Profiler. I've tried restarting with and without the card inserted. The Sonnet support guy suggested everything I had already done and then came up with "Check under the keyboard to be sure the cardbus connection was intact." Seems fine. I'm assuming the card has the Broadcom chipset because they swear it works fine on the 15" TiBook G4.
Also, Airport software is updated, but doesn't show or function because it doesn't see any wireless capability.
Like everybody else who gets frustrated, I've also done everything again 4-5 times, just in case the computer or the card might forget that it doesn't work.
So here's the deal. I have an 800mhz tIbook that I had to replace the DVD/CDrom drive and hard drive to get working properly.After I did that I've been having issues with the backlight. It worked fine for a couple of days then started blanking out. The machine would boot and it would be on for a second, then blank out (just the backlight, not the LCD itself). So I know it's CAPABLE of working. I took the machine apart a few more times and couldn't find a pinched wire or bad contact or anything.
Thoughts on what the issue could be? It's driving me up a wall. The only thing I can think to do at this point is to replace the backlight inverter board (the thing attached to the CD-Rom drive) as well as the wire that connects it to the logic board.Is there anything that I'm not thinking of? I'm so annoyed because it did work just fine for a day before doing this!
I have a very old PowerBook that did have OSX running on it fine. Recently it has stopped working completely and when you startup it takes you to a blue screen with a question mark and a finder icon flashing on top of a folder. If you give it long enough it will just shut off. I have tried booting from a CD but I can't seem to get that to work. I boot up holding down the option key and it brings me to a window with a picture of my hard drive and a picture of the CD drive but when I click the cd drive and then click the forward button it merely acts like it's refreshing the list and doesn't actually boot from the CD at all. I've also tried holding down C during boot up but it ignores that and just goes to the same old flashing question mark and finder icon screen. The CD I am trying to boot from is the same OSX cd that I originally installed OSX on this computer from so I know it works.
View 2 Replies View RelatedI'm in the process of repairing a TiBook, 1GHz DVI. I need a new LCD, but I'm not sure if I need one from the specific DVI model, or if any 15" screen will work (from a TiBook). I think I'm going to need the DVI LCD, but the other LCDs are a lot cheaper, so I wanted to ask.
View 3 Replies View RelatedI have a G4 powermac 400 mhz with os panther 10.3.9 installed Can this G4 be upgraded to Tiger and if so which version.There seems to be many versions of tiger ie some say amd or intel etc If i can upgrade which version should i look for
View 10 Replies View RelatedI bought 4 G4 towers of eBay for �85.. none have Hdd's so havent tried them out yet (two also have no graphic cards) I got a mix of ram size and speed (pc100/pc133) however thats not my question
Next to the ram slots theres a red light that comes on, is this normal? I've tried to do some research on it and some people say it is, others say it isnt.
I plan to sell them off again on ebay but I did it mainly as a project to keep the G4's alive. Any suggestions on graphic cards (cheap ones too)?
I have 512mb ram which works fairly well but am thinking of upgrading to 2 gigs before i upgrade to leopard have you experienced any significant speed gains?
View 2 Replies View RelatedI want to do this to increase the speed of my sawtooth. I think that the dual 500mhz was the last apple processor that is compatible with the sawtooth because they both run on 100mhz busses, correct?
View 4 Replies View RelatedI just restored an old 1999 G3 iMac DV 400MHZ with slot-drive from the dead, and I feel it lacks a bit of power under it's hood. I already put RAM and HDD but the computing power is just not enough. What I want to do is go into OpenFirmware and speed up the cpu and possibly the bus, I remember doing so on my sawtooth but I can't find the code plus that was a G4 and now I have a G3. I also found this page [URL] that shows how to mechanicaly overclock up to 1GHZ but I want to be able to do it non physical if possible. I know this isn't the hot topic now a days but maybe some of you will remember what they used to do and feel some nostalgia(is that a propper word?).
View 2 Replies View RelatedI have a G4 PowerMac 400Mhz running OS 10.4.8. The graphics seem a bit slow at times and I was wondering if upgrading the video card from the current ATI 16MB to a GeForce2 32MB would help? I have 1GB of memory so I know I am good there.
View 6 Replies View RelatedI have a 17" PowerBook G4 1gHz with 1gb of ram currently installed (2x512). Technically this is the maximum ram for this computer according to Apple. I have heard I can upgrade to 2gb (2x1gb) and the reason for the limitation in the original spec was the 1gb ram stick for PowerBooks did not exist when the computer was released.
View 5 Replies View RelatedToday I was planning to build in a second harddrive into my old G4 tower. So I did this. But after installing the system won't boot anymore from the OS X Tiger partition. I have tried all sorts of jumper settings, from slave to master to cable select. All without success.
When I boot from the Tiger installation CD diskutility does not even recognize my original master drive nor does it recognize the new slave drive. I even tried to boot from an old OS9 disk to initialize the disk. I tried formatting it in another machine to HFS Journaled, no success in booting mounting the disk whatsoever.
I recently added some extra RAM's but i doubt these are the problem since my machine DOES boot without having the new disk installed in the system.
It is a 60GB Maxtor drive, so it is within the maximum amount of GB's possible for these older machines.
[URL]
Just installed one of the original airport cards in this machine, and though all indications are that it is working correctly, it doesn't see the USR wireless router sitting 10 feet from it. No networks show up in the dropdown list, and manually adding does nothing. Encryption is a simple MAC filter (this card has already been added), and SSID is broadcast. Did I get a bad card? System profiler seems to think it's fine.
It's an original airport card.
Computer's a G3 400 Mhz iMac.
A G3 300 Mhz iBook with original airport card is having no troubles.
Firmware of Airport card is 9.52
Firware of router is up to date.
OSX 10.3.9
All help greatly appreciated; this is my moms little computer, and we're trying to rearrange and loose some wires.
I found one on craigslist for $15 but want to make sure it will work, or if I do get it and try to install it I want to make sure I don't break my computer.
View 7 Replies View Relatedmy video card went out on one of my G4 towers. [URL] The card that was in it was an Nvidia GeForce 2 MX and it ran Leopard 10.5.8 pretty nicely. I figured I might as well get a better card and see if it runs smoother. Can I put an Nvidia GeForce 4 MX in, or do I even want to? I want a good video card, preferably with an ADC connector as I still use my original monitor.
View 19 Replies View RelatedI have been viewing the forums for the past few months and have finally joined MacRumors as I have purchased an ibook G3 (first mac). I love it to death, it is so portable and even runs like a champ considering it is almost 4 years old. The ibook has a 800MHZ G3 processor along with maxed out ram at 640MB. Anyway I am planing on buying an TV before school starts up again and would like to encode my dvds to h.264. I was wondering if my computer can handle this task. BTW I would need to buy a dvd drive for my computer along with an external HDD. My other option is to buy a friends Powermac G4 with dual 1GHZ processors(he is selling it at $250) it already has a dvd drive and two 200GB HDD so that will save me ~ 150. As I am new to macs and would like to know if the Powermac will significantly make a difference in encoding times or should I just stick with my ibook and save the $100?
View 6 Replies View RelatedI have been searching high and low for a alternative heatsink for a dual 1Ghz G4 CPU. I just got this chip off Ebay, but by dual heatsink, that works with a dual 533Mhz, won't fit. And I can't find anyone who is selling just the heatsink.
View 1 Replies View RelatedI have no sound, and the volume buttons don't work. When I turn the system on I get the "bong" but after that I can't seem to get anything. In system settings, it says there is no audio output device.
View 1 Replies View RelatedWondering if it makes sense to sell my QS dual 1ghz and get a Mac Mini C2D or upgrade the QS with a faster video card (Ati 9800 pro, about $120 on ebay). The QS already has a fast HD and 1.5gb ram. Looks like either option would be about the same price. I won't need to upgrade either Mac in the future, it will be the home Mac (A new Mac Pro after 1/15 will be my main Mac at work).
View 10 Replies View Related
